Win10 installation can t find hard drive

In general, the hard disk does not need to be driven to be installed.

Different operating systems have certain requirements for the boot program of the hard disk, if there is a problem with the boot program, you can use PE to start the computer, find the boot repair software in PE, and execute it.

Method 1: BIOS settings.

1. Press the boot button, and then keep clicking the BIOS boot hotkey, the non-stop motherboard buttons are different, there will generally be a display at the bottom of the boot brand logo interface, you can also try F2, F12, ESC, DEL These buttons to enter the BIOS.

Go to the left and right arrow keys of the BIOS and switch to Configuration (computer configuration item) and find SATA Controller Mode

Reinstall win10 and can't find the hard disk system software**1

2. Change the hard disk mode to AHCI, press F10 to save the changes and enter PE to install the system normally.

Hard Disk System Software**2

This method is suitable for reinstalling the win10 system when the hard disk cannot be found, which is caused by the win10 original image not having a raid mode driver.

Method 2: Update the driver and initialize the disk.

1. Right-click on the computer and select Manage.

Reinstall win10 can not find the hard disk system software**3

2. After opening the computer management, click the device manager on the left to check whether the disk drive is installed, and try to update the driver.

Reinstall win10 can not find the hard disk system software**4

3. If the driver is installed correctly, click Disk Management on the left.

win10 system software**5

4. If there is an uninitialized hard disk, the initialization prompt will automatically pop up, and the total capacity is less than or equal to 2TB for the hard disk, and the partition table can select MBR. If it is larger than 2T, you can choose the GPT partition form, but please note that the BIOS is in UEFI boot mode. After selection, click OK, and then partition it to use it normally.

When installing the system, the hard drive cannot be found, which is caused by the following reasons:

1. The system disk is not the original Microsoft system disk, but is made by a third party. The program design is not perfect.

2. Install the XP system, but the AHCI option is turned on in the BIOS, and the XP does not have a built-in AHCI driver, so the disk drive will not be found when installed in the middle of the half.

3. The disk is indeed not connected. The power or data cable is not plugged in.

You can change the tool to redo the U disk boot disk, and use the Xiaobai one-click reinstall system tool to make the U disk boot disk, and the specific tutorial can be found on the official website of the Xiaobai system.

There are generally two reasons why the hard disk cannot be recognized after entering the PE:

First, the hard drive itself is damaged and unrecognized, which of course cannot be found in PE.

Second, the SATA HDD controller mode in the BIOS is set to AHCI, and the PE version used is too low to support the HDD in AHCI mode.

It is recommended to go into the BIOS to see if the hard drive is detected. If not, the first case is that the hard drive needs to be replaced. If there is a second case, change the SATA hard disk controller mode to IDE, or use Win8 PE to identify the hard disk.

Disk is the main storage medium of win1032-bit pure version of the system computer, which can store a large amount of binary data, and we sometimes encounter some failures in the process of using the disk, such as the problem that there is no disk in the drive. So how do we fix the problem of no disk in the drive? Today I will share with you the solution to the problem that there is no disk in the win10 drive.

Workaround for win10 drive without disk:

1. Open "This PC" and select "Manage".

2. Select "Disk Management" under "Storage".

3. Right-click "Faulty Disk", select "Properties", open "Properties", select "Driver", and click "Disable" to confirm.

Huichun is the solution to win10 drive without disk,Users in need can follow the above steps to set up,I hope it can help you。

The latest win10 system can only be installed in uefi or gpt partitions, so if we are using the mbr partition to win, we can't install win10, at this time, just fix the orange in the BIOS and change the hard disk format to solve.

Method 1:

1. Restart the computer first, and press " when you turn it onF12 or DEL"Go to BIOS settings.

2. After entering, use the arrow keys to come to ".boot"Pick up the round.

3. Then replace ".bootoption"Change to the hard drive we want to use.

4. So for ordinary people, using 1909 is enough, and if we need new features, 21h2 is also good.

5. Then change all the options to ".uefi"Or".gptAnd save, you can install win10.

Method 2:

1. If our hard disk does not support UEFI format, or is too lazy to enter the BIOS settings to modify.

The solution to the newly installed hard disk of win10 computer cannot find the hard disk is as follows:

1. First of all, right-click "This Computer" on the desktop, find "Manage" in the pop-up list and open it.

3. In "Disk Management", find the hard disk with the same name as the hard disk you installed but cannot be opened, and right-click the hard disk, find "Change Drive Letter and Path" in the pop-up list and open it.

4. Click "Add" in the pop-up dialog box.

5. In the new pop-up dialog box, click "Assign a drive letter" and confirm.

6. Restart Explorer, and you can see that the newly installed hard disk has been restored.

In this case, you have to go to the BIOS to confirm whether the hard disk is recognized, if it is recognized, it should be a problem with the system installation, if it is not recognized, it is a hard disk problem, win10 system, can only identify the hard disk in UEFI format.