win10 how to divide the handicap

Recently, I have received many netizens who ask that after upgrading win10, I don't know what the method of partitioning the hard disk of the win10 system is. Today on this issue,Summarize a win10 system hard disk partition method,If you are interested, you may wish to learn about it。

Win10 system hard disk partition method:

Prepare a USB flash drive of more than 1GB, use the Cloud Knight USB flash drive installation master to make the USB flash drive into a boot disk, insert it into the host, enter the BIOS settings, set the USB flash drive as the first boot item, and after completion, save and exit, and restart the computer to enter the PE system.

Double-click the "Diskgenius Partition Tool" on the desktop, run the partition tool, and open as follows:

Notes:1Check the size of the hard disk of the desired partition to avoid mistakenly dividing other hard drives.

2.Look at the location of the hard drive you need to partition and see the brand capacity.

3.Select the hard disk you want to partition (the disk shown in the blank area on the left) and click with the mouse. Then click the "Quick Partition" button and the interface is as follows:

Select the number of partitions you need or manually select the number of hard disk partitions, and "Rebuild Boot Record" remains unchanged, the main partition of the hard disk remains unchanged by default, click the main partition capacity area with the mouse, and modify the capacity of the C disk where the system is located (it is recommended that the XP system is greater than 20G, and the Windows 7 system is greater than 30G). Modify the capacity of the number of partitions. and click on the blank space of the capacity of other partitions to automatically adjust the full capacity.

After setting the partition capacity, click OK. Then the hard drive is automatically formatted, and the partition is done.

Well,The tutorial on win10 system hard disk partition is all over here,You may think that the **tutorial is a bit too much,But there are no few steps in actual operation,I hope you can like it。

Disk Partitioning Method:

Step 1Right-click on This PC, select Manage, and then select Disk Management in the left list of the Computer Management window. In Windows 10, you can also right-click on the start menu and directly select the "Disk Management" function.

<> step 2In the partition list, right-click on the part you want to repartition, select "Compress Volume", and the system will give you the available compressed capacity after analysis.

<> step 3Enter the size of the capacity you want to split.

Note that if it is a system disk, it should have at least 50GB of capacity. After determining the capacity, click "Compress", and when you are done, you will see an unpartitioned free space added to the partition list.

It should be noted here that because the Windows system is calculated according to 1024MB=1GB, and the hard disk manufacturers are converted according to 1000MB=1GB, if you directly input 10000MB, you will not get a 100GB partition.

Step 4Create a simple volume.

Repartitioning into one or more partitions is fine. Just right-click on the space, select "New Simple Volume", and then press the prompt "Next".

Step 5Allocate capacity to other partitions.

For unallocated space, you can also choose to assign it to any of the existing partitions, right-click on the selected partition, select "Extend Volume", and then follow the prompts.

How to partition win10 hard disk:

1. Right-click "My Computer" and select "Manage".

How to partition win10 hard disk:How to partition hard disk in win10.

2. In the pop-up window, select "Disk Management".

How to partition win10 hard disk:How to partition hard disk in win10.

3. You can see the disk at the bottom right of the window, select the disk you want to partition, and right-click.

How to partition win10 hard disk:How to partition hard disk in win10.

4. Then select Compact Volume.

How to partition win10 hard disk:How to partition hard disk in win10.

5. The system will calculate that the space can be compressed, enter the space you need to compress, and then click: compress.

How to partition win10 hard disk:How to partition hard disk in win10.

6. After the compression is completed, you will see an unallocated partition, right-click and select "New Simple Volume".

How to partition win10 hard disk:How to partition hard disk in win10.

7. Click "Next".

How to partition win10 hard disk:How to partition hard disk in win10.

8. Click "Next" again.

How to partition win10 hard disk:How to partition hard disk in win10.

9. Select the format of the disk for the newly created simple volume, generally select "NTFS".

Click "Next".

How to partition win10 hard disk:How to partition hard disk in win10.

10. You can see the new partition on my computer.

How to partition win10 hard disk:How to partition hard disk in win10.

11. Click Done.

You can divide the system disk when you install it, and you can divide it into about 100g.

The hard disk partition is not related to the system. Generally, the hard disk is partitioned first. Then go and install the operating system. This is true whether it is XP or Win7 or Win10.

It is recommended that you use professional props to play sideways, and do not try it yourself.

Partitioning software can be installed.

Recently, many friends have newly purchased a laptop with a pre-installed win10 system, and found that the disk of the laptop was not divided, so we have sorted out two methods of dividing the laptop disk, so that everyone can easily divide the disk, if you need the acer, you can come to view the method sorted out for everyone.

Method 1

Presswin+rInputand press the Enter key to open the Disk Management tool;

Right-click on the large partition you want to split and select "Compress Volume";

Set the amount of space you want to compress in the pop-up window (i.e., how much space you want to split), and then click Compress to compress the existing partition and get an unallocated space.

Right-click on the unallocated space you just generated, select New Simple Volume, and follow the prompts to create a new partition to complete the task of splitting a hard disk partition.

Method 2

Open Aomei Partition Assistant, right-click the partition you want to split (such as Partition C) in the main interface, and select "Split Partition";

In the pop-up window, click the hollow circle in the middle of the partition and drag it left and right to freely adjust the size of the new partition after splitting, and you can also check the "Allow partition alignment to optimize SSD and HDD hard disks" option to optimize its read and write performance, and click "OK" after setting;

Go back to the main interface, click the "Submit" button in the upper left corner to take a snapshot of the upcoming task, and click "Execute" to start splitting the hard disk partition.

The above is the method of how to divide the handicap brought to you in win10, I hope it can help you.

1. Turn on the computer, then right-click the computer on the desktop, and select Manage in the pop-up dialog box.

2. In Computer Management, select Disk Management.

3. Right-click the disk you want to compress, and select Compress Volume in the pop-up list option.

4. In the pop-up dialog box, enter the size of the disk you want to partition as required, and click Compress.

5. After compression, an "Unallocated" disk space will appear on the Disk Management page, right-click the unallocated space, and select "New Simple Volume".

6. In the pop-up dialog box, fill in as needed. When you're done, click Next.

7. Assign the drive letter and path, write the disk symbol, and click "Next".

8. In the pop-up page, use the following settings: "File System" - "NTFS", "Allocation Unit Size" - "Default", "Volume Label" - "New Volume" to format the partition, then check "Perform Quick Format", and click "Next".

9. After waiting for a few seconds, the formatting partition is completed, and finally click "Finish", and the disk partition can be completed.

Win10 Dividing Method:Tools Raw Materials: Demo Computer: dell Burn 7000, System: Win10 Home Edition.

1. After turning on the computer and entering the system, right-click on the management option on the computer.

2. Click on it and select Disk Management on the left side.

option to enter.

3. After clicking enter, select the disk with a large remaining space in the disk, and right-click the option to compress the volume.

4. After clicking, enter the size of the compression space in the compression volume interface, and click compress.

5. After compression, you can see an unallocated disk, right-click the option to create a new simple volume.

6. After clicking, follow the prompts to select the next option.

7. Click to the end and select the option to complete below.

8. Click Finish to create a new disk to use. You can divide a disk into multiple disks.

The win10 dividing method is as follows:

Preparation materials: ASUS Tianxuan 2, Windows 10

1. Click Manage: After opening the Windows 10 system, right-click on this computer option, and select the management option in the list.

2. Select Compress Volume: Select the Disk Management option in the list on the left, find and right-click the original partition to be split in the window on the right, and select the Compress Volume option.

3. Click Compress: Enter the size of the area you want to split out (in MB, 1GB is equal to 1024MB), click Compress to start splitting the disk.

4. Select Create a new simple volume: After completion, an unallocated partition will appear in the list, right-click the partition and select New Simple Volume.

<>6. Select Format Partition: Click Next to select Format Partition, select NTFS for file system, and there is no need to change other options without special needs. Click Next again, and when you're done, you can find the new partition in the file manager.

You can partition it through the system's built-in tools.

Prompt "Volume is being queried for free compressed space, please wait...."Wait patiently for a few moments and then the amount of compressed space available appears. For example, if you compress 300 GB, calculate 300 GB * 1024 = 307200, and add 10 MB or 20 MB on top of this to prevent the partition table from taking up space and separating it unsightly.

Click the unallocated space that appears after compression, right-click and select "New Simple Volume".

If you want to divide the unallocated space into multiple zones, write the required capacity of the current partition.

The drive letter here defaults to E (because the D drive is already occupied by the optical drive.) Friends with obsessive-compulsive disorder, you can go back to the disk management page and right-click on the optical drive, choose to change the drive letter and path, change d to the letter after it, leave the position of d, and then change the E drive to D disk here).

Enter the partition name in the "Volume label" field and select Next (you can also right-click in [This Computer] to rename it later).

Tap Done, wait for a while, and you're done.