What should I do if there is water in the display interface of the Apple mobile phone

Hello Apple mobile phone display interface If there is water, we use a hair dryer to dry it, and then go to the after-sales service to test it after drying to see if there is a problem.

What should I do if there is water in the display interface of the Apple mobile phoneIt is best not to use it, and take the phone to Apple after-sales service for testing and repair as soon as possible.

It may be because your excuse is that it is wetter or something else, so it is advisable to use something dry to try your connector.

Hello landlord, if it shows that there is water in the interface, it is recommended that you check the interface to see if there is really water, if there is no water, it should be a problem with the mobile phone.

I think if there is water in the display interface of the Apple phone, you can restart it.

The Apple mobile phone shows that there is water in the interface, it should be that the air is relatively humid, resulting in water in the interface, and he controls it to dry it with a hair dryer and then use it.

If there is water in the display interface, it is best to check it to see if there is really water, if not, it may be that there is something wrong with your phone, and it is best to repair it.

Kang Ruijun: How can you look good if you have saliva, and if you have water, you must wipe it dry before you can get it.

Then turn it off temporarily, then rinse the water with air drying or use a hair dryer to dry it and then try to turn it on.

The Apple mobile phone shows that there is water in the interface, and this can be left to dry in a ventilated place for a day.

What if there is water in the phone's display port, you can remove it.

Take iphone11, ios13 system as an example, when the apple mobile phone is charging, it prompts that the lightning interface detects liquid and cannot be charged, which may be due to the accidental water ingress of the mobile phone charging interface, or the air humidity.

Large, slowly accumulating water vapor within the interface, which can be solved by the following methods:

1. Turn the mobile phone interface down, gently pat the mobile phone with your hand to drain the liquid in the mobile phone, and then put the mobile phone in a ventilated and dry place to dry for a day, and then try to charge it.

2. Wipe the charging port with a cotton swab or paper towel to clean up the dust and water vapor before charging.

3. Turn off the blind phone and restart it.

4. If you confirm that the mobile phone is not flooded, you can use a hair dryer to open a low gear and blow the interface a little, and you can recover, if the mobile phone is flooded, it will be hidden and not suitable for using a hair dryer, which will blow the water into the mobile phone and damage the motherboard hardware.

5. If it really doesn't work, you can only send the mobile phone to the after-sales test to see if there is a problem, and then repair it.

Summary. If your iPhone doesn't get water, but it shows that there is liquid on the connector, it could be due to the following reasons:1

Your phone may have been used in a humid environment, such as a restroom, a dull room, etc. 2.Your phone may be surrounded by fog, such as cold air or air conditioning when in use.

In either case, this situation should not be ignored and requires timely measures to be taken to ensure the proper use of your phone.

If your iPhone does not have water in the branch, but the interface is displayed with liquid, it may be due to the following reasons:1Your phone may have been violently used in a humid environment, such as a restroom, a dull room, etc.

2.Your phone wheels may be surrounded by fog, such as cold air or air conditioners when in use. In either case, this situation should not be ignored and requires timely measures to be taken to ensure the proper use of your phone.

The Apple mobile phone hall has never been flooded, but the display interface has liquid, and the following is a solution that can be tried earlier by pure volts:1Check if your phone has stopped working, and if it is, never try to turn it on or charge it.

2.To clean your phone connector gently, you can use a dry cotton swab or a soft cloth to gently wipe the connector, making sure not to let it come into contact with liquids. 3.

If the problem persists, it is recommended that you contact Apple customer service immediately for more detailed guidance and assistance.

Apple's iPhone prompts that there is liquid in the charging interface, which means that there is liquid in the gold finger area of the mobile phone's data interface or data cable. It is recommended to unplug the data cable or accessories connected to the mobile phone immediately, and drain the remaining liquid with the mobile phone interface facing downward; Use an absorbent object such as a dry paper towel or cotton swab to absorb the residual liquid in the port, and leave the phone in a ventilated position for 5 10 minutes.

Precautions for charging Apple mobile phones.

1. When using an Apple mobile phone, the new mobile phone does not follow the rules of how many hours it is fully charged for the first time, nor does it follow the rules of recharging after the first charge is exhausted.

2. In order to ensure the charging speed of the mobile phone, it is not recommended that users charge the mobile phone while playing.

1. The prompt is a protection mode added by Apple to iOS 12 and newer versions of the system device, indicating that there is liquid in your data interface or data cable, or it may be caused by the current humid environment; 2. When the prompt appears, it is recommended to unplug the connected data cable or accessory immediately, drain the remaining liquid with the iPhone interface facing downward, and ensure that there is no liquid in the plug of the data cable and accessory; 3. You can also use dry paper towels and cotton swabs and other absorbent objects to absorb the liquid in the interface, and put the iPhone in the ventilation position for 5 10 minutes to wait for the liquid to drain before use.

It's not a question, it just prompted me, I clicked on the emergency exception, and then I can flush it, and now it's plugged in, and it's not prompted, and now it's okay to flush.

I would like to ask that emergency notification is turned on in ** and now it is not notified to answer no, it is better to follow this to check it. 1. The prompt is a protection mode added by Apple to iOS 12 and newer versions of the system device, indicating that there is liquid in your data interface or data cable, or it may be caused by the current humid environment; 2. When the prompt appears, it is recommended to unplug the connected data cable or accessory immediately, drain the remaining liquid with the iPhone interface facing downward, and ensure that there is no liquid in the plug of the data cable and accessory; 3. You can also use dry paper towels and cotton swabs and other absorbent objects to absorb the liquid in the interface, and put the iPhone in the ventilation position for 5 10 minutes to wait for the liquid to drain before use.

It means that if you need it urgently, you can click it, but the phone is still wet

Question: How do you turn that prompt on?

Question: Okay, then will my charging have an impact on the phone?

When this prompt appears, it is recommended to unplug the cable or accessory connected to the iPhone immediately, drain the remaining liquid with the iPhone connector facing down, and make sure that there is no liquid in the plug and finger part of the cable and accessory.

If this alert appears every time you connect a cable or accessory, the cable or accessory might be damaged. This prompt may also appear if you are using a third-party charging accessory.

Precautions for mobile phone charging.

Faster charging when powered off: The easiest way to turn off your phone is to avoid unnecessary battery usage by running programs or using network information. Of course, this method is suitable for users who do not need to receive incoming calls or text messages for the time being.

Charging in airplane mode: In airplane mode, there is no need for network signals, avoiding unnecessary battery consumption, which can improve the charging speed to a certain extent. When charging in this way, the phone will not be able to receive incoming calls and text messages normally. Users need to be aware of this.

The above content refers to People's Daily Online-ios 10 says that the charging interface has liquid iPhone7 waterproof?

If there is water in this interface when you look at it, don't charge it, first unplug the electricity, it is easy to cause the situation of the soul hall, so you still have to pay attention to it.

If there is water on the charging port of the iPhone, you should use a hair dryer to dry it before using it. Do not connect the charger if there is water.

There is water in the charging warning interface of the Apple mobile phone, and at this time you can use a hair dryer to blow it dry the water inside, or dry it.

If this situation occurs, you must pay attention to it, this situation cannot be used, which will cause a short circuit and have certain safety hazards.

When the mobile phone is charging, it prompts a warning interface when there is water, do not continue charging, and wait until the water is dry before charging.

You can use a hair dryer to dry your water and then charge it, otherwise it will damage your ** and your charger, and then you can also take it to the sun and expose it to the sun, which may be stuffy.

Then you'd better not charge it, otherwise it will cause you to be electrocuted, and this risk suggests that you wipe the socket dry on it.

In this regard, you must not let it ban burning water, this can be combined into a short circuit of the human circuit, so you must pay attention to this aspect.

This may be because your phone is too wet, so the interface part can be wiped dry with water.

What's going on with water and water on the charging warning interface of my mobile phone, then don't charge it to see if there is something wrong with the charger or something wrong with the battery?

If there is water in the interface, it is recommended that you clean it with a cotton swab, and the Boran cannot be charged.

It can be dried or wiped dry with a paper towel or hair dryer.

The warning of the iPhone charger means that the excuse cannot touch the water.

Apple is waterproof, IP68 rated according to IEC 60529, up to 6 meters of water for up to 30 minutes, and protected against accidental spills of common liquids such as soda, beer, coffee, tea, and juices.

What to do if the iPhone gets into the water.

1. When the iPhone falls into the water, get it out of the water as quickly as possible.

2. Turn off your iPhone immediately, once your iPhone falls into water or gets into water, please disconnect it immediately, because the damage to your phone is often not caused by the water itself, but because of the short circuit of the internal components triggered by the water, or even further lead to the burning out of the components or the battery**.

3. Dry your iPhone with a cloth, as dry as possible, you can wipe the screen, sides and back with a cloth or absorbent material, pay special attention to the power buttons, volume buttons, mute switches, speakers, microphone and audio output jack, and try to wipe all the visible moisture to the naked eye.

4. After drying the Apple phone, if the motherboard does not enter much water, it should be able to turn on at this time, if you are not at ease, it is recommended to put the open iPhone in a ventilated place for 24 hours and then install the battery and try to turn it on.

The Apple phone is not flooded, but there is liquid in the charging port when charging, it may be a false alarm of the mobile phone system, and the mobile phone system needs to be updated to solve it, the specific steps are as follows:

Tools: iphone12, settings.

1. Open [Settings] on your phone.

2. In the settings, click [General].

3. In the general area, click [Software Silver Code Update].

The solution to the water ingress of the Apple charging port1. Use a cotton cloth or lint-free cloth to dry the iPhone charging hole and lightning charging head.

2. The lightning charging connection of the iPhone is facing downward, gently pat or swing it with your hand, and the water stored in the lightning interface will be thrown out first.

3. Use a fan to aim at the iPhone charging hole and blow directly to accelerate drying.

4. Put your iPhone in a ventilated and dry place (such as next to a desk, cabinet, or dehumidifier), and it needs to be left for at least 1 day before it can dry.

Apple didn't touch the water, and it always showed that there was water at the charging port: there was liquid at the charging port Because the mobile phone has a humidity detection, it must be humid nearby. 1. If there is liquid when the phone is charging, then unplug the charging cable and do not charge the phone until it is completely dry.

2. You can try to turn the charging port of the mobile phone downwards and gently pat it to try to remove the liquid in the mobile phone, or put the mobile phone in a dry and ventilated place. Apple has added this reminder for iPhone XS series, iPhone XR, and later models to prevent charging from affecting cables and devices in this case. Additional Information:

Precautions for water ingress in mobile phones: Some mobile phones can be turned on and used normally after simple treatment, but mobile phones are composed of precision electronic components, and there is a hidden risk after water ingress. So it is recommended not to try to boot it.

During the after-sales repair process, data may be lost, it is recommended to ask the work disturbance personnel how to back up the data.