What are the things to pay attention to when raising grasshoppers?

1. Eat: Meat and vegetarian matching, mainly vegetarian, preferably carrots, each one a large amount of nails per day is enough, occasionally supplemented by bread worms.

2. Drink: You don't need to drink water, just use a wet towel to plop on the table and let him crawl, replenish water and clean the whiskers at the same time.

3. Living: The space of the grasshopper cage is narrow, which is easy to cause joint diseases, so there is more time for the grasshopper to come out for a walk.

4. Feeding the grasshoppers in winter, when it is higher than 27 to 28 degrees Celsius, the grasshoppers will begin to chirp loudly, but do not put the gourd used to raise the grasshoppers on the heating to bake, and the long-term chirping will also shorten the life of the grasshoppers.

When the ambient temperature drops below 20 degrees Celsius, around 16 degrees Celsius, the gnats stop chirping. Of course, the temperature should not be too low, and it is easy to cause the death of the gnats when it is below 0 degrees Celsius.

Hello! There are four aspects that need to be paid attention to in the cultivation of grasshoppers:

First, the construction of breeding ponds.

Raising grasshoppers is divided into greenhouse ecological breeding and indoor breeding, the former technical demand is too high, the main market is to do appreciation, do not advocate everyone to start. Indoor farming is the most friendly way for novices, raising grasshoppers does not require a lot of space, and the number is more than that. Prepare some three-layer boxes, every 30 cm or so, each layer of 5-10 cm of fine sand for the grasshoppers to lay eggs, and seal them with gauze around them, which is breathable and prevents them from escaping.

Each floor reserves a place to put food and a place to prevent food, which is convenient for daily breeding, and it is more suitable for about 800-100 crickets per square meter.

2. Environmental management.

Due to its small size, the temperature requirements are relatively high, and a slightly lower temperature can easily lead to its batch death, and the daily more suitable temperature is about 25-28, and it needs to be maintained for a long time to be relatively stable. Large fluctuations in temperature will affect its normal growth. Secondly, the inside of the breeding room should be well ventilated to avoid hot and humid inside, which will greatly affect the growth of crickets, and keep there is no peculiar smell inside.

3. Spawning and introduction.

During the mating period, the grasshopper tries to let one male and one female mate alone, otherwise it may cause a fight due to the mate. The eggs of crickets are usually buried in the soil at a depth of about 4 cm, and they are laid around October every year and hatch around May of the following year. In order to be safe, farmers may need to take out the eggs and store them by themselves to ensure hatching, and the number of eggs produced by each pair is about 200-300 eggs.

Fourth, the cultivation management.

The most important point when breeding grasshoppers is the freshness of the food, crickets are very picky about food, and they generally will not eat fresh food, so farmers should pay attention to this aspect. Insects are omnivores, whether they are other small insects or vegetables and so on, they eat it, but for their health, they are generally mixed feeding, and some animals can also be fed after the fresh internal organs are crushed.

Vegetables such as carrots and cabbage can be fed, but try not to have water on the vegetables. Feeding about 2 times a day is OK, and the feeding is freshly fed.

In our daily life, it is common to see some uncles raising gnats to pass the time. So, what are the precautions for raising grasshoppers? First of all, it should not be overfed, because the digestive system of the gnats is not particularly strong, and a large amount of overeating can easily cause food accumulation.

At the same time, do not feed sweets to the grasshoppers, because some foods that are too sweet and sticky are easy to stick to the antennae and body parts of the grasshoppers, which will affect the overall appreciation value of the grasshoppers. And when feeding the grasshoppers, be sure to take them out and feed them, because it is easy to breed bacteria if you feed food in the breeding utensils. At the same time, do not feed bread worms, because the gnats will catch fire if they eat them.

Raising grasshoppers should pay attention to putting them in a well-ventilated environment, and not allowing them to be exposed to the sun. Feed it with fruits and vegetables, increase its nutritional intake and keep it warm in winter, and finally try to keep it away from animals that can harm them.

To raise grasshoppers, you first need to inject holes to disturb the container where the grasshoppers are placed, you can use small bamboo cages, small jars and other things, and keep the grasshoppers in a good ventilated environment, and can not let the grasshoppers be exposed to the sun.

The second is to feed the grasshopper food, we usually use fruits and vegetables to feed it, but in the winter, we should also pay attention to feeding it some more nutritious food, which can prolong the life of the grasshopper.

Then in the winter, we also have to pay attention to keeping the gnats warm, there are many grasshoppers who have the skills to keep the grasshoppers warm, we can ask them for advice and learning. Finally, try to keep the gnats away from animals that can harm them, such as cats, mice, etc.

1. Avoid humid environments.

Grasshoppers like to be dry and afraid of moisture, so they should be cleaned and dried frequently, but moistening their feet and whiskers is necessary, and they can be moved on a towel moistened with warm water during the feeding process.

2. Do not feed in insect tools.

Regardless of whether the gourd or the tube is used to raise the grasshopper, the grasshopper must be released to feed, the space in the insect tool is small and limited, and there will be the excrement of the grasshopper. If the food is put into it, it will inevitably cause the internal environment to be filthy, affecting the growth of the grasshopper, and then feeding after the release of the grasshopper, and by the way, you can also move the limbs, killing two birds with one stone.

3. Avoid overfeeding.

Although the new moult needs a lot of nutrients, because the body is not yet fully mature, the digestive system is relatively weak, and if it is overfed, it will hurt the insects, and its song and appearance will be affected. Generally, after eating the old skin, you can feed a hemp root worm or corn worm on the second day, another one on the third day, and start feeding half a cooked edamame on the fourth day, and then feed half a edamame-sized food every day.

4. Avoid feeding sweet or sticky foods.

Grasshoppers should try to avoid feeding too sweet or sticky food, because these foods are easy to adhere to the claws and whiskers of the grasshoppers, causing the grasshoppers to bite the tips of their claws, break their whiskers and claws, and greatly reduce the value of the reward.

1. Shed farming. Shed cultivation includes greenhouses, arch sheds and earth heating sheds, etc., and arch sheds can be used for initial grasshoppers. Grasshoppers like to grow in the leeward and sunny and dry places, when building sheds, they should avoid low-lying damp and wind outlets, and after selecting the terrain plots, plant soybeans or wheat first, so as to prepare the grasshoppers for free feeding.

2. Indoor farming. Indoor breeding covers a small area, easy to manage next to potatoes, not affected by climatic conditions, can be built with cement and bricks about 80 cm high, the width of the speed to the length of the board or cement board shall prevail, the interval or the length can be, generally three layers of the best, low waste of space, high is not easy to manage. A layer of 10 cm thick sand is placed on top of each layer of slab for the grasshoppers to lay eggs in the future, and then fixed to the top of the board with iron mesh or sand window cloth to form a multi-layered three-dimensional grasshopper breeding ground.

Precautions: In daily feeding, pay attention to avoid the encroachment of other animals such as cats and mice on the grasshopper, and do not light mosquito coils or spray insecticides near the cage of the grasshopper. In the late autumn, the temperature of the number of Chang oak dropped greatly, even if measures should be taken to keep it warm and prevent it from freezing to death.