What should I do if the iPhone can t be opened, what should I do if the Apple phone software can t b

1. Press and hold the sound button and the on/off key at the same time, wait patiently for a few seconds or a minute, and then you can turn on the device.

2. Charge some mobile phones with a charging cable, wait patiently for a few seconds or a minute, and you can turn it on.

If the above two methods can't solve the problem of black screen and rebooting, then it means that the phone is faulty and has to be sent to the after-sales service for repair, or it is necessary to find a special repair mobile phone store and send it to it for repair.

Generally speaking, the time for the mobile phone to be sent to the after-sales service is relatively slow, as little as a week, more than half a month or a month, but the advantage is that it is relatively cheap, if it is free of charge within the warranty time. And the shop you find to repair your mobile phone, the repair time will be faster, and you can get the repaired mobile phone on the same day or the next day, but it may be slightly more expensive.

Method 1: Press and hold the home and power buttons at the same time for 10 seconds, if you see the apple is too slow, you have to start again, then release the power button and continue to press and hold home for 5 seconds, if you see connect to iTunes, it is a failure, and you have to start again. If the screen does not light up after these 2 steps, it will enter DFU mode, and then you can use iTunes or other flashing software to restore or re-flash the computer.

Method 2: If method 1 is invalid, you can try to connect to the computer, the first step is to use the "restart" function in PP assistant, itools and other tools, if it is successful, congratulations, if it is not successful, you can proceed to the next step.

Method 3: Flash! You can restore the firmware through an assistant or an official one.

Method 4: First of all, you can dial Apple Technology** "400-627-2273", and after dialing, go directly to the topic, and ask what should I do if the iphone6 plus can't be turned on? Follow the staff's instructions to fix your phone.

Method 5: Users can go directly to the Apple after-sales store, if your phone is under warranty, the staff can help you fix this problem for free, or replace the phone. If it is not within the warranty period, then the specific charging method and repair method need to be further understood.

The reasons why the iPhone software can't be opened are as follows:

3. The network condition of games that need to be played over the Internet is not very good, which may also lead to flashbacks.

4. First of all, when the software on the Apple mobile phone can't be opened, first turn off the mobile phone and restart it, and then see if the software on it can be opened.

5. If it is caused by flashback, then you need to use some software with flashback repair function to fix it.

6. Take a look at whether the software has been updated, and update the software to see.

7. It may also be because of the problems caused by you on some Apple third-party application platforms**, usually in an acre of orange some apples third** software is most likely to cause this problem or boy, as long as the software that cannot be opened is deleted, and then in iTunes or directly on the Apple mobile phone APP.

8. It may also be caused by the problem of the software itself, don't care about it after a while to see if it can be opened.

9. If the phone has iTunes or iCloudIf you have a backup application, then restore the backup data via iTunes by clicking on the "Restore Backup" button. Then see if the software can be opened.

Under normal circumstances, the iPhone will not turn on, and it is very likely that the battery has run out of power. Judging whether this is the case is very simple, long press the power button, if the iPhone does not turn on but displays a low Bibi scattered battery icon on the screen, it means that the power is exhausted, and you only need to plug in the charger to charge.

However, the iPhone is also different from other mobile phones, it is not that it can be turned on after plugging in the charger after the battery is empty. If you drain all the battery of your iPhone, then you need to charge it to 5% before it can turn on normally.

If you are sure that the current battery of your phone is sufficient, but it cannot be turned on normally, there may be a problem with the software system of your phone. At this time, we can try to press the "Home and Power" button of the mobile phone at the same time until the screen is lit up and there is a display.

If the above operation method does not work, at this time we can also connect the phone to the power supply, and then press the power and home button on the home screen at the same time to see if it can be turned back on.

If none of the above works, that's the worst possible outcome – something is wrong with your iPhone's hardware. In this case, it is still recommended to send your iPhone to an official store for repair.