Xiaomi MIU1 Why does it always show that the network connection is not available

Hello, what network do you use, is the mobile phone Mi-2 or Mi-1S? Don't worry just yet, try it:

1. You try to change other networks, such as changing the wireless before using the data, and changing the traffic before using the wireless.

2. Try to change to another SIM card or other wireless to see if you can access the Internet.

3. Xiaomi mobile phones come with similar security software running in the background, if you install other security software, it may cause conflicts, it is not recommended that you install third-party security software, installing these software may affect the normal use of the phone.

4. You click the mobile phone menu key - global search, enter the network assistant, click the traffic ranking, click the batch network control, check whether the options below the wifi and traffic are checked, if not, please check it.

5. You try to back up and clear the data, it may be that the data is causing interference.

Backup: Security Center - Backup - Create a backup and select all data for backup, which usually takes 3-5 minutes. Clear data:

In the shutdown state, first press and hold the volume up button, then press and hold the power button, wait until the white mi character appears on the boot, then release the power button, do not release the volume up button, until the volume up button is released after entering recovery. Go to Recovery >Chinese >> Clear Data >> Empty all data

6. You can also use a line brush brush machine to try, and the line brush is more thorough. It is recommended that you back up your computer before flashing.

bPlease flash the machine according to the flashing tutorial, flash the tutorial.

The sixth type is the line brush.

1. There are many reasons why Xiaomi mobile phones show that the network connection is not available, and there are four common reasons:

2) Network data is not turned on.

3) The SIM card is old or damaged.

4) Software-induced failures.

2. The solutions to the common causes are as follows:

02 The network data is not turned on, as follows:

Turn on your phone's mobile network and check if the mobile network is turned on.

If the SIM card is old or damaged, try a different card.

Back up mobile phone data (**book, SMS information, multi**data, etc.) to restore the factory settings of the mobile phone (eliminate whether the fault caused by the software), if the above methods have been tried, the problem still exists, it is recommended that you bring the purchase invoice to contact the mobile phone service center for testing.

When the network connection is not available on your Xiaomi phone, please check the network settings, there may be the following reasons.

1. It may be that the mobile phone does not open the data connection, and the solution is recommended: enter the settings and turn on the data clearing data connection;

2. It may be that the mobile phone is down and cannot connect to the data, Wu Zhengsu, the recommended solution: recharge the mobile phone and turn on the network;

What's going on with the Xiaomi phone network connection not working

1.Ensure that the mobile phone is not in arrears and that the current signal is good.

2.Check whether the data network identification in the upper right corner is normal, and the network above Hg and 4G G is relatively good;

3.Try to turn on or off the data or restart the phone, or try to change the SIM card temporarily.

4.Check whether the Internet access function of a single program has been disabled in the built-in network assistant of MIUI, or the upper limit of the current set ** traffic has been reached;

5.Whether other network management software has been installed, you can try to close or uninstall it;

6.Reset APN settings (System Settings - Dual SIM & Mobile Network--- click on the corresponding Internet SIM card ---Access Point Name (APN) - Reset), select the access point of "NET" to try;

7.Back up the data, clear the data without restoring the backup and try whether it is normal. If it is abnormal, you can go to the after-sales outlet for testing.

What should I do if the network connection is not available on the Xiaomi mobile phoneHello dear The mobile phone cannot connect to the data network or cannot go online after connecting, it is recommended that you:1Ensure that the mobile phone is not in arrears and that the current signal is good.

2.Check whether the data network identification in the upper right corner is normal, and the network above Hg and 4G G is relatively good; 3.Try to turn on or off the data or restart the phone, or try to change the SIM card temporarily. 4.

Check whether the Internet access function of a single program has been disabled in the built-in network assistant of MIUI, or the upper limit of the current set ** traffic has been reached; 5.Whether other network management software has been installed, you can try to close or uninstall it; 6.Reset APN settings (System Settings - Dual SIM & Mobile Network--- click on the corresponding Internet SIM card ---Access Point Name (APN) - Reset), select the access point of "NET" to try; 7.

Back up the data, clear the data without restoring the backup and try whether it is normal. If it is abnormal, you can go to the after-sales outlet for testing. Additional Notes:

Some areas support 4G but the signal is very poor, which can also cause the network speed to be too low. Hello, if I'm helpful to you, please give it a thumbs up, <>

Your praise is my greatest support, I wish you a happy life and all the best, thank you for kissing <>

The reasons why Xiaomi mobile phones are connected to wifi but can't access the Internet are: 1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet. 2. Router problems, the router may be overheated or damaged.

3. Broadband arrears may lead to inability to access the Internet. 4. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet. 5. There may be a problem with the mobile phone system, which may cause the connection to wifi but the Internet cannot be accessed.

Suggested solutions: 1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet and eliminate the problem of wifi itself. 2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

3. Contact broadband customer service to confirm whether there is any abnormality in the broadband, such as arrears, recharge the broadband, and then dial up the connection. 4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting. 5. If the above reasons are ruled out, it is likely to be a problem with the mobile phone system for a long time, it is recommended to restore the factory settings or flash the phone to see if it can solve the problem.

Xiaomi phones. The security software runs in the background. If you install other security software, it can cause conflicts.

If your system is not the latest version of your system, it is recommended that you turn on the network and try to update the system version. The new version of the system will add some new features and fix some problems in the old version.

If that doesn't work, I recommend you try backing up and erasing your data, as it can be disruptive. Backup: Security Center - Backup - Create a new backup to back up the data you need.

Data Cleanup: When power off, press and hold the volume up key and the power off key. When the power appears on the screen, release your hand and enter the recovery.

Loss and Respect Recovery "Chinese" Clear Data "Clear Data" Clear all data. You can also use the line brush machine to try, the line brush more thoroughly. It is recommended that you make a backup before swiping your card.

What should I do if my Xiaomi router is set up and can't access the Internet?

Cause. First, the broadband or cat problem.

If there is a problem with our broadband or the cat itself, such as the overdue payment of the broadband, the problem with the broadband line, or the failure of the cat, it will cause the router to be unable to use the Internet after setting.

Solution: We can not use the router, and then connect the network cable from the external network cable or cat (fiber optic cat or **cat) directly to the computer, and then the computer "broadband connection" dial-up Internet access, if the computer can not access the Internet at this time, please call the broadband service ** to call the maintenance worker to come to the door.

Cause. 2. The router is set up incorrectly.

1) The Internet access method is selected incorrectly.

If the type of broadband we choose is inconsistent with the type of broadband, it will cause the situation that we cannot access the Internet. The following is a brief introduction to the selection method.

Broadband PPPOE: If the broadband operator provides you with a broadband account number and broadband password after handling the broadband business, and when the router is not used, the computer needs to use the "broadband connection" (or similar dial-up program) to fill in the broadband account number and password for dial-up Internet access. If your broadband situation is consistent with the one described above, you should select the following options:

broadband PPPoE".

Dynamic IP Internet access: If you don't use a router, you can access the Internet as long as you connect a broadband network cable to your computer. Explain that your broadband type is:

2) Fill in the wrong information on the Internet.

When we fill in the Internet access parameters, if the input is incorrect, such as the Internet account and password are uncertain, or there are spaces when entering, the information filled in when the static IP Internet access is inconsistent with the information provided by the operator, etc., it will definitely lead to the inability to access the Internet. This is also the reason why 90% of users encounter the router and cannot connect to the Internet after it is set up.

Cause. 3. The router is not installed correctly.

Many users connect the external network cable or the network cable from the cat to the LAN port of the router, which is not right, and this situation will definitely cause the network to be unable to get on.

Correct installation method:

Cause. Fourth, the network cable fault or router quality.

For example, if an external network cable, the network cable from the cat to the router, or the network cable from the router to the computer is faulty or the quality is too poor, it will also cause the router to be unable to connect to the network. In addition, there is another problem that everyone is easy to ignore, that is, the quality of the router, although there are very few quality problems, but it should also be considered by us. I've encountered a quality problem with a newly bought router and can't set up Internet access.

Solution: Check the indicator light on the router and modem, under normal circumstances, as long as there is no problem with the network cable, the corresponding indicator will light up.

It should not be connected well, you see if the external network settings of the router are set correctly, and whether the external network can be connected to the Internet normally.