What is the thirteen story building equipped on what floor? What is the channel steel floor of a thi

The channel steel floor of the 13-story building is generally on the 6th or 7th floor.

Due to the noisy equipment floor, in order to avoid disturbing the owner's rest, the equipment floor is usually arranged in the basement or the top floor. And most of the machine room is used for the layout of air conditioning, electrical, elevator machine room and other equipment.

The 13-story channel steel layer should be on the sixth or seventh floor, because the total 13-story house belongs to a small high-rise house, so the channel steel layer is generally on the middle floor.

The device should be on top of the 13th floor, on the topmost floor. Normally, it will be around the 6th or 7th floor.

It is installed on the 6th and 12th floors. Because of the channel steel layer of the building.

Generally, it is six floors and one place, and the other way down is the channel steel layer, of course, there are also buildings that are five floors and one place, so the specific number of channel steel floors in the building needs to be decided according to the total height of the building and the construction method.

The total height of the channel steel crane is generally not greater than 20 meters. The channel steel layer of commercial housing is generally in the first layer, and it may have a layer of channel steel layer compartment.

Classification of channel steel:

Channel steel is divided into ordinary channel steel and light channel steel. The specification of hot-rolled ordinary channel steel is 5-40. The specifications of the hot-rolled switch-through channel steel agreed by the supply and demand parties are. Channel steel is mainly used in building structures, vehicle manufacturing, other industrial structures and fixed panel cabinets, etc., channel steel is often used with I-beams.

Used together. There is no problem with using it as a small compartment. There is also scaffolding on the seventh to eighth floors of commercial housing.

Set up a layer of channel steel. In some places, 4102 on the first floor is a channel steel layer, but the house on the first floor is relatively damp, and the phenomenon of moisture regain is more serious. Especially in the rainy season in the south, the humidity will be more severe and there will be more mosquitoes, so it is not suitable for rheumatism.

of people living there.

9th floor, 16th floor, 23rd floor.

Generally speaking, the livable floors of buildings with different total floors are different, and the best floor of the building is between 3 1 and 3 2 of the building, so you can confirm the total number of floors of the building before choosing the floor of the house. For example, the total number of floors is a 30-storey building, and the livable floors are between 10-20 floors.

The effect of the channel layer.

It is necessary to pay attention to the house made of channel steel, when people walk on it, there will be a certain shaking sound. The smaller the channel steel specification, the louder the shaking sound, and the larger the channel steel specification, the smaller the shaking sound, so it will have a certain impact on residential life.

It should be noted that the edge of the channel steel of the previous channel steel layer will be exposed to the outside, and when it rains and snows, the water will flow into the building through the channel steel, and seriously it will penetrate into the house, causing the wall to be soaked in water and bringing unnecessary trouble to the residents. Moreover, the previous channel steel will rust when exposed to water, and it will also affect the firmness of the building for a long time.

However, the channel steel package of the channel steel layer is treated quite strictly, and the surface of the channel steel will be coated with a thick zinc layer to generate a zinc-iron alloy, which makes the channel steel have considerable corrosion resistance, so there is no worry about buying the channel steel layer now.

The above content refers to Encyclopedia - Channel Steel Layer.

There is no fixed floor standard for the channel steel layer, and the position of the channel steel layer is different in different buildings.

The channel steel layer of high-rise buildings is located on the first floor or about the 7th to 8th floor, which is built by many long strips of steel with grooved cross-sections.

The channel steel layer will make a lot of noise when people walk on it, and there will be a certain amount of shaking, which will have a lot of impact on life, and the channel steel stretched out by the channel steel layer of the house will often be corroded by rain, ice and snow, and it will not only affect the appearance of the house for a long time, but also have potential safety hazards.

Summary. The channel steel layer is generally on the first floor, the seventh floor, the thirteenth floor, the nineteenth floor, the twenty-fifth floor, etc. 23-storey building each.

The sixth and seventh floors will be designed with a channel steel layer. In fact, at present, various wrapping measures are generally carried out at the channel steel where the channel steel layer of the house is extended. Therefore, the channel steel layer will not have any important impact on the quality of the house.

What are the general floors of the channel steel floor of a 23-story building?

The channel steel layer is generally on the first floor, the seventh floor, the thirteenth floor, the nineteenth floor, the twenty-fifth floor, etc. 23-storey building each.

The sixth and seventh floors will be designed with a channel steel layer. In fact, at present, various wrapping measures are generally carried out at the channel steel where the channel steel layer of the house is extended. Therefore, the channel steel layer will not have any important impact on the quality of the house.

Are the channel steel floors on the 23rd floor 10th and 17th floors 10th and 17th floors?

6 and 7! Are they 6 and 7 floors?

Right! Two layers in a row.

The channel steel layer of the building is located on the 6th floor, 12th floor, 18th floor, 24th floor, 30th floor and other floors, because the channel steel layer of the building is generally placed in six layers, and the channel steel layer is counted six floors downward.

Of course, there are also buildings that are placed with five floors, so the specific number of channel steel floors of the building needs to be decided according to the total height of the building and the construction method.

If the number of floors of the building is 28 floors, then the channel steel layer of the building is generally 6 or 9 floors. In fact, the owner does not need to worry too much about the problem of the channel steel layer, because the current channel steel layer has been treated with anti-corrosion, and it will be wrapped very tightly, so there will be no corrosion as before.

The so-called channel steel layer refers to the floor made of channel steel, which is a long strip of steel with a grooved cross-section. Due to the special shape and load-bearing capacity of channel steel, channel steel is generally used in building structures, curtain wall engineering, mechanical equipment and vehicle manufacturing.

When choosing housing, you should choose the front and back of the building without blocking, because for living, lighting and ventilation is very important, if the lighting and ventilation of the house is not done well, it is likely to affect the future life, indoor dampness, will lead to mold on the wall or furniture, and worse, it may cause the wall to fall off, and affect the beauty and living experience.

Generally, developers will build a channel steel layer on the seventh or eighth floor, and if a channel steel layer is set up on the seventh floor, then the 10th floor, 17th floor, 24th floor, 31st floor, etc. also belong to the channel steel layer. The details are as follows: under normal circumstances, developers will build a channel steel layer at the position of the seventh or eighth layer, and the channel steel layer generally has three layers, if a channel steel layer is set up on the seventh floor, then the 10th floor, 17th floor, 24th floor, 31st floor, etc. also belong to the channel steel layer.

The specific number of layers where the channel steel layer is located is generally determined by the specific construction method of the real estate, and the position of the channel steel layer is also different if the number of floors of the building is different. If the number of floors of the building is 18 floors, then the channel steel layer is generally located on the 10 and 12 floors. The channel steel layer is a floor paved with channel steel, and the channel steel is a long strip of steel with a grooved cross-section, and it is best to avoid the channel steel layer when buying a house, because a lot of machinery and equipment are stored in the channel steel layer, which may produce a lot of noise during operation and affect the rest.

The channel steel floors of 33-storey buildings are usually on the 3rd, 10th, 17th, 24th and 31st floors.

For buildings with a height of less than 30 meters, the channel steel layer is usually located in the basement or top floor, the roof. When the building has a large number of floors, the channel steel layer is usually located on a certain floor in the middle of the building. When buying a house, you can consult the sales department of the developer, and the general high-rise residential buildings usually have a channel steel layer on 10-20 floors.

The floor height of the channel steel layer is generally meters, and the specific floor is found to be 10 to 20 floors, and the lowest floor height is the channel steel layer.

As construction equipment generates sound, vibration, radiation, etc. during operation. If the sound insulation and shock absorption measures are not good, the room near the channel steel layer is susceptible to noise and vibration. Therefore, try to avoid the channel steel layer when buying a house.

Disadvantages of the channel steel layer.

1. Easy to leak. The channel steel layer is prone to water leakage. Because the channel steel layer will be cantilevered during construction, although it seems to be no problem temporarily, if the construction is not in place, it is easy to leak water in the later stage, or cause snow and rain water to flow into the building, resulting in water immersion in the wall.

2. Easy to rust. The previous channel steel layer will not only leak, but also rust when the channel steel encounters water, and the firmness of the house will not be guaranteed after a long time. However, the houses built now, even the channel steel layer, are reinforced, and the surface of the channel steel is coated with anti-rust paint, so there is no need to worry too much.

3. Noise interference. Since the channel steel layer is built with channel steel, it will shake compared to other floors, especially when people walk on it, there will be a squeaky sound. Generally speaking, the smaller the size of the channel, the louder the shaking sound.

Nowadays, residential buildings are made of large channel steel, and the general sound is inaudible.

Summary. It is not very good to buy a channel steel layer.

The channel steel layer is a floor paved with channel steel, and the channel steel is a long strip of steel with a grooved cross-section, which belongs to carbon structural steel for construction and machinery, and belongs to the section steel with complex sections, and its cross-sectional shape is groove-shaped. Channel steel is mainly used in building structures, curtain wall engineering, mechanical equipment and vehicle manufacturing.

The 18-story building, the channel steel floor is between the 13th and 14th floors, is it good to buy the thirteenth floor?

It is not very good to buy a channel steel layer. The channel steel layer is a floor paved with channel steel, and the channel steel is a long strip of steel with a grooved cross-section, which belongs to carbon structural steel for construction and machinery, and belongs to the section steel with complex sections, and its cross-sectional shape is groove-shaped. Channel steel is mainly used in building structures, curtain wall engineering, mechanical equipment and vehicle manufacturing.

The channel steel layer has a certain impact on the house. The channel steel layer is built by a lot of channel steel, and the channel steel is a long strip of steel with a grooved cross-section. And a house made of channel steel, when people walk on it, there will be a certain shaking sound.

The smaller the channel size, the louder the shaking sound. The larger the channel size, the smaller the shaking sound. For this reason, it will also have a certain impact on life.

So, not very good.

Why. That is to say, the rooms on the channel steel floor are mostly iron buildings, which is equivalent to people living in iron buildings.

I'm talking about a concrete shear wall, with a total height of 18 floors, and the channel steel layer is between the 13th and 14th floors.

Can be bought. Will it leak and what are the disadvantages.

It doesn't leak rain, but it may be cold in winter.

Why is it cold.

Because the channel steel layer is dominated by multi-iron.

On the 6th floor, 12th floor.

Under normal circumstances, the channel steel layer of the building is located on the 6th floor, 12th floor, 18th floor, 24th floor, 30th floor and other floors, because the channel steel layer of the building is generally placed on six floors, but the specific number of channel steel layers of the building needs to be decided according to the total height of the building and the construction method, and the channel steel picket.

The total height is generally not greater than 20 meters.

7-8 floors. There is a certain distance between the 7th floor and the surface below, which avoids the impact of noise such as car horns, and is relatively quiet, even if there is a building ahead, 7-8

The height of the floor will not be blocked by the light of the front building, and in fact, the stairs are broken, and the stairs are not too tiring to climb, so the location is excellent. The higher the layer.

**The more expensive, but from other aspects, the floor height is not all good, for example, as you said, the 9th-11th floors belong to the dust layer, too.

It is the floor with the most air pollution, and the best is the 7th and 8th floors.

Floor Introduction: According to the "Residential Design Code", the height and number of floors of civil buildings are divided into:

1st and 3rd floors are low-rise residences;

4 floors and 6 floors are multi-storey residences;

7 floors and 10 floors are medium and high-rise residential buildings (also known as small high-rise residential buildings);

The 11th and 30th floors are high-rise residential buildings;

30 floors or more (excluding 30 floors) are super high-rise residential buildings.

Each floor has its own microclimate. Different floors have different impacts on their lives:

1. From the first floor to the third floor, people usually live under the canopy, very close to the ground, and can often hear the sound of the right branches banging on the windows; To speak the heart.

Rationally comfortable, here is the best; Stay in touch with the outside world and don't have to look down at people. But life close to the ground also has no

Air circulation is slowed down, air ventilation is blocked, shadows and humidity are increased, and pollution is also more serious. Because cars and asphalt roads make empty.

The gas is full of formaldehyde and carbon monoxide. It is safe to stay at least 200 meters away from the main road of the road. It is generally believed that the 3rd floor is the most ideal, and this.

It is precisely the height of the accumulation of a large number of harmful substances. There are far fewer harmful substances on the 5th floor as they start to sink or go horizontally.

to dissipate. 2. The air on the upper floors is not as fresh as imagined, and chimneys of all sizes almost surround the city, and it is inevitable that more than 30 meters will gather.

Harmful substances. 3. Another invisible enemy of high-rise residents is electromagnetic radiation. The reinforced concrete structure chases the radio waves from the electrical equipment along.

The house circulates quite a bit up to the top floor. As a result, high-rise residents are often heartbroken or in a bad mood. It's also hard to live on the 20th floor.

Avoid noise. Sound usually travels in the shortest route, but sometimes the noise on the main line of the car is also heard from the upper floors.

The channel steel outer pick-up frame is generally controlled at 20 meters.

The average residential building has a floor height of 3 meters and 20 meters, which is 6 floors.

If you start from the 2nd floor, it is the 8th floor; If you start from the 3rd floor, it is the 9th floor.