The wired microphone I bought didn t change the sound quality at all, what happened?

Hello, the wired microphone you bought, there is no change due to value after use, it may be that the model of your microphone does not match the equipment you are using.

It is also possible that the connection is not correct, you carefully look at the microphone to the instructions for use, follow the correct connection method, if these are not problems, it means that there is a problem with the quality of the microphone you bought, take a closer look at what type it is.

Small speaker in the lower right corner, turn on the volume control, turn up the microphone, and then tick the microphone enhancement in the advanced section under the microphone. If there is no microphone or advanced item in the volume control, check the microphone in the options and properties, and change the item in the mixer, and the microphone and advanced item will come out. You can also try ticking the front pink in and rear pink in.

It really doesn't work, maybe there is a problem with the drive. Use the driver wizard to update the sound card driver.

If you buy a long microphone, if you want to change your luck, there is that kind of optimization, so when you buy a microphone, you should choose a microphone that can optimize the sound quality to change the sound quality.

If the microphone you bought has no sound quality, it may mean that his sound quality is wrong, or it may be a problem you set, it is recommended to refer to the cross talk manual to see.

It may be that the quality of the microphone you bought is a little problematic, so the sound quality is not good, and it is recommended to change to a better one.

The wired microphone I bought didn't change the sound quality at all, what happened? Is this your own, well, the reason why there is no adjustment or the distance you have to take the amplifier to adjust it, I think you can also consult the after-sales service.

However, the wireless microphone you bought, there is no sound quality at all, if this changes, then you go to return it and say that this is not good, or it is possible that you just haven't adjusted it well.

The microphone doesn't change the sound quality at all, it could be that there is something wrong with the microphone.

If you want to have a change in sound quality, you need to change the push device, because this device doesn't push as strongly and doesn't fully play its role.

If one of your microphones has no sound and it hasn't changed, it must be a problem with your settings, so try to check the relevant manual, how to solve this situation.

The sound quality of this microphone is already like this, and it can no longer be modulated in post, so it can only be replaced with a new one.

This is not clear, ask the merchant, this kind of thing is recommended to go to a reliable merchant, buy ** almost.

If there is a problem with the sound quality, I think you can still buy one, the key is that it is important on his side, you see that it will be repaired.

First, first confirm that the hardware is fine. If the speaker is fine, the sound card is fine, and if you've tested it on other machines and it's really good, then you can read on.

2. Make sure all the cables are exactly right. Then power on the speaker and turn on the volume switch.

3. Install the driver of the sound card correctly.

If you have an onboard sound card, it's a good idea to install the drivers provided on your motherboard's driver disk.

In fact, the computer does not make a sound, and many times it is because the sound card is not driven correctly. In general, after the sound card driver is installed, it is located in the taskbar in the lower right corner.

There will be a little horn in it.

icon. Fourth, if you are sure that the driver is installed correctly, then take a look at the volume settings in your computer.

The specific method is to double-click the speaker icon in the taskbar, and check whether the volume is turned off to the minimum in the "Volume Control" and "Waveform" dialog box in the pop-up "Volume Control" and "Waveform".

If these two options are not available in the dialog box, click on the "Options" menu - select "Properties" - select "Volume Control" and "Waveform" in the "Show Volume Controls" and then set them correctly.

Note: Step 4 can only be set up after the driver for the sound card has been installed correctly.

According to your description, there are two types of sounds that can come and go:

If you try to change to a microphone that is definitely normal, it is still the same, and you can basically determine that there is a problem with your amplifier. The problem may be in the microphone jack, or it may be the poor contact of the line in the power amplifier, which should be intuitively found when you open it to check;

If the microphone returns to normal after changing, then you can determine that there is a problem with your microphone, and the problem may be inside and outside the plug of the microphone, it is recommended to wipe the plug of the microphone with gauze paper a few times, so that the oxide layer on the outside disappears, if the problem is still solved instinctively, open the microphone to check whether the wiring connection inside is intact.

Did you have this problem with your previous microphones? If not, it's a microphone problem, see if the microphone jack is of the same type. It is best to read the microphone manual, and the parameters of the amplifier.

Don't know if you're connected in** with? Whether it is connected to the mixer or used on the power amplifier, it must be connected to the MIC special jack so that the volume will not be small, and in special cases, the microphone amplifier must be used.

If you can't use the microphone with your speaker plugged in, you can try the following solutions: Make sure the cable is connected correctly: Make sure the plug of the cable is properly connected to the speaker's microphone connector.

Check that the plug is fully inserted and that there are no loose or disconnected cases. Check microphone settings: In your computer or speaker's settings, confirm that the microphone has been correctly selected as the audio input device.

You can go to the computer's sound setting or speaker settings interface to check whether the default recording device is a microphone. Adjust volume and gain settings: Check your speaker's or computer's volume settings to make sure the volume is moderate and not muted.

At the same time, you can try adjusting the gain of the microphone to make sure it receives the appropriate volume. Test a different microphone or device: Try connecting to the speaker with a different microphone or device to see if it's an issue with the microphone itself.

If the other equipment is working properly, then it may be a malfunction of the microphone itself.

Hello, I have helped you find the results; If your speaker can't use the microphone after plugging in the data cable, there are several reasons and solutions:1Chose the wrong jack:

Make sure the microphone is properly connected to the speaker's jack. Some speakers may have multiple jacks for different functions (e.g. audio in, audio out, etc.). Check your speaker's instructions or logos to make sure you're using the correct jack.

2.Audio settings are incorrect: In your computer or device's audio settings, you might need to manually adjust the options for your input or recording device.

Make sure that the audio input device is set to the correct microphone or microphone and that the volume is set appropriately. 3.Driver issues:

If the device you're using has drivers or software, make sure the drivers are installed correctly and updated to the latest version. Sometimes, you need to install a specific driver for the microphone to work properly with your speakers. 4.

Damaged cables or jacks: Check the cables, plugs, and speaker jacks to make sure they are not damaged or loose causing poor connections. Try replacing a different cable or using a different jack to see if the problem is with a damaged portion.

5.Compatibility issues: Some microphones may require a specific adapter or adapter to connect and use properly with the speaker.

Make sure the devices you're using are compatible with each other and follow the manufacturer's recommendations and guidance. If you still can't solve the problem after trying the above methods, it is recommended to consult the relevant technical support personnel or contact the manufacturer of the speaker and microphone for more detailed help and guidance. I hope I can help you, and I wish you all the best.