Should I give up wire cutting, about the question of wire cutting

Learn more. A little more understanding of the mold structure will be of great help to you in this line of work in the future. When we learned this business, we had been doing it for three years and it was only 1400. Even if prices are skyrocketing now, the wages of that association are pitifully low.

In fact, when I was studying, I used a little dim sum, and I did it for more than a year and found a 2500 outside, which was no problem at all. If you want to have a good development, you can learn programming and 3D software, such as UG, PROE, and change to design. Of course, this is just working for someone else and getting a dead wage.

If you have the opportunity and have the funds, you can start it by yourself or in partnership, first get a few perforating machines, or grinders, or spark machines, and start small. Wait until the funds are sufficient, and then make it bigger. Others have also come up step by step like this.

In the early stage, the customer relationship should be good, even when working for others. People need to know more. Pay more attention to the material supplier. When the time comes, what can't be done? Bosses are not born.

On the top 3rd floor, I agree with you, I also do wire cutting, and now I have been working with my brother and sister in a processing shop for a year, and although I failed, I believe that I can come back to life.

I suggest you give up your girlfriend!! Don't give up on wire cutting, if you think it's good, try to do it well!

26 doesn't seem to be young anymore, hurry up

Hello, dear <>

Here, according to the questions you provide to you, I will inquire about Yi Minhongxia: Hello, wire cutting is a work that requires a high degree of skill and patience, and requires complex equipment and sophisticated instruments. In addition, wire EDM is often a noisy and dusty working environment that requires special protective equipment.

These factors can greatly affect worker comfort and productivity. In addition, wire EDM is often a heavy workload, requiring long periods of concentration and a high degree of precision. This can be a challenge for many people, requiring a long period of training and practice to master the technique.

Finally, wire cutting is usually paid at a low level, which is one of the reasons why many people are reluctant to take up this job. Although wire cutting is an important manufacturing process, due to its technical and labor-intensive characteristics, better salaries and benefits packages are needed to attract more people to the job.

Wire EDM is a machining method that uses electrical discharge corrosion to process the workpiece must be electrically conductive.

Wire cutting is the use of molybdenum wire to cut metal workpieces, that is, EDM corrosion cutting.

In the process of work, attention should be paid to the speed of wire walking, and the thickness of the workpiece and the speed of wire walking should be adjusted to prevent the molybdenum wire from breaking.

I have been doing wire cutting for n years, slow filament.

The case of cutting taper can be divided into the following types.

1: General hardware mold and so on, that is, the usual knife edge, the inner hole of the die into the block is small and large, the knife edge position needs to be set, according to the thickness to set, how to set up depends on the type of machine, the method of setting different machines is also different. Note that the infiltration diameter of the program road is G42G52, and then A is the degree of taper, the positive cone is positive, and the inverted cone is negative.

2: up and down special-shaped, this kind of processing is generally used for sliders, no knife edge, the general degree is relatively large, and not all four sides have taper, the same need to set the knife edge position, the degree is larger, so it is allowed to change to a large water cover processing, one side of the line cut to the water cover affects the speed and accuracy. It's easy to program well!

3: Sloped top. This is mainly used for plastic molds, which is equivalent to the role of the knife edge of the hardware mold, but there is no straight body in general, and there is not a taper around the clump crack, and the program needs to be inserted into the A value, the programming is not good to control the state and if the degree is greater than 5 degrees, it is also necessary to insert a (a value is less than 5) when you want to cut to a straight surface, so as not to cut to another inclined plane!

The cutting taper needs to be set with a knife edge!! Note that there are also machining paths on the program and auxiliary surfaces,!! You can ask my colleagues 40791504.

This is the upper and lower special-shaped, the tomato reed I door is generally set for a degree, I don't know how you set, first to see if you cut the cone or the inverted cone, this is not good to describe with words, but the cutting taper must first be taken to measure the height of the wire frame and the height of the datum.

I've seen it more than once, and there are several situations:

1. When cutting copper or oxygen-free copper, the loss of the wire is almost 0.

2. 15 hours of work per day, no tight wire or less tight wire at all.

3. The conductivity of the cutting workpiece is quite high.

4. When cutting the workpiece, the upper and lower ends of the workpiece are padded with copper blocks for copper plating.

If you want to improve the use time of molybdenum wire, you can use the following methods:

1. Use a gemstone guide wheel.

2. Use water-based coolant.

3. Strengthen staff training.

That's all! Hope it helps!