Why doesn t my violin sound good, especially the A string 5

The violin consists of 70 parts. Its main components include headstock, body, neck, pins, strings, horses, cheek rests, bows, etc.

The violin body (resonance box) is about centimeters long and is made of curved tops, backs, and sides bonded together. The panel is often made of spruce and has a soft texture; The back and side panels are made of maple wood and have a stiffer texture. Whole maple for headstock and neck, and ebony for fretboard.

The sound quality of a violin is basically determined by its wood and the corresponding structure, on the frequency of the wood's vibration and how it reacts to the vibration of the strings. A high-quality piano is able to transmit the fundamental and overtones of each sound with equal sensitivity.

4 strings. Originally, they were all bare strings made of sheep intestines, and from about the 18th century, the bass G strings were often wrapped with silver wires to make them responsive. In modern times, the G, D, and A3 strings are wound with sheep intestine strings or steel wires wrapped with metal wires, and more recently, nylon strings are also used.

The E string was changed to a steel wire string to give it a better tone in the high register.

The violin is made in a modern style, not entirely from the aesthetic form, but from the needs of its sound and performance. The violin top and back plate have a curved shape to give it a good resonance and a loud pronunciation; The waist is narrow, making it easy to play the high and bass strings; The top and back plate are equipped with inlay strips, which not only prevent the wood from cracking, but also play a certain role in the sound quality of the instrument. There is a column support between the top and the backplate, and its position change has a significant effect on the timbre of the violin.

The lower left side of the panel is glued with a bass beam, which not only plays a reinforcing role, but also has an acoustic role. Paint on the surface of a violin that is too hard, too soft, or unevenly lacquered will detract from the sound quality. When the bow rubs against the strings to vibrate the strings, the top plate vibrates through the horse and the back plate vibrates through the sound column.

Since the sound column is supported on the side of the E string, the E string vibrates less, while the G string vibrates more, resulting in greater vibration in the bass beam and causing the vibration of the resonance box. The ability to get the most out of the sound depends on the strings and their tension, the quality of the horse, the pressure and speed of the bow. In order to express the various sound qualities of the piano, it is necessary to add the player's performance skills such as bowing, fingering, and kneading.

Hehe, it's complete.

Actually, I also know that there are 4 roots, but I just think.

Asking such questions should be learned.

So I don't want to mislead people's children.

The new piano, the sound cavity vibration is not sufficient, and it needs to be pulled and opened. Pull for three hours a day, and after half a year, the tone will improve. Dora will get better.

Also, each string should be tuned in tune and sound harmonious. Then there is the position of the column, which plays a crucial role in the uniform vibration of the four strings. If it's really ugly, ask the piano shop to tune it for you.

It could be too much or too little rosin.

If there is more rosin, the sound will be noisy, and if there is less sound, it will float.

It may be that the quality of the piano is not good, or there is a problem with the saddle.

Practice a lot.

Weather conditions, string quality, method of playing, problems with the instrument itself, position of the saddle.

You can ask me any more questions.

The violin is spiritual, and no matter how good the piano is, if you don't practice the tone well when you first start using it, it will be in vain.

There are several possibilities.

1) Weather reasons.

2) String quality.

3) How to play the violin.

4) Problems with the piano itself.

5) Saddle position.

Let's confirm the following

It's your own reason. It's not enough.

Is your piano handmade? How much does it cost to buy、、、 it is recommended to change a better set of strings,

You ask the teacher to help you tune the piano.

Thank you teacher for the finishing touch, I benefited a lot after reading it.

At first, you don't have to think about sound quality so much. There is definitely an effect of the bow on the sound quality, but there are 2, 1 has to do with the bow itself, and 2 has to do with how you use the bow. It's still too early to learn your skills and it's too early to pull out the CD.

It is recommended that you change the strings after you have changed them, and now you will wear the steel strings. Rub the rosin with a dry towel and never use water.

Hello, the bow has a great impact on the sound quality, the piano and the bow should be matched, in addition, don't choose those cheap pianos. Of course, the sound quality of the new piano will get worse and worse, but it will not change too much, and the rosin should be wiped in time and not delayed.

The sound quality of the piano will get better and better, so you have to practice more, it will be beneficial to practice more empty strings, and you can also adjust your posture, which is very important for beginners.

The bow has an impact on the sound quality, and, if it breaks, the most expensive bow is not worth much; As for the sound quality of the new piano, it may get better and better, or it may get worse and worse, depending on how you play it. The sound quality on the CD cannot be believed, it is electro-acoustic, not real; The rosin on the piano can be tried with rubbing oil.

You can buy a lot of bows, it will have some effect.

The sound quality of the violin is pulled out, the longer you play, the more its sound will become, the more melodious the rosin is not clean, wipe it with a semi-damp cloth, you can.

Usually you can use walnuts to wipe the piano maintenance.

It must have something to do with the piano Maybe your piano is average, but the sound of the piano is getting better and better People CDs are recorded in the recording studio The piano is different You must not be able to play that sound Besides, you are a beginner It may affect the sound effect The rosin has to be wiped with a towel dipped in alcohol If the strings are somewhat affected, but that's when you become a master Now changing a set of 1000 doesn't help much.

Landlord, the sound quality has something to do with what you said.

The bow determines the thickness of the sound, and the rosin on the piano is removed by a way to affect the resonance of the body, causing the sound you hear to be thin and weak.

You can go to the piano shop to get a treatment, it won't be too expensive.

The strings are even more related, otherwise how could there be so many hundreds or thousands of strings? And often this kind of string will break within a month, because there is no way to guarantee the life of the pursuit of the ultimate sound, so the strings do not have to buy the best, usually practice with a medium one.

The sound of the new piano will be better and better to a certain extent, but there will be no qualitative change.

The basic skills are not in place, and I can't control the piano at all.

Summary. There are generally two ways to play chords: broken chords and non-broken chords, which are generally known as two rings and one ring.

A two-tone chord is a two-tone two-tone pull, whether it's a three-tone or a four-tone, and there can be no single note in it. It's not just a random arc of the bow, a symbolic walk from a few strings, regardless of the quality of the pronunciation. There are techniques and practice steps to play loud chords.

Is the chord the same for every song on the violin?

There are generally two ways to play chords: broken chords and non-broken chords, which are generally known as two rings and one ring. A two-tone chord is a two-tone two-tone pull, whether it's a three-tone or a four-tone, and there can be no single note in it.

It's not just a random arc of the bow, a symbolic walk from a few strings, regardless of the quality of the pronunciation. There are techniques and practice steps to play loud chords.

Not all the same.

Question: Is it easy for cello strings to get caught in the strings? Answer:

The cello A string is one of the four strings of the cello and is located at ** and is the string with the highest vocal range. In general, cello strings do not tend to get stuck in the strings, but in the case of stringed instruments, this may occur due to the use of long periods of time and the material of the strings themselves. If the cello string is prone to getting trapped in the string, there are a few steps that need to be taken:

Check how tight the bow is, if it is too tight, it may cause the A string to sink into the string. You can relax the bow appropriately, or readjust the tightness of the bow. Check the tension of the A string, if the tension is too high, it will also cause the A string to sink into the string.

You can adjust the tension of the A string appropriately, or change the A string that suits you. Check the height of the strings, if the height of the strings is too low, it will also cause the A strings to sink into the strings. You can find a professional luthier to adjust the height of the bridge.

Check your playing posture, if you play incorrectly, it will also cause the A string to sink into the strings. You can consult a professional teacher for correct posture training. It is important to note that playing the cello requires a certain amount of skill and experience, and if you encounter problems, you can seek professional help.

It is not uncommon for cello strings to get caught in the strings, especially for beginners. This is because the diameter of the A string is thinner, which makes it easier to be pressed into the string groove than other strings, resulting in poor source celery sound quality and playing experience. In addition, A-strings that have been used for a long time are prone to string breakage due to their thin diameter.

Therefore, cello strings should be checked and replaced regularly to ensure the effect of playing out of posture and the longevity of the instrument.

Summary. Hello dear <>

The cello A string is easy to sink into the string, and the A string is thinner and easy to sink into the piano mali.

Is it easy for a cello A string to sink into the strings?

Hello dear <>

The cello A string is easy to sink into the string, and the A string is thinner and easy to sink into the piano mali.

The cello is a stringed instrument, but it has only four strings. The first string of the cello is called the A string, and the tone produced is relatively high and very tense; The second string is called the D string, and compared to the A string, the D string has a lower pitch and has a fuzzy and hazy feeling; The third string is called the g-string; The fourth string is known as the C string. The tones of the G and C strings are low and deep, but in addition to that, they are very loud.

I wish you a happy life! Hope mine is helpful to you ha.

This problem also occurred when I first started studying.

When you have studied for a certain amount of time and become more familiar with the practice, it will be better.

When it comes to playing a double tone, only one string is the main problem is that you don't push hard enough, or the angle of the bow string.

You need to press down a little harder, so that you can pull out two notes.

And always pulling other strings, it is estimated that it is with your posture of holding the bow, or the bow is not good, you need to pay more attention to the swing of the lower arm.

Hope it helps.

In addition to the possible problems of the violin itself, it is a manifestation of your lack of bow skills! It's the plane of four single strings and the plane of three double strings that are not practiced well.

Hehe, it's good that you can notice.

It must be a beginner to learn the violin, which is normal, don't want to become a big fat person in one bite.

Everyone who plays double tones and single tones will encounter such problems.

The key is that practice makes perfect, just pull slowly. There's really no specific workaround.

But pay attention to the violin posture and the swing of the forearm, and grope slowly.

Hope that the piano skills will improve.

You pull the A string to the E string and the D string, is it both strings at the same time or what? If two strings appear at the same time and become double tones, then you have to consider whether the curvature of the piano and horse is enough, you can take it to the musical instrument city or the piano factory to let the master see.

Both of these problems are caused by the lack of a solid foundation in the right hand, do more plane exercises, more specifically every day, and slowly get better.

Kiss hello <>

Dear users, I can give you some explanation about the problem that cello strings tend to get stuck in the strings. First of all, it's not very common for cello strings to get caught in the strings, but it's not completely non-existent. This is usually due to the bow hairs being too loose or not strong enough to pull the A string up, resulting in a trap.

In addition, it is also possible that the quality of the A string or the use of the string for a long time may cause the tension of the string to be insufficient, and it is easy to be pressed by other strings. In order to avoid the situation where the cello strings get trapped, we can take the following measures:1

Replace the A-string regularly to avoid insufficient tension due to prolonged use. 2.Adjust the bristles of the bow to ensure that the bow force is moderate.

3.Pay attention to the angle and strength of the bow and avoid overly loose or tight bow hairs. 4.

Use high-quality strings and bows to improve the quality and stability of your playing. In short, it is not very common for the A strings of the jujube state to easily get trapped in the strings, but we still need to pay attention to the quality and use of the strings of the bow bench to ensure the stability and quality of the performance.