Furniture decoration, is the furniture bought ready made or handmade?

Home decoration cabinets must be well done, as for ready-made ones, it is not recommended to buy. Here's why:

Nowadays, the general space in houses is limited, so it is inevitable to use the space as much as possible for home renovation. From this point of view, it is certainly the best choice for cabinets, and ready-made cabinets will certainly not be the right size, which will affect the aesthetics and waste space. However, ready-made cabinets are suitable for families who are in a hurry to move in and have a short budget, so that they can be used for emergencies and are convenient for future transformation.

Next, there are two situations for making cabinets, one is woodworking on-site production, and the other is customized processing. There has been a lot of debate in the market about which of these two methods is better.

What I want to say is that any comparison must be based on the same conditions in order to reach an objective conclusion. Just like a boxing match, it's not a heavyweight opponent to decide an objective victory.

In life, most people will think that woodworking will be cheaper than processing customization, is this really the case? The answer is no. Let's first calculate the cost of the two methods in the case of the same plate.

The labor cost of woodworking to make and process a board is about 150 yuan, while the processing fee of the processing plant is mostly about 80 yuan, and the installation fee is about 60 yuan. Other hardware materials are ignored.

There are two main reasons why we think that carpentry is cheaper to make on site:

Clause. First, when everyone compares, they often just listen to the price, and the cabinet materials, labor costs, accessories, and hardware made on site are purchased separately, which sounds cheaper than customized one-time ones.

Clause. Second, most processing plants will falsely report or overstate the plate accessories, of course, the utilization rate of customized plates is generally lower than that of on-site production, so the cost is slightly higher.

The space utilization rate of on-site production is higher than that of customized processing;

On-site production is more intuitive and transparent in the use of materials;

The treatment of the junction between the cabinet and the wall foundation made on site is better than that of customized processing;

Due to the good treatment of the edge banding, the sensory effect and moisture-proof effect of the board are better than those made on site.

In short, whether it is customized processing or on-site carpentry production, the final effect depends on the quality of the board and the craftsmanship level of the construction personnel. Therefore, a good plate and a good process can produce good results.

I think you should choose to buy ready-made, and it is better to buy ready-made now, and it is particularly good-looking and very convenient.

When decorating your home, you should choose hand-made furniture, hand-made furniture, will be selected according to your decoration style and size, so that it will be more beautiful and more practical.

When decorating furniture, it is necessary to make furniture by hand, so that it will be made according to your own decoration style, and it will be more convenient and more beautiful.

The carpentry is sturdy, and the style I bought is more beautiful. Whether to hire a carpenter to do it, or to buy the finished product, this mainly depends on your personal needs.

1. From the point of view of sturdiness, the furniture made of carpentry is definitely a little more solid than the furniture bought, and the shape may be slightly less fashionable. But the all-solid wood furniture will definitely be more durable, ** will be slightly more expensive, after all, the current labor cost, board cost is not cheap.

2. From the point of view of appearance, the furniture you buy, all kinds of plates, all kinds of styles, will be a lot more fashionable, and a lot of shapes and colors. It is the carpenter who is completely independent at home.

Nowadays, it is relatively rare to use carpentry to beat furniture, in fact, it is not cheap, and the labor cost and board cost are not cheap. Ask a carpenter to make it, not to mention the pain, painstaking and laborious work, from buying materials to supervising the production, it will break your heart. If you don't pay attention to the oil, it is easy to produce harmful gases such as formaldehyde.

The finished product, furniture brands, furniture types, you can choose, whether it is from the color, style, material or **, you can follow your own heart to choose, more selective, but also fashionable enough.

Of course, it does not mean that the furniture made by carpentry is not good, if you have enough funds and energy, it is also a good choice to choose woodworking. After all, the furniture made by carpentry will be more solid, and the quality is still good, but it depends on the personal choice.

Bed, sofa, TV, cabinet, table, it is recommended that you buy a finished wardrobe, wardrobe if the carpentry skills are very good, you can play, and then customize, try not to buy a finished wardrobe, the size may not be suitable.

The quality of the purchase is relatively good, and the one that is made is easy to break

Ask the carpenter to do it yourself, buy the materials yourself, and it is better to pine wood, and it is hazy and high-end.

If you have the money, hire a carpenter to make solid wood furniture.

If you buy it and do it, the handiwork is not good, and there is paint, which is toxic.

Nowadays, when people choose furniture, they will choose some artificially made, or factory-made, in fact, there is a very big difference between artificially made and factory-made.

1. We can first compare the cost performance of these two production methods, if you make furniture manually, you need to buy some raw materials yourself. If you have time. It's okay, but if you're busy with work, it's not recommended to let people make furniture for your home, which will delay your own work very much.

As for the furniture made by engineering, he will make it for you according to some requirements you set. You don't have to worry about it anymore, but if you go to a factory to make furniture, you must find something bigger, and the factory is guaranteed. And the quality of the furniture he makes is also very good, so in terms of cost performance, it is better to use the furniture made by the factory than to find someone to make the home by yourself.

2. Another aspect is that from the perspective of the space and utilization degree of the two furniture-making furniture, the artificially made furniture has a very large degree of space utilization for furniture. Especially like some of the shapes in some furniture and its slope, the inside is very good, and the space utilization of the furniture made by the factory is very small, and it will also have some deviations.

Therefore, if you compare the space and utilization of furniture made in a factory with that of a home, artificially made furniture is better. Because he is a little more elaborate than the furniture made in the factory.

3. When the furniture is made manually, it is carried out in your own home, and if you are not satisfied, you can make some modifications at any time. But if you make it in your own home, there will be a lot of pollution and noise, and then the furniture made by the factory, generally they are used to use some, the machine to complete the production, the machine must be faster than the manual production, the accuracy is higher, like some edge banding is very good. In general, there is no mistake.

Therefore, there are advantages and disadvantages in the artificial production of furniture and factory production, if you are usually too busy, it is not recommended to use manual production.

The quality of artificially made furniture will be better, and it will be more affordable, and the most important thing is that the style will be more exquisite.

Factory customization is better, factory customization is better to do unions, edge banding will be better, and it looks more beautiful.

The furniture must be handmade. If you spray paint manually, you can also choose to spray less, because this will cause a little harm to the human body.

A small cabinet for shoes can be made by the decorator with a wooden plank, as well as a wardrobe for clothes, bookshelves, and hangers, so that the decorator can make it stronger and more practical than the one you buy.

The bed can be made by a carpenter, and the cabinet can be made of wood or can be made by a carpenter, provided that you provide wood to the carpenter, like some wine cabinets, you can also ask a carpenter to build.

The TV cabinet can be built according to the size of the TV you buy and other required functions. Wardrobe can be customized by carpenters according to different needs. The same goes for the cabinets in the kitchen, which can be customized to your storage preferences.

Whether it is custom furniture or find carpentry to make furniture, you need to come according to your own preferences, if you pay attention to beauty, coordination, you can go to the furniture city to buy a complete set of matching, but to consider whether the size of each position in the home can be placed, if you can, you can consider buying a complete set of finished custom furniture. If you want to make better use of the space, you can go and call a carpenter to design it yourself, so that there will be no waste of space at all.

In fact, there are their own advantages and disadvantages, if you are financially affluent, it is recommended that you go to the furniture factory to book when decorating. Because although the carpentry is cheap, it is not beautiful to buy, and the effect is not as good as the one when it comes to painting. And although the finished custom furniture you buy looks good and the paint effect is good, it can't form a whole with the room type.

And customized solid wood furniture is a good neutralization of the shortcomings of finished custom furniture.

From the point of view of appearance, the furniture I bought has all kinds of plates, and many shapes and colors cannot be made at home by woodworkers. But now rarely use carpentry to hit furniture, the first ** is actually not cheap, labor costs are expensive, the board is also expensive, if the oil will also produce formaldehyde and other harmful gases, the furniture bought is just a little bit stronger, and everything else is good.

Let the furniture factory customize the technical level a little higher, after all, it is a professional; Find a carpenter to do it yourself, and the material may be more assured, but the process will definitely not reach the manufacturer's production.

All of them are made of wood, which is more natural and environmentally friendly, and can make the whole home reveal a natural and original beauty. Solid wood furniture has been prosperous for a long time, and there is basically no need to worry about the problem of elimination. The service life of solid wood furniture is also relatively long, generally able to last for three or five years, and even longer if it is well maintained.

Placing solid wood furniture in your home can make the environment look more elegant and tasteful. Solid wood furniture also has a certain degree of value retention, retaining the original pattern and texture of the wood, which can make the furniture look more beautiful and exquisite.

But solid wood furniture also has a lot of disadvantagesThe biggest disadvantage is that maintenance is very difficult。Because it is solid wood furniture, it is easy to be corroded by moisture, and once it is corroded, subsequent maintenance becomes very difficult.

Solid wood furniture is also particularly afraid of open flames, if a large number of solid wood furniture is placed at home, then we must pay attention to electricity and fire safety.

Some people like to lay wooden floors at home, and they must wring out the mop when mopping the floor, otherwise the floor will easily crack and deform after coming into contact with water. After a few years, you have to pry off all the floors and replace them with new ones.

And solid wood furniture should be polished and waxed frequently, otherwise it will have no gloss after a long time and look old. Another disadvantage of solid wood furniture is that it is easy to deformIf exposed to high temperatures, it will crack after a while.

If the bedroom uses floor-to-ceiling windows, the curtains should be closed at all times, otherwise the sunlight will shine through the floor-to-ceiling windows, and the furniture will deform and crack over time.

Therefore, all the furniture at home is replaced with solid wood, there are good and bad, and solid wood furniture is relatively expensive, you can decide according to your actual situation, you can not simply say good or bad.

It's good from an environmental point of view, and if it's solid wood, you don't have to worry about damage or anything like that.

I think it's very good, but the wood products are easy to lose luster for a long time, and they are easy to deform when exposed to sunlight, so its maintenance is still very laborious.

It's not good, the wooden ones look old and don't look good.

I don't recommend this, first of all, general wooden furniture ** is more expensive, and he also needs a certain amount of maintenance.

This should depend on whether the personal needs and the overall decoration style match.

It's fine if you don't have the kind of wood-eating bugs in your home, but wooden homes can be heavier.

The style of woodwork is more suitable for the elderly, and if you are young, you may not like this style very much.