Why does Galanz microwave oven often burn magnetrons?

Microwave oven burns magnetron.

Most of the reasons are caused by ignition in the furnace, and the general situation is as follows:

1. The microwave oven runs at no load, that is, the microwave function is started when there is no food in the microwave oven. It is strictly forbidden to start the microwave oven with no load.

2. The utensils used are metal utensils or utensils with gold edges.

Silver-edged, none of these utensils can be used in the microwave function.

3. Mica sheet at the output port of the microwave oven.

Caused by moisture, too much oil adheres to cause ignition.

4. Rotary wave microwave oven, the rotary motor does not rotate, it may also cause ignition at the bottom of the furnace cavity, in addition to these reasons, there are some reasons caused by microwave tubes, see the attached figure.

The quality is poor, ** expensive.

Galanz, which was bought for more than 300 years ago, is not bad now, and it has broken in less than 1 year after buying two 550 in a row, one for 1 year and one for 5 months. **It's also 200 more expensive, one is luck, two in a row is not. And the heating is uneven!

12 years ago, the heating was very even!

Galanz microwave oven is really rubbish, my microwave oven is very hard to heat, and recently I burned the magnetron.

Galanz is not of good quality, and the previous Galanz in my house burned the magnetron when it was broken.

The magnetron is more expensive, and the after-sales personnel will let you change it if there is a problem or not, and the profit will be maximized. As soon as my microwave oven was turned on, it crackled, and the after-sales service said that the tube needed to be replaced, but I didn't change it. After consulting online, I bought a mica sheet for only 2 yuan, that is, the white cardboard inside the stove. Troubleshooting.

Most of the reasons for burning magnetrons in microwave ovens are caused by ignition in the furnace, and the general situation is as follows:

1. The microwave oven runs no-load, that is, the microwave function is started without food in the microwave oven cavity, and the microwave oven is strictly forbidden to start without load.

2. The utensils used are metal utensils or utensils with gold and silver edges, and these utensils cannot be used in the microwave function state.

3. The mica sheet at the output port of the microwave oven is damp and adheres to too much oil and causes ignition.

4. The wave turning hole is equipped with a microwave oven, and the motor of the wave accompanies the trembling socks may also cause ignition at the bottom of the furnace cavity.

Summary. Real person: The Glan microwave oven has a certain effect on strong magnets, because the electromagnetic waves generated in the microwave oven will produce a corresponding magnetic field, and strong magnets can attract or repel magnetic fields.

Therefore, when using a microwave oven, you should try to avoid putting strong magnets into the furnace so as not to affect the normal operation of the microwave oven.

True: The Glen microwave oven will have a certain effect on strong magnets, because the electromagnetic waves generated in the microwave oven will produce a magnetic field that corresponds to each other, and strong magnets can attract or repel magnetic fields. Therefore, when using a microwave oven, the disturbance sensitive should try to avoid putting strong magnets into the furnace so as not to affect the normal operation of the microwave oven.

Excuse me, but please go into more detail?

Strong magnets can have an effect on the microwave oven because the electromagnetic waves in the microwave oven generate a magnetic field, and the strong magnet can attract or repel the magnetic field. It is recommended not to put a strong magnet into the furnace to avoid affecting the normal operation of the microwave oven.

Summary. Placing a strong magnet, such as a NdFeB magnet, next to a microwave oven may interfere with the operation of the microwave oven because of the interaction between the microwave and the magnet. But as long as proper safety distancing and proper use are maintained, the Grant Microwave should not have any significant impact.

I understand that if a strong magnet (such as a NdFeB magnet) is placed next to a microwave oven, it can interfere with the operation of the microwave oven. This is because there may be an interaction between the microwave and the magnet in the microwave oven. However, as long as a safe distance is kept and used correctly, the Grant Microwave should not have any significant effect on the strong magnets.

I'm still a little confused, can you be more detailed?

A strong magnet, such as a NdFeB magnet, placed next to a microwave oven may interfere with the operation of the microwave oven because of the interaction between the differential car wave and the magnet. However, as long as proper safety distance is maintained and used correctly, the Grant Microwave should not have any significant impact on the production of Wangdasheng.