How to install countertops in custom cabinets? How to accept the installation of custom cabinets?

Custom cabinet installation countertops: Tape to accurately measure the length and overall width of the platform area to be installed, then consider whether to install a sink or install a sink and countertop separately according to the plan. The marble kitchen countertops prepared in advance are moved to the area where they are to be installed.

If there are stains or dirt on the artificial stone countertop, clean it.

Natural marble kitchen countertops are ready, so you can gradually remove old tables and sculls. Pay attention to this step: if the wooden cabinet on the table does not need to be replaced, the integrity of the cabinet should be guaranteed when the old table and water residue are removed.

Naturally, if the situation allows, we can gradually remove the old cabinet countertops and scum in a few days before installing a new artificial stone table, and remove the discarded goods.

Once the assembly area has been processed, the natural marble kitchen countertops can be assembled. It must be noted that in the installation step here, you do not need to use all the super glue. After the assembly, check the actual effect of the assembly to see if the assembly is suitable.

If the shape of the dining table is not a complete square or rectangle, it may need to be trimmed and optimized after installation. Once you've assembled your natural marble kitchen countertops, the next step is to assemble the backsplash and make sure the backrest is tightly connected to the wall. If there is a gap in the middle, there is no need to take the necessary adjustment measures.

When the area and edges are inspected in an all-right way, a 100% silicone adhesive can be used until it is ready for cleaning. Note: The silicone adhesive used here is best used in light colours and is cleaned from dryness.

Because the adhesive is dry, its color will be indicated by natural marble, while the light color itself is not obvious, which fully guarantees the appearance of natural marble.

Custom cabinet installation acceptance: the cabinet counter also needs to maintain a parallel surface with the wall cabinet, and the door leaf of the box should ensure that the front and back are all neat, the gap is even, and the power switch is flexible. The customized overall cabinet countertop also needs to be waxed, which should be balanced and without wax marks, and the cabinet countertop should be smooth without traces.

Inspecting the appearance is the first step in the acceptance of the project, first of all, to see whether the customized kitchen countertop has scratches, cracks, embosses and bumps. Then reflect the acceptance situation to the merchant, and ask the store to solve the matter according to the prior commitment.

Customized whole cabinet countertops are spliced'area, this place is the key to checking. The gap is generally smoothed with super glue, and the surface should not be marked with super glue, and the stipulation is that there is no obvious patchwork mark from 2 meters away. After the appearance inspection of the cabinet countertop, it is necessary to check the connection between the cabinet countertop and the box, such as the cabinet countertop and the box, whether the middle of the box and the ground is firm and vertical, whether the wall cabinet and the wall are firmly integrated, and whether the middle of the cabinet is closely catered to.

Countertops, cabinets, door panels, accessories, these are all subject to acceptance, and must be carefully accepted.

When customizing cabinets, you can choose the right countertop, and you should book the size of the countertop according to the size of the cabinet, and now the more popular ones are marble and quartz countertops. Pay attention to the acceptance flatness.

For the cabinet of customized products, installation is the last step of cabinet consumption, and it is also the most critical step. Among them, the installation of the cabinet counter is the top priority, and the acceptance is also a key step.

Aojia cabinets Dupont artificial stone.

Precautions for the installation of cabinet countertops:

1. In order to reduce the error between the actual environment and the beginning of the cabinet design after the kitchen decoration, the countertop is installed after the installation of the base cabinet and wall cabinet, which can improve the accuracy of the cabinet installation.

2. Professional glue should be used when the countertop is bonded, and in order to ensure the beauty of the countertop joints, the installer should use a grinding machine for grinding and polishing.

3. It takes half an hour to bond the countertop in summer, and more than an hour in winter.

4. The distance between the range hood and the stove is generally between 750 and 800 mm, and it should be aligned with the stove left and right.

5. Whether it is a decoration worker or a natural gas company to send someone to connect, it is necessary to ensure that the gas connection port will not leak.

6. Generally speaking, the installation of embedded electrical appliances in the overall cabinet only needs to open the power supply hole on the spot, and when assembling the range hood and stove, it is necessary to pay attention to the smoking effect and whether there is air leakage in the gas source.

Check the materials: check whether the finished wardrobe installed by the merchant on site is consistent with the contract, and even if the installation is completed, it can also be confirmed by the number of on-site cutting. Some businesses will have shoddy phenomena, and occasionally the materials of the customized wardrobe that come to the site will not be consistent with the original determination.

Custom wardrobe brands are different, the requirements for the ground are also different, some brands of custom wardrobes require the wardrobe must be fixed on the floor, and some businesses are at the customer's choice. Whether the wardrobe is installed above or below the floor, be sure to confirm in advance, because the size of the wardrobe is different in the two ways; Can't be wasted. This is where a custom-made wardrobe comes in, as it can make the most of the interior area and combine it with the wall.

So after the custom wardrobe is installed, how should the owner check it? Liu Zhilai will give you an analysis, hoping to help friends accept the wardrobe.

The shopping guide in the store often receives complaints from customers**, and most of the complaints belong to the installation quality problems, in fact, there are many problems that can be found through inspection after the wardrobe has just been assembled, and can be solved on the spot. In recent years, customized home furnishings have become a new profit growth point in the field of home consumption by virtue of the efficient use of home space, meeting the personalized needs of consumers, and super modernity.

The main purpose of checking the material is to see if the plate is consistent with the one you choose. Although there are very few people who secretly change materials now, it is better to confirm it yourself. Secondly, it is necessary to confirm whether the color of the lower plate is the color you chose at the beginning, and if there is a color difference or a problem with the material, you can also replace it in time.

The level of the installer is different, and the details presented are completely different, and the so-called details determine success or failure, which is very appropriate here. No matter how good the design is, it also needs a professional installation team to execute. Panel wardrobe:

The overall material is environmentally friendly, and has a certain flame retardancy, more durable, and the cost is a little more expensive than some solid wood veneer wardrobes, but the workmanship and details will be better.

I think if we are a custom cabinet, if we finish the decoration, we must see whether the quality is up to standard, and in this case, it depends on whether he can bear the weight of him.

First of all, look at whether the appearance is the same as your expected design, and secondly, look at the material of the cabinet, whether environmentally friendly materials are used.

1. Go to the drawing, is it the size you made. 2. Look at whether the plate is the same as what you ordered, whether the plate is scratched, and whether the edge sealing is good. 3. Look at whether the hardware equipped by the manufacturer is good or not, and whether the hardware is rusty.

4. Look at whether the master's craftsmanship is good, the closing board should be attached to the wall, the size of the gap between the door panel is the same, and the door panel is not deformed. The above points are generally qualified.

The edge sealing of high-quality cabinets is delicate, smooth, and feels good, the sealing line is straight, and the joints are fine. Big brands use edge banding machines to complete edge banding, broken ends, trimming, chamfering, polishing and other processes at one time, with uniform gluing, stable pressure of pressing edge banding, and ensuring the most accurate size. Check whether the joints of the countertop are obvious, whether there is a rear water barrier, and a front water barrier.

Whether the cutting place is thickened, whether the hole of the stove head is accurate, whether there are scratches on the countertop, and whether there are scratches.

<> check whether the cabinet wood is the wood you chose when you booked, whether there is a misfit at the cabinet fit, whether the corners are installed, and whether there is a problem with the hardware. The factors that need to be taken into account when installing cabinet handles are: first, the habit of opening the door of the family, which determines how much the handle height should be; The second is what the aesthetic requirements are, usually the desktop kitchen cabinet door handle installation is, you don't have to consider whether the location is affected.

When measuring, we should pay attention to the position of the socket reserved in the kitchen, and also understand the height of the brick and the height of the window sill, the location of the inlet and outlet pipes and how to set the gas pipeline, which is conducive to the overall design and structural arrangement of the cabinet. The above is the requirements of the basic measurement standards, please do not despise the designers, good working habits will improve your work efficiency, so as not to make mistakes or be inaccurate to go to the site again to measure, delay time. Writing numbers requires standard practice and application, and the height of the cabinet is around 80-85, which is customized according to the height.

Now the cabinet industry is ambitious to do brands, they have their own production standards, and there are some specifications for installation. Cabinet companies that have no intention of becoming bigger and only seek immediate interests will not be able to talk about any standards and norms. It is believed that over time, society will be self-defeating, and that there can be no loosening when they are combined.

The hanging code piece should be positioned horizontally, tightly combined with the wall, the depth of the wooden plug should not be less than 5 cm, and the combination with the wall hole should be firm and tight, and the fixing nail should not be less than 4 cm.

First of all, you have to check the appearance to see if it is in accordance with the drawings or your own requirements, and then check whether the joints are firm, and then whether the golden fork drawer is pulled freely.

According to the cabinet acceptance should pay attention to the size, if the size is more in line with the overall layout of their room, and there is no quality problem, this time can be accepted, there is no safety hazard.

First of all, we must see whether the hardware is qualified, whether the hardware is the best, we can also open the drawer and close it again, check whether there is damping, and we must see if there are gaps in the cabinets and walls, if there is any unqualified.

Look at whether there are any missing parts in the installed cabinet, whether it can fit together, whether the space in this cabinet is large, and what kind of wood is used in this cabinet.

See if there are any flaws in the installation, see if the fixed one is reliable, open the cabinet to see if there should be any, mainly to see if the installation is uneven, can you put something?

Carefully inspect every corner of the cabinet to see if there is any damage, and then hand over the money to the construction party.

The overall cabinet is the most important component of the kitchen, and the selection and acceptance of its countertop is really crucial. The service life of the overall cabinet is directly affected by the material of the countertop and the installation effect. I will take you to see how to choose the countertop of the whole cabinet and how to accept the countertop of the whole cabinet.

First, the overall cabinet countertop selection.

1. Quartz countertop.

Quartz countertops are characterized by high temperature resistance, and the surface is also very smooth, and the hardness is also very high, and there is also an advantage that it is not easy to be scratched. And the cost of quartz countertops is not too high, and the cost performance is relatively high, which is a better choice for the overall cabinet countertop.

2. Artificial stone countertop.

The artificial stone countertop also has the characteristics of high temperature resistance, wear resistance, compression resistance, etc., and there are no gaps on the surface, which is not easy to hide dirt and dirt, and is easy to clean. Therefore, artificial stone countertops are more popular among all the materials of the overall cabinet countertop.

3. Stainless steel countertop.

The stainless steel countertop is different from the two stone countertops above, and the metal countertop is stronger and easier to clean. However, stainless steel countertops have a disadvantage that they are more likely to be scratched, and the appearance is not as good as that of stone countertops. Stainless steel is used as a countertop in the kitchen of the home, and it is generally more commonly used in the kitchen of public places such as hotels and restaurants.

Second, the overall cabinet counter acceptance standards.

In addition to the material properties of the overall cabinet countertop itself will directly affect the quality of the countertop, the state of its installation will also affect its service life. Therefore, it is very necessary to accept the overall cabinet countertop, so let's take a look at the specific acceptance method. 1. Checking the appearance is the first step of acceptance, first to see whether the overall cabinet countertop has scratches, cracks, indentations and bumps.

And reflect the acceptance situation to the merchant, and require the merchant to deal with the matter in accordance with the prior agreement. 2. After the appearance of the countertop is inspected, it is necessary to check the connection between the countertop and the cabinet, such as whether the countertop and the cabinet, whether the cabinet and the ground are stable and vertical, whether the wall cabinet and the wall are firmly combined, and whether the cabinet is tightly fitted.

3. The countertop should be kept parallel to the wall cabinet, and the door panel of the cabinet body should ensure that the upper and lower left and right sides are all neat, the gap is even, and the switch is flexible.

4. There will be a splicing place on the countertop of the whole cabinet, and this place is the focus of inspection. The gap should be evenly filled with glue, and the surface should be careful not to leave the mark of glue, and it is required that there are no obvious splicing marks from 2 meters away.

5. The countertop of the overall cabinet should also be polished and waxed, and the countertop should be high and uniform and wide without wax marks, and the countertop as a whole should be traceless and clean.

The above is the detailed content of the selection and acceptance of the overall cabinet countertop, which I hope will be helpful to the owners.