How can the tempered film be pasted well, and how can the tempered film be pasted

After the tempered glass film is bought, it generally has all the tools required for the film, such as dust-free cloth, alcohol wiping bag, and dust sticker.

1. When tearing off the tempered film on the original screen, you need to operate slowly, because the tempered film has been pasted on the screen for a period of time, and the adhesion between some tempered films and the screen will be very large.

2. After the mobile phone film is used for a period of time, there will be obvious dirt on the surface of the screen, at this time, you can first wipe the screen with a wiping cloth (wet cloth), and then use a dust-free cloth, and finally if there are still water stains left, you can wipe it again with a wiping bag (dry cloth).

3. After the above cleaning, the screen is generally relatively clean, but there may be some small dust, at this time, you can use the dust paste to paste the surface of the screen again, so that it is very clean.

4. Take out the tempered film, the tempered film generally only has the No. 1 label, and tear off the protective film of the No. 1 label.

5. Hold the torn side facing the screen, align the hole and gently put it down.

6. After the tempered film is put down, there may be two situations.

1) The tempered film has not yet been attached to the screen, and the tempered film floats on the screen, at this time, if the hole position is not accurate, you can fine-tune it, and gently push the edge of the tempered film with your mobile phone to adjust the position. After adjusting the position, press your finger to the middle of the screen, and the tempered film will automatically adsorb on the screen.

2) The tempered film is quickly and automatically adsorbed from the edge.

7. After the tempered glass film automatically adsorbs the screen, there may be some small bubbles, at this time, you can use a dust-free cloth to gently wipe back and forth a few times to press down these small bubbles, and you're done!

How to paste the mobile phone tempered film, learn the mobile phone film in 1 minute, and never spend money to paste the film again.

The mobile phone film is not the original Samsung product, can not provide you with the relevant parameters, the mobile phone does not affect the use of the mobile phone, but the film can effectively avoid some sharp objects to cause direct damage to the screen, you can choose the right mobile phone film according to your personal preferences.

There are a lot of films at the subway entrance, and it is not easy for people in winter, if you are afraid that you will not be able to paste it well, you will spend 10 yuan to be pasted.

The new machine purchased will generally have a layer of disposable plastic film, which can be removed when used.

When the mobile phone leaves the factory, the screen does not have a film, but please rest assured that the screen of the machine has been tested for scratch resistance before leaving the factory to prevent wear and tear within the normal operating range, and it will not affect the use without film. However, the film can effectively avoid some sharp objects from causing direct damage to the screen, and you can choose whether to apply the film according to your personal preference.

If you need to purchase a film, it is recommended that you contact your local service center or specialty store to inquire about the purchase. You can check the service center information and dealer information through the official website.

The most important thing is to fit, check whether the screen has fallen dust, tear off the plastic sticker of the tempered film, contact the top of the tempered film with the mobile phone, position, put the tempered film down with the right hand, determine the direction, slowly put it down, and the tempered film will be automatically laminated. If your hands-on ability is really not good, you can buy a film artifact, a small frame of film, stuck on the mobile phone, and the tempered film will be directly and automatically pinpointed, and it will be posted easily.

Tempered glass mobile phone film is a new mobile phone protective film launched in China in 2012, which is a high-end new product with the most enhanced protection for the protective screen.

The thickness of this protective layer is only millimeters, which can completely cover the original screen surface, prevent damage and scratches by external forces, and increase the impact absorption, which is 5 times higher than the standard of PET film. It does not affect the effect of the screen.

If you want to paste the tempered film, you must first prepare the tools to be used for the film, tear off the old film from the mobile phone, then use the dust suction film to wipe off the dust on the mobile phone, and then wipe the mobile phone screen with wet wipes, then wipe the mobile phone screen with dry wipes, and finally take out the new tempered film and align it.

Detailed pasting method: 1. If the original protective film is pasted, paste it with the label of Jingchi and open the original film;

2. Clean the surface of the screen, if there are many stains, you can wipe it with an alcohol bag first; Then clean the screen with a blue electrostatic precipitator film;

3. Tear off the protective film on the tempered film, aim the glass film at the vacancy and edge, and slowly put it down;

4. Gently press the center of the film with your fingers to make it automatically adsorb on the screen;

5. If there are some small bubbles, wipe them vigorously with a dust-free cloth to remove them.

In life, our mobile phones will inevitably be worn, bumps, and the phenomenon of collisions will occur, which will cause damage to our mobile phones for a long time, and it may be necessary to replace the mobile phone screen. The characteristics of the mobile phone film are to protect the mobile phone screen from scratches, and the tempered film also protects the screen from bumping, but the hardness of the current screen is generally nothing with ordinary bumps, but if there is no film for a long time, there may be scratches because the screen touches hard items.

Now a large number of people do not stick the film, because the thickness of the more popular tempered film will affect the feel, but with the development of science and technology, the thickness of the mobile phone film has been greatly improved, and there is also a liquid nano mobile phone film, so the inconvenience of the mobile phone film is now less and less.

Materials required: mobile phone, tempered film, vacuum film, dry and wet erase, hard card.

1. First of all, use a dust suction film to stick the dust off the phone.

2. Turn on the wet wipe, wipe the screen with the wet wipe, and dissolve the dirt on the wet wipe.

3. Wipe the screen with a dry paper towel again, and then the screen will be wiped very clean.

4. Take out the new tempered film, from top to bottom, and slowly stick it on the speaker.

5. Gently press the screen with your fingers.

6. Finally, scrape the place with bubbles with a hard card and squeeze out the bubbles, so that the tempered film is pasted.

Tempered glass film is a kind of protective film launched in the United States in 2012, and it is now the most powerful protection for protecting the screen. New products, often used in mobile phones, computers and other digital products. Below I have collected and sorted out the method of pasting tempered film for you, I hope it will be helpful to you!

Tools MaterialsMobile phones, alcohol wipes, cleaning wipes, film artifacts, dust removal stickers, tempered glass films.

How it works:01 Use alcohol wipes to clean the surface of your phone and dry the surface of your phone with a cleaning wipe.

02 Use dust removal stickers to remove fine dust from the mobile phone screen and banquet screen.

03Install the film artifact.

04 Find the direction of selling the film, and put the tempered film into the film artifact. And press lightly with your fingers to make the tempered silver burning film bond with the phone.

05Finally, remove the film artifact, and then clean the surface of the phone with a cleaning towel to complete the film.

Take out the tempered film, the tempered film generally only has a No. 1 label, and tear off the protective film of the tempered film. Hold the lower half of the tempered film with your hand and place the upper half on the phone screen.

Tempered film (tempered glass mobile phone film) is a new mobile phone protective film launched in China in 2012, which is a high-end new product with the most enhanced protection for the screen.

With a thickness of only millimeters, this protective layer can completely cover the original screen surface, prevent damage and scratches from external forces, and increase impact absorption, which is 5 times higher than the standard of PET film. It does not affect the effect of the screen.

About Tempered Film:

Tempered film refers to the ultra-thin mobile phone film made of tempered glass, which has the functions of anti-wear and explosion-proof. In general, sticking a tempered film can prevent the mobile phone display from breaking, but it cannot prevent the breakage caused by the side collision, that is, knocking the corners of the mobile phone. There is a certain chance of breaking, and the structure is that the glass is tempered.

To put it simply, it is an extra-thin film made of tempered glass, which has the functions of anti-wear and explosion-proof. That is, ordinary glass is tempered. Generally speaking, sticking a tempered film can really prevent the mobile phone display from breaking, but it can't prevent the breakage caused by side collisions, that is, knocking the corners of the mobile phone.

There is a chance to shatter. The structure is that the glass is tempered.