Can I fix my glasses if they sit crooked, and what should I do if my glasses are bent?

1. Go to the optical store to adjust.

Professional optical shop should tighten each screw on the frame before adjusting the adjustment, before you can start to adjust, otherwise it is impossible to adjust in place, the adjustment should be adjusted first, then the temple, and finally the nose pad, the glasses should be adjusted to let you wear, and then look at the curvature and length of the temples behind your ears, it is advisable to lower your head and gently shake the glasses not to slide down, and then fine-tune according to your overall wearing situation.

2. Fix it yourself.

If you are too lazy to go to the optical store to make adjustments, and the glasses frame is not to the point where you need to replace it, you can repair and fine-tune it yourself. In the case of sheet glasses, then the easy way is to blow them on them with an electric hair dryer and then correct the shape. If the metal glasses frame is crooked, you can use nylon jaw chain pliers to adjust, and the attention channel should be light, otherwise it is easy to damage the glasses.

When using a hair dryer for heating, it is recommended to move the hair dryer, and it is recommended to pass the water once before the lenses are equipped to prevent the lenses from overheating. The outer opening angle of the metal frame is too large, press one hand at the junction of the mirror and the frame, and adjust it with the other hand. If you use pliers, adjust the pliers inward to clip less.

If the opening angle is too small, adjust it in the opposite direction, and if you use pliers, adjust the pliers outward to clamp more. When wearing loosely, hold the temple part and adjust it inward, so that the temple is more firmly adducted and hung on the ear. On the contrary, when it is tighter, the temple part is adjusted outward to make the glasses more comfortable to wear.

3. You can replace your glasses with new ones.

If the glasses frame is seriously deformed, the deformation angle is very large, and the adjustment process may break the need for welding, etc., if the glasses are not expensive, buy a new one directly.

It can be repaired, and the heating makes it soft and then correct, but the strength requirement is just right.

One of the best ways to bend the temples is to repair them directly, and if they don't work well, then replace them with a new frame.

Glasses are indispensable for some myopic people, if there is a lack of such glasses in life, it will definitely produce a very inconvenient phenomenon in their own lives, so we must take good care of our glasses frames.

If you find that your glasses are bent, you must ask a professional to repair it for you, and after the repair, you have to see if you are comfortable, if it is uncomfortable, it means that there is no need to repair the glasses frame.

In this case, it is necessary to replace the spectacle frames well, and choose the one that suits you best and is comfortable to wear, which is the best for yourself.

Be sure to pay attention to this aspect of the problem, if your glasses frame is bent and deformed and has not been replaced in time, it will also have a certain impact on your eyesight.

The method of adjusting the bending point of the temples is to take a cup of water and pour boiling water into the plastic and plate frames, and then insert the temples into the bend and pinch the ends of the bend with your hands to adjust. The metal frame can be adjusted by pinching the ends of the temple bend directly.

Many glasses are not easy to be white after they are finished now, and it is also possible that you use shape memory alloy in this glasses arm, and you can break it to the right angle when it is heated. It's okay when it's cool.

You can go to the place where you wear glasses to change your glasses, your legs are fine, you can change this, it's much cheaper than you change your glasses, you can choose two legs again, and then you can change them.

Bend to find an optical shop for maintenance, if it is a local glasses, go to the local to find the relevant staff to maintain, if not in the local match, you can also find a local after-sales service store to debug and debug for you.

Find a plier to give it a little break. Let it be corrected, it really can't be corrected, just go to the optical store to find someone to help repair it, it is generally free, and the worst thing is to change the frame!

If you wear glasses for a long time, more than several years, and the temples are bent, then it is recommended to go to the place where you bought the glasses at that time to replace the temples.

You can find someone who repairs your glasses, and then smash your eyes and buy a new one, or you can change the temples for at least 200 more.

It is recommended to go to the optical store to find a professional master to help adjust, and it is not recommended to adjust it yourself. A professional master will not only adjust your temples.

What should I do if my temples are crooked? If it is plastic, it is recommended to change the frame of glasses, which is also very cheap.

If the temples are bent, you can go to the optical store to break them back, and the optical store can adjust them for free.

When the temples are bent, you can blow them with a hair dryer and bend them back.

Possibility that the glasses are crooked:

1. A small amount of deformation of the frame, just break the deformed place directly.

2. The metal part of the frame is broken.

This is because the original frame is not firmly welded to cause problems, repair can be repaired, the need for a special welding machine.

But specialized equipment and professionals are needed:

Step 1: The laser welding machine first connects the argon pipe, then turns on the machine, turns on the argon pipe switch, and adjusts the pressure gauge.

Step 2: Set the parameters on the welding machine according to the material of the glasses frame we are welding.

Step 3: The operator holds the glasses in one hand and the required welding parts in the other, and observes the focus through the microscope to move up and down, left and right, and then aligns the required welding parts to the position.

Step 4: Use the foot switch for continuous welding until the welding is completed, take it out to see the welding effect, if the welding effect is not perfect, we can carry out secondary welding reinforcement.

Can be repaired. Spectacle frames are an important part of glasses, mainly supporting spectacle lenses, and beautiful spectacle frames can also play an aesthetic role. The main materials are metal, plastic or resin, natural materials, etc.

According to the style, it can be divided into full frame, half frame, frameless and other types.

Glasses cleaning and maintenance method:

1. Use ultrasonic cleaning to remove the dirt inside by vibration, which is generally available in optical stores, which is basically free.

2. When the slot of the lens card of the full-frame spectacle frame is dirty, you can unscrew the screws by yourself, take off the lens and wipe it clean with a paper towel.

3. If the screws are loose, please take them to the optical store in time to tighten them, otherwise the lenses will easily fall on the ground and break. Don't handle it casually.

4. Cosmetics or cosmetic agents and other cosmetics with chemical ingredients are easy to fade the frame, please wipe them clean with a special cloth or paper for glasses.

5. Most of the glasses are gently folded from the left side of the temple, if you are forced to fold from the right side first, it will cause the frame itself to be unbalanced and skewed, resulting in discomfort after you wear it.

6. In order to play the correct function of the glasses, the optical center of the lens should be made in the right position for your eyes.

7. Take the glasses with one hand, which is easy to deform the frame. If the frame is deformed, you should find a local optician to adjust the angle, and do not adjust it yourself, so as not to break the lens and damage the frame.

If you want to understand the process and conditions of opening an optical store, you can click [How to open an optical store by yourself and be the owner].

To open a glasses franchise store, you must choose a strong brand, so that the franchise can be guaranteed, so that entrepreneurs can rest assured, and the success rate of opening a store will be high.

Glasses can generally be repaired if they sit crookedly, but it is not recommended to repair them yourself, you can go to the optical store to repair them, and you have to take the glasses to the optical store to see them to judge. Depending on the damage to your glasses, you may need to go to the hospital's ophthalmology department or optician's shop to have your frames trimmed or frames replaced. If not trimmed or replaced, it will affect the refraction of the eye, which will cause an increase in the power of the eye and cause eye fatigue.

Happen. Nowadays, many people need to wear myopia glasses due to improper use of their eyes.

Corrective. However, if the glasses are not properly maintained in an orderly daily manner, or if you are not careful, the glasses frame will be crooked. Wearing crooked spectacle frames has serious consequences, not only making the eyes uncomfortable for a long time, but also aggravating myopia.

So what to do if the glasses frame is crooked? You can go to the optical store to adjust or repair it yourself, and you should also pay attention to the maintenance of glasses every day, so let's take a look at the common glasses frame adjustment methods and the daily maintenance of glasses.

What is the effect of the glasses frame being crooked.

influence

If the frames are crooked, it affects the interpupillary distance of the fit.

The distance or the angle of the lens will not play a role in protecting vision, on the contrary, myopia may be aggravated; The other is that after a long time, the eyes will be very uncomfortable, and it will always feel out of focus. There may be a number of reasons why the frames are crooked:

The horizontal tilt of the spectacle frames, the inconsistency of the left and right heights, and the inconsistency of the height of the left and right temples; The nose bridge of the spectacle frame is deformed and tilted; The height of the wearer's ears is inconsistent.

Hazards: Long-term wearing of this type of frame will cause dizziness due to the inability to see through the optical center of the lens, which will cause a certain prismatic effect.

Fatigue is easily observed. Doing so for a long time may result in a shift in the center point of the eye fixation.

The horizontal shift of the spectacle frame is mostly due to the angle of the temple.

inconsistencies, especially large amplitude shifts; The left and right positions of the nose pads are inconsistent; The length of the left and right temple bends is inconsistent; There is a large difference in the width of the left and right faces of the wearer, or the anterior and posterior positions of the left and right ears are different.

Hazards: Long-term wearing of this type of frame will cause dizziness, blurred vision and other phenomena due to the inconsistency between the optical center and the peripheral power of the lens and the prism effect, and in serious cases, it will cause the center of the main viewpoint to deviate.

The height of the frame of the glasses is not suitable for the nose pad, and the position does not match the bridge of the wearer's nose; The length of the temple bend is not suitable; The selected frame is too large or too small.

Hazards: Long-term wearing of this type of frame will cause blurred vision, dizziness, eye swelling and other phenomena due to not seeing through the center of the lens.

Loose or tight temples are associated with the enlargement or shrinkage of the temples of the spectacle frames, the oversize or small frame surface of the spectacle frames, and the deformation of the nose bridge of the spectacle frames.

As long as it doesn't break, it can be repaired. True love is hard to find, on the road of love, everyone wants to meet a right person, after all, after getting along, they find that both parties are not suitable, this kind of tasteless food is a pity to abandon the taste is not comfortable, below, let's take a look at what the most accurate feeling is when you meet the right person.

What are the most accurate feelings about meeting the right person?

1. Always want to be with each other.

If you like someone, you will always want to be close to each other, and when you meet the right person, you will not only want to be close, but also want to be with each other all the time.

When you meet the right person, you will always want to be with each other, want to stick to each other, and want to be the oxygen that the other party can't quit, but everyone has their own job and needs to have their own independent space, and the other party can't always be by your side, so when you go out on your stomach, you will also have the idea of "how good it would be if the other party was around".

Life is only 30,000 days, and the probability of a person meeting the right person in his life is very low, so if you have these feelings, don't doubt that the other person is someone who can spend your life with you.

2. Live your life.

Being the right person will allow you to live your life and have the courage to show your true side, even if there are many shortcomings in this side.

In ordinary life, we will always hide our shortcomings and show our strengths, and when in front of the right person, you will involuntarily take off your usual strong disguise and show your true self, even if you have any shortcomings, you will not hide it, because you know that the other party is the right person, so you can live your life with confidence.

3. Restlessness.

If you are attracted to a person, your heart will be as unstable as a deer.

When you get along with the right person, you will always be restless, even your eyes will dodge, deliberately avoid looking at each other, and when the other party looks at you, you will be embarrassed to look elsewhere. And when the other party finds out that you have contact with other members of the opposite sex, they will always be jealous, and then make some unusual moves. For example, not talking to you, treating you with a cold face, being depressed alone, etc., these are the feelings that only people will have when they meet the right person.

4. Very nervous.

No matter how outgoing you are, you can get very nervous when you meet someone you like.

When you meet the right person, you will always be unable to control your mentality and will be very nervous. Of course, this is not only you, but also the other party, in the process of getting along, the other party will also make a lot of behavior unnatural because of nervousness, and these actions are actually actions that only appear when you meet the right person.

So, if when two people get along, both of them become very nervous, and there is a big contrast between what they usually do, it means that you are both the right person in your hearts.

5. Affection.

Two people who really love each other will have surprisingly consistent ideas.

When you meet the right person, the other person will always guess what you think, and you can involuntarily know what the other person is thinking. In the process of getting along, often without a lot of words, both parties can know what the other party wants, perhaps this is the so-called love agreement.

How to adjust the height of the nose pads.

1. First hold the glasses with one hand and hold the nose pad holder with pliers with the other hand.

2. Then lift the pliers up and move the nose pad down until you reach the correct position of the glasses on the face.

2. Asymmetrical adjustment method of nose pads.

1. First, hold the glasses frame with one hand and pinch the nose pad leaf with pliers with the other hand.

2. Then twist in the direction of the correct nose pad position so that the leaf surface of the nose pad is in contact with the two planes of the nose side.

3. How to adjust the opening angle of the temple.

1. First of all, pinch the welding part of the pile head with one hand or use pliers to make auxiliary pliers at the pile head, and fix it.

2. Hold the pliers with the other hand and twist outward to increase the opening angle, and twist inward to reduce the opening angle.

Fourth, the temple bending (bending point length) adjustment method.

1. First of all, use a heater (hair dryer) to heat the plastic part of the glasses; Straighten the bend of the temples.

2. Next, put the glasses on your face and find out where the bend is.

3. Then use a heater (hair dryer) to heat the plastic part of the temple, and use the thumb as the bending support, and the bending arc is basically the same as the shape of the ear root.

5. Mirror (frame) angle adjustment method.

1. First of all, cover the two frames with your thumb and index finger respectively.

2. Then bend the mirror inward or outward with both hands at the same time.

I hope that after reading it, you can understand how to operate and adjust when you encounter such problems in the future. However, for some glasses frames that are more expensive and difficult to adjust, Kaier recommends going to the optical store to find a professional to adjust them to prevent them from being damaged by overexerting too much force.

Having said all this, of course, it is not necessarily comprehensive. If you have any questions, you can directly keep it private.