Nest beater is one of the important auxiliary tools of anglers, how to choose a nest beater when fis

Tennis balls are surface nest beaters, and they can't sink to the bottom! The use of a long rod to send the nest material into the black nest to place the water surface nest machine will automatically turn down, this tennis nest machine is suitable for shallow water nesting, preferably within 1 meter 5, the heavier the water, the greater the nest material from the water surface to the underwater range, the actual effect of the fish will be reduced, and the fish are also very separated! When the water flows, the nest material will drift away from the black nest along the current, resulting in no fish on the water surface, and the nest material in the water has drifted away!

The water sinking iron clamp is suitable for nesting in the water, it can be opened in each water barrier, just gradually put it into the fishing position, half of the water or sink down, just gently lift up, the iron clamp will brake the system on! The iron clamp is also not suitable for water flow applications, and the water flow is very easy to dissolve the iron clip!

The tipping bucket nest beater is suitable for sinking down to make a nest, it can be stabilized on the fishing line, and it sinks down to make a nest when there is a current, and the tipping bucket nest beater has a strong resistance to water flow, and it is generally not easy to dissolve in the water.

Boat fishing is not always effective, and the best timing must be mastered. The first opportunity is to nest after the middle fish, especially when encountering a school of fish, such as sea bass and catfish and other fish that like to gather for food, just catch a fish, it means that there are fish around, and can attract fish by nesting; The second opportunity is in the middle of the tide and the ebb tide, a tide of fish, when the tide rises again, the fish will go with the tide to find food, and the role of attracting fish after nesting is generally more obvious.

Boat fishing nest must choose a good position, otherwise no matter how much is the nest material is all consumed, no matter how good the nest material, the standard of luring fish is relatively limited, and there are many fish around the fishing position. There are three key options for the address of boat fishing and nesting, one is the area where the reef and reefs are all over, so it is all the hiding place of some demersal fish in the reef area; Second, the part where the fish mostly emerge from the sea level, and there are usually schools of fish below; If there are a lot of seagulls in the air in a certain area, it means that there must be a lot of freshwater fish in the water, and they can nest and fish here.

When nesting in this kind of area, the angler can subconsciously carry out fishing, and it is easy to grasp whether it is a nest, and it is generally very easy to catch fish in the area, which is also suitable for nesting, and when the fish is slow, the angler should moderately carry out the nest.

When choosing a nest beater, you should choose one that can be nested for a long time. This will be of very good quality and not prone to breakdowns. You can choose Obest and Halmaiwei, their ** is relatively high, but the performance is very good.

The longer the work can be done, the better the quality, and the less likely it is to malfunction when nesting.

To make a nest bucket, a nest spoon, a shrimp shovel, buy Antarctic shrimp and nest material is generally a shrimp brick with a package of powder, put it in the nest bucket with a shrimp shovel and stir evenly, add appropriate seawater, adjust to the position where you can grasp the nest, and then use the nest spoon to put it into the place where you want to make a nest, and the nest should look at the water flow to hit, generally hit in front of the stream, so that the nest material floats for a distance, so that you can better attract fish.

A nesting bucket, a nesting spoon, a shrimp shovel, Antarctic shrimp, nest powder.

Buy Antarctic shrimp and nest material is generally a shrimp brick with a bag of powder, put it in the nest bucket with a shrimp shovel and stir evenly, add appropriate seawater, adjust to the position where you can grasp the clump, and then use the nest spoon to put it into the place where you want to make a nest.

As long as you are not fishing for fish in the upper to medium water barrier, then no matter what kind of nest material is used, it must sink underwater, which can have a good attraction. Pond mud, in fact, is the underwater soil around the fishing position, which mixes pond mud and nest material together, whether it is granular bait, powder bait, or even live bait.

Wrapping the pond mud, kneading the lump, and throwing the mud ball into the water is much better than the effect of throwing the nest by hand in terms of its attraction effect. However, this kind of method also has a relatively big drawback, that is, when the nest is mended, the movement is too big, and it is very easy to scatter the fish, so when fishing for big fish, the use of loose stalls is all 2 meters away from the original nest to make a new nest again, and the effect will be stronger.

Put the nest material on the paper towel, and then use three or five layers of paper towels to wrap the nest material several times, and then throw it to the den, so that the actual operation, the nest material can also be more concentrated around the den. After the paper towel enters the water, it will dissolve quickly, so be sure to encapsulate multiple layers of paper towels. This kind of method, like using pond mud with nest material, is also very dynamic, but it is not very easy to smell.

Therefore, you can use paper towels to tie a little smaller confetti, wrap seven or eight bags at a time, and then roll them together with each other, so that the movement of throwing into the water is particularly small, whether it is a nest or a nest, the movement is not very large.

This is a way of nesting that originates from competitive fishing, and it is not uncommon to use it to catch big fish, but many fishing enthusiasts use it to nest and find that this kind of nesting method is very easy to offend the fish. Due to the lead belt nest, the loose gun nest is commonly used. In fact, change the idea, you can open a small group of bait, no need to be very large, more than half the size of an egg, after doing it, first pinch a small pinch of bait, and then dip the nest material on the bait, and then use it to draw the bait, the effect is very good.

The bait is soft and sticky, and the effect of absorbing the granular bait is very good, whether it is wine rice or wheat bran, it has a very good adhesion effect, but after entering the water, it will fall off quickly due to the moisture absorption of the bait. This kind of way to draw the nest, the bait of the den is actually and virtually, the key is that the movement is not big, the landing point of the nest material is very accurate, and there is no need to worry about scattering the fish. Whether it is the beginning of the nest, or the supplemental nest, the continuation of the nest, the effect is very good.

In the process of wild fishing, it is very important to find the right position when digging the nest and hail ridge, and it should be matched with suitable bait. In this way, you can continue to attract fish.

It is necessary to choose the right nest material, pay attention to the surrounding environment, and choose a suitable place for nesting.

To choose the right bait, so that you can better carry out nesting, you need to pay attention to the choice of location.

Pluck two handfuls of grass, tie them in the middle with a rope, find another stone or brick, bundle them with the grass with a rope, and put them in the water to become a grass nest, a half-floating grass nest and a full floating grass nest.

In areas with dense aquatic weeds, drain water to pull out a patch of aquatic weeds at a predetermined fishing spot, and use this nest as the center to step out several passages in all directions. Cast more bait in the main nest, or less bait in the channel to guide the fish into the main nest.

Use a special funnel-shaped nesting can to make a nest, and each can contains 50 grams of millet. This type of nesting is very delicate, and it is stipulated that the bait must be sent to the nest. This method is most suitable for long-rod fishing, because the long-rod is hooked accurately.

It is a method of using large jars, and each jar can hold up to 250 grams of bait. When fishing with a split multi-section hand rod, you can change to a stiff rod tip with a large tank dedicated to nesting, and pour the bait into the reserved fishing spot.

This is generally a nesting method used when fishing in large water surfaces such as reservoirs. When it is baited, some high-quality and inexpensive, but the effect is good, such as wine troughs and tofu residues, etc., and the amount is very large each time.

Key applications of grains, such as bran cake, soybean cake, bran, rapeseed cake, rice, millet, flour, cornmeal, mixed feed, etc. It has a good effect on crucian carp, carp, grass carp, bream, etc.

Nests made of animal bait, such as chicken blood, chicken intestines, pig lungs, pig bones, sheep liver, etc. The meat nest has the best effect on carnivorous fish species such as catfish, snakehead and yellow catfish, and it also has a good effect on omnivorous fish species such as crucian carp and carp.

It is best to use stinky bait, such as animal feces, rotten piglets, plague chickens, stinky meat, lazy bones, etc., and it is best to wrap it into a small bag with iron yarn or rags, wrap it with a rope, and throw it on the fishing spot, which has an excellent effect on carnivorous and omnivorous fish species.

Sprinkle fragrant bait, such as wine rice, wine tank, fried soybean flour, fried sesame powder, sesame oil, etc., on the den, which has a good effect on crucian carp, carp, bream, etc.

Stir the soil with substances that can emit a strong smell, such as spices, koji wine, sesame oil, etc., knead them into a ball and throw them into the fishing spot, or you can use a small amount of bait to mix the soil to make a nest. These litters have only flavor but no or very little bait to eat.

Nesting can usually be divided into two forms, one is pre-nesting and the other is immediate nesting. Pre-nesting is generally done 1-3 days before the start of fishing, at a fixed point selected, according to the size of the water, a sufficient amount of bait is placed. Instant nesting is to play after you go, and you don't need to play in advance.

Nesting usually has fixed-point nesting, raising nests and gathering fish. Hook fishing combined and so on. Different staining methods should be decided according to different fishing conditions. Raising nests and gathering fish is mainly used when fishing in reservoirs, large rivers and lakes.

There are rod casting, rowing bait, hand throwing, all kinds of bait in paste, granular, etc., all to increase efficiency.

The usage of the automatic fishing nest machine is: when using, fill the coke bottle with bait and hang a small wire hook on the handle. The line on the handle of the hook is connected to the rod.

Send the nest beater with the bait to the fishing point, loosen the line, the small iron hook will fall off the handle, lift the rod slightly, drive the thick line on the cover, the nest beater will be overturned, the bait will fall into the fishing point, and the nesting will be completed skillfully. With this homemade nesting device, the bait can be hit on the water to make it sink slowly, or the bait can be nested directly at the bottom of the water. The difference lies in the speed at which the water is vented on the Coke bottle and the length of time it takes to be fed.

In the reservoir or pond with a relatively large water surface for leisure wild fishing, due to the wide water and scarce fish, the vast majority of anglers attach great importance to "nesting". The nest beater is used to put the zepiwang bait into the fishing spot to quickly attract the fish to the sun.

Grains include many grains, such as bud rice, rice, wheat, peanuts, millet, soybeans and so on. The price of grain nest material is relatively cheap, and there is no need to do too much processing when it is used, and it can be applied after fermentation after cooking. Generally, the nesting with large grains is to catch big fish, such as reservoir fishing herring, grass carp, carp, etc., the most used is corn, boil the old corn, and then put some yeast to wrap it for two or three days, and can also be used to hang hook as bait, in many levels some products nest material is not as good as it.

Grassy vegetables, which are pure green plants, can also be used for nesting, but be targeted, as not all fish species like to eat grass in the water. Generally, grass nesting is used to catch grass carp or bream, the method is to tie fresh green vegetables or vegetables into bundles, and then tie a heavier stone, and promote it to the nest to let it sink to the bottom. When using, you can sprinkle two handfuls of old corn in the den, so that the nesting effect is better.

Cake bait nesting has always been very popular, it plays a good role in retaining fish, many friends play overnight nest like to use cake bait to nest. Cake bait includes: soybean cake, peanut cake, bran cake, rapeseed cake, etc., which are the residues left after oil extraction, which are ground into hard blocks with equipment.

Cake bait is also often used as a lattice bait for the sea rod copy hook, which atomizes slowly in the water, and has a very strong fragrance itself, and can also be ground into powder with other bait for bait application, crucian carp, carp, grass carp, rohu, etc. are very fond of eating. When nesting, take a few pieces and throw them directly into the nest, and you can keep it for a day without making up the nest.

The key to carnivorous fish species, such as pond fish, catfish, tilapia, herring, etc., is generally mostly snails, shrimps, animal offal, etc. These materials don't need to be processed too much, like fishing for herring, snails are very good to nest, sprinkle a few catties of snails into the nest to get it. It is easier to find one or two pig lungs, or chicken and duck intestines, which can be cut into several pieces when they are big, and the pig lungs will generally float on the surface of the water.

When making a nest, be sure to choose according to some actual conditions to see if there are traces left by previous anglers. You can choose a bait with a strong fishy smell or a bait with alcohol.

How is it good to go wild fishing? There is also a homemade nesting device, which is more accurate and easier to catch fish!

Fishing nesting is a practice that every angler knows, and has a very important role, especially for fishing some relatively large reservoirs, ponds, etc., the fish body is relatively scarce, at this time the nest can be a good fish together, but also save a lot of time for fishing. At present, in addition to sprinkling by hand, nesting often uses nest beaters, so how to use nest beaters? Follow this article to find out.

Usage of the nest beater.

The nest beater used for wild fishing, due to the relatively long rod for fishing, has an automatic nesting boat and a nesting shovel. In particular, the nest shovel is very commonly used in leisure wild fishing, the specific need to choose the distance of the hit according to their own strength, the use method is very simple, is to use the shovel to take the appropriate amount of nest material (such as corn, size particles, loose bait, etc.) and then raise the hand to throw, far can be thrown more than ten meters, near throwing five or six meters is no problem, through repeated practice can be a good grasp of the throwing distance.

The above is the analysis of the use of the nest beater in this article, and mainly explains the use of the nest shovel, I hope to help you fishing friends.