How to make the wifi signal up, how to boost the wifi signal

The wireless signal at home is slow, try this trick to improve by more than half.

The wifi signal at home is poor, teach you a trick, and the signal will increase several times.

Set the IP address of the A router, as well as enable the DHCP server and set the DHCP CIDR block.

Wireless routers are most afraid of metal obstructions, so it is best to ensure that there are no metal objects around the router and in the middle of the router, secondly, too many obstructions are also easy to cause signal weakening, so you can try to open the door of the room, another point, do not put it near the TV, refrigerator and washing machine, these large appliances are particularly large in signal interference when running, if you can, replace a high-power wireless router, or use the kind of three antennas, or, you can use WDS wireless bridge multiple routers.

Sometimes it may be that the router's wifi channel is set to be incommonly used, or the channel is interfered with by other signals, you can try to change to another channel, and it may not be another device, or it may be a problem with the phone itself. For example, other mobile phones may have a good signal in this position, and the most important thing is that the wireless router should be placed in an open high place without metal objects and obstacles.

Prepare all the materials according to the instructions written in the tool.

Clean and dry the can first, then use a utility knife and scissors to cut the bottom of the can, cut it neatly, and then use scissors to cut the edge key neatly so as not to prick your fingers, and cut it down from the middle of the can body as shown in the figure.

At this time, you will find that the can is very metallic, because the original elasticity is rolled up, now what we have to do is to make the metal of the can body not to roll it too much, let it relax as much as possible, just like a radar, with your hand from the opposite direction of the metal roll of the can body several times or straighten the metal of the can body to find a heavy object to press on it for a while.

Step to read. 5. When the tension is almost relaxed, then use scissors to cut the four corners of the metal of the can body as smooth as possible, not so sharp, in case we scratch our hands during the operation, as shown in the figure.

<> Wifi Signal Booster Usage Steps:

1. Put the booster temporarily in a position very close to the main router, and then turn on the power, at this time the booster will send out a separate wifi signal without a password, the default wifi name can be viewed in the bottom label of the booster, click on the wifi settings on the mobile phone, find this wifi direct connection, of course, the laptop can also be connected.

2. Then use the browser to enter the wifi settings interface, and you can also see the default login domain name of the default login enhancer behind the router.

3. Then set an enhancer login password according to the setup wizard, and you can set the same login password as the main router, which is easy to remember.

4. Then the wifi signal booster will automatically scan the surrounding wifi, find the wifi name of your main router, and enter the wifi password.

5. Then it will prompt that the connection is successful, and then you can place the booster to the position where you need to enhance the wifi signal, of course, it can't be too far away from the main router, which will cause the wifi signal of the booster to be unstable, showing that although the wifi is full, the network speed is very slow, and if it is too close, there will be no function of the booster, so install the wifi signal booster in the middle of the original router and the original signal poor area, so that there is basically no problem, and the signal can be continued. Internet speed is also guaranteed.

1. Don't put the router in the corner of the house. The WiFi signal will be weakened by half through the wall, but many families will choose to put the router in the corner of the room in order to save space or to avoid being in the way, which is the least desirable.

2. Try to place the router at a relatively high place in your home. Of course, the premise is that it must be stable, otherwise there is a risk of falling and injuring people. We all know that the signal is the fastest to be transmitted from high to low, and the speed of the water flow is the same, and it will not be hindered by too many obstacles when coming down from a high place.

3. Keep the router away from the wall. The reason is the same as the first one, in addition to avoiding the corners of the wall, if you can, try to stay away from any wall, and place it in the living room**, the wall is the culprit that obstructs the signal.

5. Check whether it has been rubbed into the net. Now there are too many software to crack the wireless network, and if we accidentally crack the password next door, there are more people rubbing the Internet, and our own speed will naturally decline. How to prevent rubbing nets?

First of all, you need to set a more complex password, a simple numeric password is easy to crack; Secondly, open the official website of the router, generally speaking, enter our account and password to make relevant settings, mainly check whether the name of the computer being connected, IP address and hardware address are consistent, if there is any inconsistency, that is someone is rubbing the network, speed change the password. The following figure shows how to view the details.

6. Use 360 router butler to prevent being rubbed into the network.

The wifi signal at home is poor, teach you a trick, and the signal will increase several times.

1 Update your WiFi device.

Updated the wireless router that can only work in the frequency band to a wireless router that can work in the 5GHz band.

2 Set the best channel.

Take the TP-Link router as an example, log in to the management page of the router, click "Wireless Settings" > "Basic Settings" according to the actual situation of the router, select another better channel, and change the default channel.

3 Adjust the position.

1) A central location in the home.

Generally speaking, the spatial distance from all parts of the home is relatively even, which is conducive to receiving signals (2) and staying away from interfering devices.

The router should be kept away from microwave ovens, televisions, computers, glass products, metal products and other equipment that interferes with signals (3) Reasonable placement of antennas.

Take the TP-Link router as an example, log in to the management page of the router, select "Wireless Settings" or "Wireless Settings 5GHz" >>Host Status" according to the actual situation of the router, and query the host status of the wireless router.

5. Install auxiliary equipment.

Cut off one end of the can, then cut it from the middle, and put it on the router to amplify the signal several times.

The wifi signal at home is poor, teach you a trick, and the signal will increase several times.

The wireless signal at home is slow, try this trick to improve by more than half.

The advantage of having wifi signal amplifier is cheap, the disadvantage is that it is far away, and there is also an advantage of power cats that are paired and used under the same meter, which only needs to be installed in places where the Internet is often accessed, and the disadvantage is that it is expensive.

Here's how you can boost your WiFi signal:

1. Update your WiFi device.

2. Set the best channel:

1) Log in to the router's management page;

2) Click "Basic Settings", change the "Default Channel", and select another better channel.

3. Adjust the position:

1) A central location in the home.

2) Keep away from interfering equipment;

3) Reasonable placement of antennas.

Fourth, prevent the outside from rubbing the net.

Fifth, the installation of auxiliary settings.