How to adjust the glasses when they are crooked, and how to adjust the glasses frame when they are c

The glasses are crooked and adjust the steps themselves: tighten the screwsTilt angle, adjust the length and curvature of the nose pads and temples, and adjust the foot covers of the temples

Lock the screws: After wearing glasses for a long time (especially frameless perforated frames), several screws may loosen, and we need to use a special screwdriver.

The locking screws, of course, should not be too tight, and can be properly relaxed, otherwise it will cause inconvenience when using.

Tilt angle: This position needs to be adjusted, which means that the tilt angle on both sides of the temples is inconsistent, and we need to use pliers.

Clamp the pile head and clamp the other pliers to the hinge.

before, make adjustments.

Adjust the nose pads: The adjustment standard of the nose pad must be that the leaf surface of the nose pad is in full contact with the nose bridge bone, and the distance between the eyes of the mirror must be 12mm. It is necessary to twist the root of the nose pad to the nasal or temporal side with a professional nose pad.

, the length and curvature of the temples: The two temples should be symmetrical, and the curvature of the temples should be the same.

, adjust the foot cover of the temples, so that the bend of the foot cover more suitable for the wearer's ears, if necessary, heat treatment, especially in the cold winter, plastic foot cover if not adjusted after heat treatment, often break.

If the glasses are crooked, you can go to the optical store to adjust them.

Glasses cleaning and maintenance method:

1. Use ultrasonic cleaning to remove the dirt inside by vibration, which is generally available in optical stores, which is basically free.

2. When the slot of the lens card of the full-frame spectacle frame is dirty, you can unscrew the screws by yourself, take off the lens and wipe it clean with a paper towel.

3. If the screws are loose, please take them to the optical store in time to tighten them, otherwise the lenses will easily fall on the ground and break. Don't handle it casually.

4. Cosmetics or cosmetic agents and other cosmetics with chemical ingredients are easy to fade the frame, please wipe them clean with a special cloth or paper for glasses.

5. Most of the glasses are gently folded from the left side of the temple, if you are forced to fold from the right side first, it will cause the frame itself to be unbalanced and skewed, resulting in discomfort after you wear it.

6. In order to play the correct function of the glasses, the optical center of the lens should be made in the right position for your eyes.

7. Take the glasses with one hand, which is easy to deform the frame. If the frame is deformed, you should find a local optician to adjust the angle, and do not adjust it yourself, so as not to break the lens and damage the frame.

To open a brand glasses franchise store, you should be familiar with the local market environment and consumer demand, and then choose a good glasses brand, and choose a professional team to develop it, so that the reputation and quality are guaranteed. [Click to learn more about the franchise project].

If the mirror surface of the glasses is uneven, it will cause a situation where one side is close to the eyes, one side is far, if the temples are asymmetrical, it will be high and low on the other side, if the nose pad is not adjusted well, it will leave a mark on the bridge of the nose, as long as the glasses are skewed, it will make the optical center point of the lens can not correspond to the pupil, for a long time, it will make the eyes tired, and more serious will increase the degree, therefore, you must go to a professional optical store to adjust, and each screw on the frame should be tightened before adjustment, before you can start to adjust, Otherwise, it is impossible to adjust in place, the adjustment should be adjusted first, then the temple, and finally the nose pad, the glasses should be adjusted to let you wear, and then look at the curvature and length of the temples behind your ears, with the head down and gently shake the glasses not to slide down, and then according to your overall wearing situation and then fine-tune, glasses adjustment is a science!

After the glasses are adjusted, you must pay attention to the use of both hands when wearing and taking the glasses, otherwise the uneven force on both sides of the frame will cause the frame to deform, if it is often deformed and adjusted, it will shorten the service life of the glasses, and try to put it in the case when not in use, to prevent it from being pressed when not paying attention, and it must be removed when sleeping.

In this case, it is recommended to go to the glasses store and find the staff to adjust and return to normal.

Do not correct it yourself, if the frame is unevenly stressed, it is easy to break, and it should be handed over to the staff of the optical store to adjust.

Hello, if your eyes are crooked, it's best not to adjust it yourself, this is generally in the store where you have glasses, and people can adjust it for you for free.

It is best not to pull the glasses frame left and right, you don't understand the toughness of the material of the frame, and it is easy to wrench. Go to the optician's adjust.

If the glasses frame is crooked from side to side, you still have to go to the place where you wear glasses, let a professional master help you adjust, some glasses frames, can not be broken casually by yourself, or to adjust the balance for you in the case of heating.

If the crooked frame is not very serious, you can fix it yourself. If the glasses belong to the plate, you can directly use a hair dryer to blow it all the time, and it can be corrected slowly. If it is metal glasses, it is best to adjust them with nylon jaws, and remember not to use too much force to avoid damaging the glasses.

1. First, hold the glasses frame with one hand and pinch the nose pad leaf with pliers with the other hand. 2. Then twist in the direction of the correct nose pad position so that the leaf surface of the nose pad is in contact with the two planes of the nose side. 3. How to adjust the opening angle of the temple.

1) Metal frames.

Use your thumbs to push both nose pads inward, closing the spacing until you are comfortable to wear 2) plastic sheet glasses.

Heating with a hair dryer on the desired bend for 30 seconds will soften it. Then, on the bridge of the nose, hinges or in the crook of the temples, carefully tuck inwards until comfortable to fit.

Find a professional optical shop for a comprehensive repair, it is best not to adjust yourself, in case of desoldering, there is no way, people have professional tools;

If the glasses frame is crooked, you have to go to the optical store to correct it, and it is easy to damage the glasses frame if you manually correct it yourself.

How do I adjust the frames left and right? It may be that the snail is loose, you can twist it.

The solution to crooked temples is as follows:

1. Go to the optical store to adjust

Professional optical shop should tighten each screw on the frame before adjusting the adjustment, before you can start to adjust, otherwise it is impossible to adjust in place, the adjustment should be adjusted first, then the temple, and finally the nose pad, the glasses should be adjusted to let you wear, and then look at the curvature and length of the temples behind your ears, it is advisable to lower your head and gently shake the glasses not to slide down, and then fine-tune according to your overall wearing situation.

2. Fix it yourself

If you are too lazy to go to the optical store to make adjustments, and the glasses frame is not to the point where you need to replace it, you can repair and fine-tune it yourself. In the case of sheet glasses, then the easy way is to blow them on them with an electric hair dryer and then correct the shape. If the metal glasses frame is crooked, you can use nylon jaw chain pliers to adjust, and the attention channel should be light, otherwise it is easy to damage the glasses.

When using a hair dryer for heating, it is recommended to move the hair dryer, and it is recommended to pass the water once before the lenses are equipped to prevent the lenses from overheating. The outer opening angle of the metal frame is too large, press one hand at the junction of the mirror and the frame, and adjust it with the other hand. If you use pliers, adjust the pliers inward to clip less.

If the opening angle is too small, adjust it in the opposite direction, and if you use pliers, adjust the pliers outward to clamp more. When wearing loosely, hold the temple part and adjust it inward, so that the temple is more firmly adducted and hung on the ear. On the contrary, when it is tighter, the temple part is adjusted outward to make the glasses more comfortable to wear.

3. You can replace your glasses with new ones

If the glasses frame is seriously deformed, the deformation angle is very large, and the adjustment process may break the need for welding, etc., if the glasses are not expensive, buy a new one directly.

Professional optical shop should tighten each screw on the frame before adjusting the adjustment, before you can start to adjust, otherwise it is impossible to adjust in place, the adjustment should be adjusted first, then the temple, and finally the nose pad, the glasses should be adjusted to let you wear, and then look at the curvature and length of the temples behind your ears, it is advisable to lower your head and gently shake the glasses not to slide down, and then fine-tune according to your overall wearing situation.

The glasses crooked their own adjustment method:

1. The adjustment method of the nose pad height is incorrect.

Hold the glasses in place with your hands, clamp the bracket of the nose pad with forceps, and lift the forceps up or down to make sure the nose pad is at the right height until it is in the correct position on the face.

2. Adjustment method of asymmetrical nose pads.

Pinch the frame with your hands, pinch the leaves of the nose pad with your fingers or forceps, and twist forward, backward and backward so that the nose pad leaves on both sides are level and symmetrical.

3. The adjustment method of the angle of the temple.

Pinch the temple and frame with your hand and twist the angle of the temple with your other hand, outward if the angle is too large or inward if it is too small.

4. Temple bending adjustment method.

Find the bent position first, turn the hair dryer to the heated position, then blow on the curved part of the temples, then press your thumb against the temples and slowly adjust the curvature of the temples to straighten it.