What is the connection for the underground heating aluminum plastic pipe to make a hole?

According to your description, this kind of aluminum-plastic pipe for underground heating has made a hole, first of all, this pipe needs to be connected with some connectors called hose clamps.

First of all, it is necessary to determine the chisel of the wall, and then determine whether the pipe in the wall is PPR or PB material, and the pipe connection must be hot melt.

Use two directly hot melt to the two tubes, and a section of PPI tube can be connected in the middle to be pressed and maintained.

If there is a hole in the aluminum-plastic pipe of the underground heating, then you can only use our clamp to connect it. Because it's the safest and longest-lasting connection method.

If the heating pipe is broken, you can't use the pipe pipe pipe First of all, you must open the wall groove, and then judge whether the pipe in your wall is PPR or PB material, and the pipe connection must be hot melt. Heat melt directly with two.

I just checked for you, you can use polyethylene pipe to connect, which is very good.

The plastic pipe of the underground heating has made a hole, and what should be welded with it, because it can be welded with plastic paper, and it can be welded, and then it can be welded, and then the plastic welding can be done, and it is called tape, and it is also okay to transfer the pipe.

The aluminum-plastic pipes are all connected with copper joints, sawed off there, and connected back with a copper joint.

This can be used back with some aluminum-plastic pipes, so it's okay, after all, they are all the same material.

It's also easy to pick up.

Depending on what you are doing with the hole, if you need to seal the hole, you can use a special glue.

Wrap several layers of thread sealant around the threads and reattach the fittings.

So you can connect it.

The underground heating hotel has made a hole, and what connection to use on this issue can only be connected with a professional connection leak-proof valve line to ensure its safety.

In the case of floor heating aluminum-plastic pipes, holes need to be connected with joints.

My home is also aluminum-plastic pipe and Rifeng pipe docking, leaked at the beginning of this year, the copper joint is all green, alas, anyway, the normal connection will not leak, my family is because the bear child is old to step on, we didn't pay attention. You should look at the green and check it quickly.

There is a hole in the bottom shrinkage pipe of the underground heating, and you should find a professional installer for what to use to connect this, because this knot is easy to leak if it is not good. You should find a professional to install it.

Judging from your description, it should be that you accidentally leaked the aluminum-plastic pipe, you can cut off the hardware and building materials store from the middle to buy that kind of joint, you tell him, he will give it to you.

The aluminum-plastic pipe of the heating is moved, so it is naturally connected with the same material!

What money to use to make a hole, go directly to a professional maintenance person, and he will help you pick it up.

For example, if the heating aluminum-plastic pipe is moved, he is to make the aluminum-plastic pipe exhaust, so that it can be collected more evenly.

For other people's methods, I think you can just do a weld and you can do it.

I this is a very good way to impress the hostel and can be connected by conduction.

Make a pipe in the heating, make a hole, use what section to find a professional person directly, he will help you pick it up.

Even if you make a move, you can still take it, and if you take it, you must take the professional test.

What is the connection for the underground heating aluminum-plastic pipe to make a hole? I think it's necessary to ask an expert or consult the relevant department to find a job.

You say that it is okay to buy a new one for him to replace the aluminum-plastic pipe.

What are the connections from the dormitory pipes at the bottom, and if there are any connections, this depends on what the specific methods and contents look like.

This person in charge of the renovation will help you solve it, and you must do a good job of supervision.

Thinking about how to pick it up? It's still a relatively simple question, and this information can be completed by setting a column.

The underfloor heating aluminum-plastic pipe has a hole, and it can be remembered in the memory of the CPU.

Hello, call ** to the after-sales customer service, and they will arrange personnel to come to repair and install.

The aluminum-plastic pipe of the underground heating has a hole, and if you want to connect, you can connect it in the way of a buckle.

Actually, I think if you make a hole, you can use the traffic control to solve it.

<> "Can the aluminum-plastic pipe be connected to the heating?"

Aluminum-plastic pipes can be used for heating, but it has certain advantages and disadvantages, which need to be understood in advance. First of all, the appearance of this aluminum-plastic pipe is relatively beautiful, and the inner wall is also very flat, because the middle is aluminum, and the outer layer is plastic. It is easy to bend during construction, reducing the difficulty of construction.

However, this kind of pipe is prone to joint leakage problems, and is more susceptible to the influence of thermal expansion and cold shrinkage, so its anti-aging performance is not particularly good, and it is easy to deform after repeated operation.

How to choose the pipe for heating connection.

1. Heating equipment is used in winter in northern China, and the average temperature is low. It is a type of heat exchange between air and heat source through a heat source and a heat medium, thereby increasing the room temperature. The commonly used heating equipment in the north is plumbing, and the original design requirement is that the water pipes will freeze when the temperature is below 0 degrees Celsius in winter.

In short, heating is an ancillary service, i.e. the need for water for city dwellers.

2. PPR is a kind of high toughness, high strength, high yield of source work, high temperature creep resistance, high transparency and other characteristics. It is widely used in the manufacture of pipes, sheets, daily necessities, packaging materials, home appliance parts, various films, etc. PP-R pipe, also known as type III polypropylene pipe and random copolymer polypropylene, is a random copolymer polypropylene extruded pipe, which can also be injection molded.

3. PB pipes are high molecular weight inert polymers. PB resin is a polymer complex synthesized from 1-butene as raw material, which is a crystal with special density and is a heteromer with flexibility. It is a high-tech product belonging to the category of organic chemical materials.

It has high temperature resistance, durability, chemical stability and plasticity, and it is odorless, non-toxic, and odorless.

<> heating pipe aluminum-plastic pipe is broken, if the distance is very small, you can use this equal diameter to connect it directly, if the distance is long, use a section of aluminum-plastic pipe of the same specification to connect, and buy the corresponding aluminum-plastic pipe copper fittings.