The fire power around the gas stove is large, and how to choose the fire power of the gas stove

First of all, we must determine the left and right; Facing the gas stove, the left hand side is left and the right hand side is right. As shown in the figure below.

There is no mandatory provision in the national standard. Look at the figure above for the rated heat load.

The side with a large data rating of heat load has a large firepower.

The two gas stoves on the left and right of the natural gas stove can be adjusted in terms of firepower.

The size of the gas stove is generally adjusted by igniting the fire and turning the knob. If a bright yellow flame appears, it means that the flame temperature is low and the fire power is small; The presence of a pure blue flame indicates a higher temperature and greater force.

Fire lid shape. Gas cookers are divided into direct fire covers and rotating fire covers according to the shape of fire covers. In general, the rotating fire lid is more efficient and the fire is more concentrated, which is suitable for stir-frying.

However, the carbon monoxide content in the flue gas of the rotating fire is easy to exceed the standard, while the fire power of the direct fire cover is relatively uniform, and the carbon monoxide content in the flue gas is generally not easy to exceed the standard.

Extended information: Good burner, light blue flame, strong firepower, uniform flame height and size. If the flame is very small, it is abnormal. The main reasons for the small amount of flames produced and the methods of their elimination are as follows:

1. When the gas stove is cooking food, occasionally overflow flows out or foreign matter falls into the fire hole, which blocks the fire hole of the burner, so that the flow of gas and air mixture is blocked, and the flame is small and weak. The method of elimination is to remove the burner, clean the blocked fire hole, and scrub it with water. After such treatment, the fault of the burner with a small flame can generally be eliminated;

2. The air source is running out quickly. When the LPG in the cylinder of the gas stove is about to run out, the combustion flame will be small due to insufficient pressure or too much residual liquid in the cylinder. At this time, the cylinder should be replaced with a new one;

3. The nozzle of the pressure reducing valve or the nozzle of the gas stove is blocked. When the pressure reducing valve or the nozzle of the burner stove is blocked, the gas is not emitted smoothly and the combustion flame is weak and weak. The elimination method is to dredge the nozzle with a thin steel wire;

4. The angle valve is too small, and the large angle valve can be opened at this time;

5. The gas volume is small when the hose is flattened or bent. If the flow of the hose is blocked when it is bent, the hose can be straightened; If the hose is flattened, it can be replaced with a new one;

6. The gas stove using the pipe burner may also cause a small flame due to the small diameter of the pipe and the corrosion and blockage in the pipe. You can contact the gas company to solve the problem.

How to choose the size of the gas stove: look at the energy efficiency label of the gas stove: because the energy efficiency index, also known as the fire index, is newly proposed and has not been included in the national standard for the time being, it is not clearly marked on the gas cooker.

The calculation method is: on the basis of first-level energy efficiency, heat load * thermal efficiency = energy efficiency index (fire index). One reason for the introduction of the energy efficiency index is to set a threshold for some products with high power but low energy efficiency.

Some miscellaneous products often sacrifice energy efficiency to simply pursue high firepower, only using high fire power as a gimmick to mislead consumers, these inefficient products will emit a large amount of carbon monoxide and nitrogen oxides, seriously damage consumers' health and pollute the environment. Therefore, to use the energy efficiency index to choose a stove, we must see whether it is a first-class energy efficiency. Look at the heat load of the gas stove:

Heat load is an important indicator to judge the size of the firepower of the cooker, since the national energy efficiency level management norms came out, there are also European and American energy-saving technologies, regardless of China's actual eating habits of the product is popular, and in order to improve the thermal efficiency at the expense of the firepower of the gas stove, ultimately lead to a longer cooking time, smoke machine time and longer lighting, both waste time and do not achieve the real energy-saving gas cooker. So don't be deceived by some so-called energy-saving stoves. This answer is suitable for most gas stove models such as Boss 7G10 and Vantage JZT-I10002B.

Chinese families have the habit of stir-frying. Generally speaking, the heat flow is the basic requirement for stir-frying. The more firepower, the better.

Too much firepower is wasted if it is not effectively absorbed. The choice should be based on actual needs. Generally, it can be used at home, and the thermal efficiency of the gas stove is also an important indicator.

If the power is high, but the conversion rate is low, then this cooktop not only consumes gas, but also the effect is not ideal. Extended information: Good burner, light blue flame, strong firepower, uniform flame height.

If the flame is small, it is not normal. The main reasons why the flame is small and the ways to eliminate the big message are as follows:1

When cooking food, the gas stove occasionally spills or foreign objects fall into the fire hole, blocking the burner fire hole, so that the mixed gas of gas and air flows out, and the flame is small and weak. The method of elimination is to remove the burner, clean the blocked fire hole, and scrub it with water. After such treatment, the small flame failure of the burner can generally be eliminated; 2.

Running out of air**. When the LPG in the cylinder of a gas stove using LPG is almost exhausted, the combustion flame will be smaller due to insufficient pressure or too much residual liquid in the cylinder. At this time, the cylinder should be replaced with a new one; 3.

Clogged pressure reducing valve or gas stove nozzle. When the pressure reducing valve or burner nozzle is blocked, the gas injection is not smooth and the combustion flame is weak. The elimination method is to dredge the nozzle with a thin steel wire.

<> "Which fire power is on the left and right sides of the gas stove."

The fire on the right side is big, in fact, it is related to the usual living habits, most of them are used to the right hand, and the amplitude of the right hand will be slightly larger, and it is easy to use, if there are other things placed on the right, it will have an impact on the use, so it must be distinguished, usually the left side is used to make soup, and the right side of the rough noise is hot, and it will be used to stir-fry better.

What to pay attention to when using a gas stove.

1. Before using the gas stove, you must read the manual, you must operate it according to the requirements, and the stove can only be used in a ventilated environment.

2. It is also necessary to check whether there is a gas leak in the pipe of the gas stove regularly, and you can apply soapy water to the interface to judge, if there are bubbles coming out, it can mean that he is leaking and needs to be repaired. If the hose is found to be aged or worn, it is recommended to replace it. The service life of the hose is about 1 year, and the installation length should not exceed 2 meters.

3. If you find that the gas stove is leaking, you must turn it off immediately, you need to clear the fire, no electrical appliances can be opened, and the window should be opened for ventilation, and the relevant personnel should be notified to overhaul. Gas stoves can not be installed in bedrooms and kitchens, if there is an air leakage sensitive stool, it will poison people, and the flammer can not be placed next to it to prevent fire accidents.

4. When using the gas stove, there must be someone watching next to you, and you can't leave it for too long, so as to prevent the soup from pouring the fire and causing air leakage. Before going to bed, check whether the switch is turned off to prevent the danger of air leakage.

The use of kilowatts is very appropriate, and there is no such thing as bigger is better.

The state requires that the rated main heat flow of the gas stove is greater than that. When the rated main heat flow is exceeded, it is called a fierce fire stove. The fire power of ordinary household gas stoves is equal.

Generally speaking, the gas stove with high fire power is more suitable for everyone's cooking habits, but the heat load of the gas stove is not the higher the better. If the thermal efficiency is high, the current fire power of the gas stove can be reached, and the thermal efficiency is close to 60%.

Tips for choosing a gas stove:

1. Choose a color.

For the purchase of this type of product, it is recommended to choose a product with a stainless steel panel if the color of the cooking area is black and white. If the cooking area is more colorful, it is recommended to choose a tempered plate, which can increase the overall aesthetics.

2. Look at the panel material.

I believe we all know that the panel materials of this type of product are relatively diverse, among which stainless steel will be more heat-resistant and easier to clean. Tempered panel is a relatively durable and beautiful product. The surface of the ceramic is treated with paint, so the gloss and aesthetics will be relatively high, but it is easy to break.

3. Look at the firepower.

For the judgment of firepower, the first thing to look at is the heat flow, usually the heat flow of a good equipment is about in the kilowatts. Secondly, we should pay attention to the effective firepower, that is, the amount of heat flow that the pot can absorb, of course, this is mainly determined by the thermal efficiency of the gas stove.

Hello dear, I'm glad that Liquid Crack answers your <>

The maximum power of a household gas stove is generally in kilowatts to kilowatts. The gas stove at home requires at least one burner to be high-power to meet the needs of stir-frying, that is, the heat flow is generally selected in kilowatts to kilowatts. You can choose the gas stove in the largest firepower is the fierce stove, he is more firepower than the ordinary stove, mainly used to fry ribs and other things that are difficult to cook or want to bury regrets quickly, very suitable for stir-frying" I hope this service can help you Jingzheng, you can click on my avatar to follow me, and if you have any questions in the future, it is convenient to consult me again, and I look forward to serving you again.

Wishing you well; Happy life, everything goes well [warm] [warm].

The difference between natural gas fire stove and ordinary stove is: different energy consumption, different uses, and different ignition methods.

First, the energy consumption is different.

1. Fierce fire stove: The fierce fire stove adopts upper ignition, lower gas, and mechanical pressurization.

The energy consumption of forced combustion is greater than that of ordinary stoves.

2. Ordinary stove: The energy consumption ratio of ordinary stove is high, and the energy consumption is less than that of fierce stove.

Second, the use is different.

1. Fierce fire stove: The fierce fire stove is mostly used for family outdoor leisure, restaurants and hotel supplies, and places that require fast heating speed and short time.

2. Ordinary stove: Ordinary stove is mostly used in households, and there is no specific requirement for heating time. 3. The ignition method is different.

1. Fierce fire stove: The ignition method of fierce fire stove includes manual ignition and piezoelectric ceramics.

The biggest difference between natural gas stoves and ordinary stoves is that they have more firepower than ordinary stoves, which is suitable for families who like to stir-fry and cook quickly, or for commercial places such as large hotels, canteens and restaurants. The ordinary stove is only suitable for the family, and the energy consumption of the fierce stove is also greater than that of the ordinary stove.