Is it good to have a gate with a height of 2700 and a width of 2900?

On our side, I think the gate is a bit narrow at 2.9 meters.

Normally, it will be three meters, five to four meters.

It would be nice if the height could be higher.

The main consideration is the convenience of entering the car in the future.

It still depends on the specific situation of your own home.

From the perspective of Feng Shui, it's hard to say whether it's good or not. This depends on the entire wall area, how big it is, and whether there is anything around the perimeter of the outer wall. The size of the meter height and meter width, in addition to coordinating with the area of the entire wall, the light brought to the house is also a factor to consider, and the location of the door is open in **, which needs to be considered.

As for those aspects of Feng Shui, different masters have different sayings.

In Feng Shui, the size of the door is auspicious, and there is a saying that it is calculated according to the "door light ruler".

The door is marked with "eight inches", which are "wealth, illness, separation, righteousness, official, robbery, harm, and capital", and each inch is centimeters. Among them, "wealth, righteousness, official, and capital" are auspicious, as long as the size is in these four words.

8 feet 8 inches (cm) is "auspicious";

1 zhang 1 inch (cm) is "wealth";

It's better to buy a Luban ruler to measure!

This door is too high, the ratio of width to height is almost one to one, it is too positive, and it is generally recommended to use a rectangle.

The width of the gate is 1800 (see the light size) is not in the Luban ruler auspicious number, and the height of 2700 (see the light size) is not in the Luban ruler auspicious number.

The width and height of the gate, if you are particular about it, go and buy a Luban ruler with scales, auspicious and bad, and you will understand it at a glance.

But the position of the door facing is much more important than the size of the door.

Summary. Kiss. Glad to serve you Generally, the width of the door should be between 2500mm-2700mm and the height should be between 2100mm-2400mm.

Such specifications can meet the needs of common residential entrances and exits, and at the same time, it will not consume too much space and achieve the best effect of space utilization.

Kiss. We are glad to serve you Generally, the width of the door should be between 2500mm-2700mm, and the height should be between 2100mm-2400mm. Such specifications can meet the needs of common residential entrances and exits, and at the same time, they will not consume too much space and achieve the best brightness effect of space utilization.

Then my size 2700 and my height 2800 can not.

Yes, as long as you have enough space to install your door, you can install a 2800 tall door. The exact installation details will vary depending on the specific type of home, but in general, they can be ridged to fit on a 2700 wide door.

The standard size of the entrance door is meters, and in general, the size of the entrance door is meters. Another kind of entrance door is the mother and son door, and the size of this door is generally meters. Depending on the type of dwelling, the size of the entrance door will also be different.

If it is the entrance door of the villa, the width is basically 2 meters to 3 meters, the height is not limited, the width and size are larger than the common commercial houses, and the overall atmosphere is more beautiful. At present, the entrance door of the villa has the following two most common sizes, meters and meters. Generally, the entrance door of a residential house usually adopts a mother-in-law door, with a size of 2 meters.

The door to the door of the commercial house is also the use of the mother and son door, the standard size of the pin file is high meters, 1m to the width of the single door, and the width is more than the double door.

The width and height of the first reply are reversed. You take a look.

The width and height of the door are relatively arbitrary, and the size of the door is generally planned according to the overall design of the exterior wall.

Generally speaking, the standard door and window sizes are as follows:

1. The interior door is generally 900mm*2200mm.

2. If possible, it can be 1000mm*2200mm.

3. The indoor guard door is generally 800mm*2200mm.

4. Double door 1300mm*2200mm or 1500mm*2200mm.

5. If there is a door head, such as a European-style door head, then the high source early is generally about 2700mm.

6. The opening size of the ordinary door is 1000*2100mm. The size of ordinary windows is generally 1800*2300 and 5600*600mm.

7. The size of the door and window is generally 2400*2400mm or 2200*2400mm. In addition, there are pants cracking 3300*3000mm and 1500*2400mm sizes.

What type of door to buy: 1. The height is 2050mm and 970mm, and the width is 860mm and 960mm. 2. After combination, it can be *950.

The 2050mm mentioned here refers to the door frame with a total height of meters, if the height of the door opening at home is 2070mm, you can buy a 2050mm size of the security door, because he needs to reserve about 20mm space, so that it will be more convenient when installing. 3. The anti-theft door is generally divided into two kinds: open outside and inside, and generally we identify the direction of the door is to stare outside the room. 4. The direction is divided into:

Outer left open, outer right open, inner left open, inner right open.

The number of millimeters is 3380 mm.

2600 mm meters.

Summary. Hello dear, the door height 2100 width 1800 thickness 270 is how many flat calculation is: 2100 * 1800 * 270.

Can you hurry up. Hello dear, the door height 2100 width 1800 thickness 270 is how many flat calculation is: 2100 * 1800 * 270.

What is the result.

The result is 1,020,600,000.

I mean how many square <> the result is

The question you just posted didn't say whether height and width are centimeters or meters, if they are centimeters.

It's rice. If it's rice, it's 1,020,600,000.

This object is not squared, and the square refers to the unit without thickness, which is to calculate the cube.

The square is actually the product of the multiplication of two numbers, and the cube is the product of the multiplication of three numbers, the difference between the square and the cube is very large, one is mainly used to calculate the area, the other is used to calculate the volume, the square represents the area unit, and the vertical collapse block represents the unit of the body mass grinding Hu.