How can I wash off the yellowing of the water stained on the bed sheets on the radiator?

Updated on home 2024-06-25
20 answers
  1. Anonymous users2024-02-12

    Radiator. At this time, you can soak it in white vinegar for about 30 minutes, and then wash it with laundry detergent.

  2. Anonymous users2024-02-11

    If the water on the radiator stains the sheets yellow, and you want to wash them off, it is very difficult, you can soak them in vinegar and baking soda for a while, and then poke them in the west, maybe you can wash off some, but it really doesn't work, if the sheets are light colored, or white, they will fall off with eight four.

  3. Anonymous users2024-02-10

    Generally, 1 part of ammonia with a concentration of 10% and 10 parts of water are mixed to soak in a dilute ammonia aqueous solution, and then use a cotton ball to dip this solution and rub it until it is clean. If there is still residue after washing, it should be wiped with a hydrogen peroxide solution with a concentration of 3%, and then rinsed with water until it is clean.

  4. Anonymous users2024-02-09

    Yellowing is rust, stained to the cloth cleaning is more difficult, laundry detergent is definitely not good, acid can remove rust, and rust reaction, but to the concentration of high to see the effect, pay attention not to soak in water when cleaning, soaking in water will reduce the acid concentration, you can try to use vinegar.

  5. Anonymous users2024-02-08

    You can add some baking soda and vinegar or buy some hair four or bleach.

  6. Anonymous users2024-02-07

    The sheets on them are yellow, and if you want to wash them off, you can put some baking soda or bleach in them.

  7. Anonymous users2024-02-06

    There is a lot of water on this top, you can try to soak it in some vinegar, or laundry detergent or something.

  8. Anonymous users2024-02-05

    You can buy that kind of lottery powder, mix it with boiling water, wash it, and then put it in to soak for a while before washing.

  9. Anonymous users2024-02-04

    The yellow that you stained on the sheets is rust, so you should wash it off with something acidic.

  10. Anonymous users2024-02-03

    If this is just dyed, go wash it quickly, it is possible that he can't wash it off after a long time, put a little alkali.

  11. Anonymous users2024-02-02

    You can try pasteurizing solution, and general traces can be removed.

  12. Anonymous users2024-02-01

    How can the water on the pole piece be polluted to the yellowing of the deposit receipt? You can find a bleaching agent related to this, especially the kind used by living organisms.

  13. Anonymous users2024-01-31

    This is difficult to wash off, because this water contains a lot of minerals.

  14. Anonymous users2024-01-30

    Water on the radiator stains the sheets and turns yellow how can I wash them off who stains the sheets on the radiator and turns yellow can be washed off by soaking in the bus.

  15. Anonymous users2024-01-29

    : Prepare ingredients: baking soda, white vinegar, laundry detergent, water. 1. Add an appropriate amount of baking soda to a basin. 2. Then add a few drops of white vinegar. Small.

  16. Anonymous users2024-01-28

    1. First of all, the surface of the yellowing radiator needs to be cleaned. Although radiators are only used for one winter, surface cleaning is also very important. The steel pillar radiator is easy to clean, and the surface can be as bright as new with just a wipe of a regular towel.

    The space between the two adjacent columns is small, and you can use a chemical fiber "feather duster" to wipe the heating gap, and the duster can also ensure that the dust does not fly randomly after the duster is wet, and the heating can be cleaned quickly. The gap of the copper-aluminum composite radiator is small, and you can use a discarded ** wire or other thin rope with a little hardness, tie a wet rag at one end, and pass through the hole of the radiator at the other end. Slowly pull the rag and repeat it a few times to clean the radiator.

    2. Secondly, the radiator filter needs to be cleaned. Before cleaning, you can close the inlet and return valves of the heater, and then use a tool to remove the filter, and then replace it after brushing the filter with a brush.

    3. Finally, the inside of the radiator needs to be cleaned regularly. Be careful not to forget to clean the inside of the radiator. At present, it is difficult for users to clean up the heating room alone, so they can ask a professional radiator cleaning company to operate, saving time and worry.

  17. Anonymous users2024-01-27

    This can't be cleaned, and most radiators are painted. Similar to car paint. Over time, the white will turn yellow.

  18. Anonymous users2024-01-26

    If the water heating radiator is in operation for a long time, impurities and dirt will accumulate inside, which will hinder the radiator from dissipating heat well and seriously affect the indoor temperature. Therefore, it is necessary to clean the inside of the water heating radiator to keep the radiator running efficiently and prolong the service life of the radiator. Let me introduce you to the small details of radiator cleaning.

    First of all, you need to close all the inlet and return valves of the water heating radiator, and gently unscrew the plug of the water heating radiator with a wrench. It should be noted here that a basin should be placed under the radiator corresponding to the plug of the water radiator to connect the water flowing out of the flushing radiator (it is best to have another basin to replace the basin that is almost full).

    Then, open the temperature control valve of one of the water heating radiators (can be opened and closed, the flushing effect is better) and flush the radiator until the water flowing out is clearer, close the valve, open another temperature control valve and continue to flush, until the water flowing out is also clear, close the temperature control valve, and tighten the plug.

    Then open the valve of the water heating radiator inlet and return water, and exhaust it; For the water heating radiator that goes in and out, the valve is connected with the radiator for flushing; For the steel bathroom radiator in the bathroom, you can unscrew the exhaust valve on the top of the radiator, open the valve and flush it directly, so that the dirty water will flow directly from the bathroom floor drain.

  19. Anonymous users2024-01-25

    How to clean the yellowing of the heating surface, and what can be used to wipe off the whitening?

  20. Anonymous users2024-01-24

    Summary. Hello, I am glad to answer for you, how to clean the radiator when it is yellow, because the radiator uses hard water, calcium and magnesium ions are the majority. Most of the inside is carbonate and other substances, you can connect a small water pump externally, and then add dilute hydrochloric acid or oxalic acid solution to the radiator, and then add a small amount of hot water (the temperature can speed up the dissolution of carbonate substances), so that the small water pump works to accelerate the circulation of dilute hydrochloric acid or oxalic acid inside the radiator.

    Hello, I am glad to answer for you, how to clean the radiator when it is yellow, because the radiator uses hard water, calcium and magnesium ions are the majority. Most of the inside is carbonate and other substances, you can connect a small water pump externally, and then add dilute hydrochloric acid or oxalic acid solution to the radiator, and then add a small amount of hot water (the temperature can speed up the dissolution of carbonate substances), so that the small water pump works to accelerate the circulation of dilute hydrochloric acid or oxalic acid inside the radiator.

    If you don't have a small water pump, just put in dilute hydrochloric acid or oxalic acid and let it slowly dissolve inside the radiator. The carbonate substance is very hard and will take a long time to dissolve, and after a while the solution inside the radiator should be shaken. It is possible to observe whether the excluded substances have dissolved carbonate substances.

    If you don't have a small water pump, just put in dilute hydrochloric acid or oxalic acid and let it slowly dissolve inside the radiator. The carbonate substance is very hard and will take a long time to dissolve, and after a while the solution inside the radiator should be shaken. It is possible to observe whether the excluded substances have dissolved carbonate substances.

Related questions
11 answers2024-06-25

The installation of kitchen radiators, in terms of material, the kitchen is suitable for choosing steel or copper-aluminum composite radiators, the choice of these two types is for heating considerations, they have a large amount of heat dissipation, rapid heating, open 15 minutes before entering, and when they enter, it is already warm like spring, which will not make people wait too long and avoid the pain of freezing; Second, because the kitchen is full of smoke and dust, the items placed in it are easy to accumulate dust, and it will be difficult to clean up if it is too late to clean for a long time, which requires the radiator installed in it to have a smooth surface and easy to clean and take care of. Among the many product types, steel and copper-aluminum composite meet the above requirements and are deeply loved by users.

17 answers2024-06-25

It is possible that the reason for the small water pipe is that the water circulation is slow and the heating is not hot, the first group of heat is the front end of the water inlet and the second group of heat at the end will definitely be lower, you can change the pipe to a thicker point to accelerate the water flow and increase the heat.

8 answers2024-06-25

Close the return valve. Before cleaning, in order to ensure safety, be sure to turn off all the return valves, and then use a wrench to gently unscrew the plug on one side of the radiator by hand. Here is a warm reminder for everyone: >>>More

8 answers2024-06-25

Prepare a container that is packed, such as a bucket or tray, to prevent water from flowing into the pipes to the ground. Then find the location of the inlet and outlet valves, close them, open the water opening valve, and place the prepared poke or basin at the outlet to receive water. Finally, when the water is free of foam, the drain valve can be closed. >>>More

10 answers2024-06-25

1.Vera radiator, (Top 10 well-known brands, China's famous brands, Olympic Bird's Nest special radiator, Beijing Oriental Vera Technology****). >>>More