How can you tell if it s a beam when decorating a new home? How to crack the beam pressing?

When installing a new house, you must ask the developer for the overall drawing, if it is a beam top, you can carry out the ceiling, so that it can be well cracked.

Whether the beam should be knocked off, I do not recommend knocking it off in this case. Because every beam that happens in the house is useful, all of them are loaded, and it is not easy for real estate developers to do useless work, and the beam is different from the wall, and his existence has a certain importance. What's more, even if the house type of house is decorated, even if the ceiling is decorated, this beam also has a function of distinguishing the region, and there is no need to dismantle it.

To dismantle the interior walls and beams, the following aspects need to be paid attention to, load-bearing beams, and beams, can not be dismantled, and the counterweight wall of the balcony cannot be dismantled, <>

How to judge the load-bearing beam, the thickness of the general load-bearing wall is about 27 cm, that is, 24 walls, plus the thickness of concrete. The size of hollow bricks varies, but most of the loads are basically thick walls. What should we do if we can't dismantle it?

Find a service-oriented designer, use the parts of the beam, make a tailor-made modeling ceiling, ensure the safety of the overall structure of the house, and make a sufficient feature of home decoration, each home is unique, that is also the infinite charm of customization. The beams can not be knocked off, to be thoughtful, commercial and residential buildings are distinguished according to the relative height of the floor, the level of bearing capacity, and <>

Knock out just does not hinder the artistic aesthetics of decorative design, in order to be able to decorate the decorative design can go to other specific ways to decorate, knock down to understand the mood of the people living in this building, if you accidentally be knocked down by the downstairs neighbor saw him, then the whole building is knocked down, it will become a dangerous house! When people want to make their houses their own characteristics and beauty, they can't forget the word safety!

Usually when we decorate a new home, we will have a beam, and in terms of the decoration design of the beam, there are always some economic matters in feng shui, which requires us to judge the position of the beam. The easiest way to judge the position of the beam is to look at the protrusion, and the position of the protrusion is generally the beam. If you encounter the situation that the beam is pressed on the top, some methods can be used to crack it when decorating, such as Taishan stone solution, stone statue solution, plant solution, etc.

When the new house is renovated, the people from the decoration company will judge whether it is a beam or not, and then they will issue you with renderings and a design plan.

Beams are generally long protrusions on the roof, and such places are generally beams. And the beams are pressed on the top.

The best way to crack this is to weaken the beam as much as possible.

Introduction: Now there are many people who do not need beams to press the roof when decorating the living room, which is also not to give people a depressing feeling, if this pattern is used in the living room, the designer may not know how to deal with it. Some people will think that if there is a partition, it will give people the feeling of two spaces, so most people are not willing to use such a design, so if you want to hide it more simply, let the partition and the ceiling merge.

If you can hide the beams in the ceiling, it will look very small. Nowadays, many people will not set up suspended ceilings anymore, and if they want to make their houses taller, they will give people a very light feeling at most, so if you choose to go to a designer, then don't always listen to the old people in the family talk about some feng shui problems. Some people may not be able to analyze it for you, but if this practice needs to be changed, then there may be a part of the styling that will also take your floor height into account.

Many people will also take a look at the overall layout if they are decorating, but if you are unhappy with buying a house and living in it, it will also lead to a change in your family's financial fortune. Some people will ask whether the fake beam ceiling is considered a beam roof, in fact, it also depends on some design problems at that time. <>

If you grew up next to the elderly, then the houses in the countryside will have such a shape. In the process of living room decoration, you don't let yourself have a lot of taboos, you have to properly upgrade some things, don't always talk about superstition, then this is not good for decorating the house. House decoration is actually not an easy thing, if you want to crack it in time, then you must also find your own suitable way.

It's fun to buy a house, but you can't just be excited about it.

This is because if the decoration beam is pressed on the roof, there is a certain pressure on the structure of the house, and now people pay more and more attention to the accuracy and safety between the house structures.

Mainly because the buildings are now made of reinforced concrete, there is no need to add beams, which is completely cumbersome.

This is because the buildings are now filled with concrete, so there is no need to add beams to reinforce the floor slabs.

First of all, because the building now uses reinforced concrete mechanisms, there is no need to add beams, which is completely burdensome.

This is because the buildings are now irrigated with concrete, so there is no need to add beams to reinforce the floor slabs.

Summary. Hello, is this decoration considered a beam press?

Please send ** over to answer for you.

Does this decoration count as a beam top?

Hello, is this decoration considered a beam press? Please send ** over to answer for you.

Same as this one.

This is not a beam, dear, this is very normal.

The beam is pressed into the top as shown in the figure below:

The so-called beam pressing the top refers to the place where people sit and lie down, and the top of the head is exactly the beam, which is called "beam pressing the top". Living room, study, bedroom, these people spend a lot of time at home, only these places have beams that will be problematic. Others, such as the entrance, the beam at the door are not counted.

The scientific principle of beam pressingIn fact, the beam pressing on the top is only psychological oppression, and the beam is prone to the feeling of heavy body, so that people sleeping under the beam will feel great pressure because of the psychological shadow, which will cause insomnia and poor sleep.

So as long as you let go of your mood, or do some small decorations, add a suspended ceiling or change the layout of the bedroom, and change the position of the bed, so that your heart will not be hit by the crooked winds of the beams, and there will be no more insomnia and a series of problems.

[Feng Shui dissolves evil] the most taboo "beam pressing the top" of the house, how to resolve it?

The so-called beam pressing is a piece of the roof protruding from the beam on the indoor roof, and the bottom should be in the bed, sofa, sofa, dining table, desk seat and other places where there are people.

This is not good in feng shui, it is easy to make people feel oppressed in the subconscious, they can't sleep well, and they are prone to nightmares.

It has some adverse effects on the human mental system, and in serious cases, it will cause personality deviations and produce autism.

If the occupants rest or work there for a long time, the beams will be pressed on the top, causing physical pain.

Solution: Hang a gourd on the beam or between the two beams, you can resolve the disadvantages of the beam pressing the top.

First, the treatment of beams in the decoration of new houses can take the method of combining beams and columns with lighting, integrating a variety of elements, and reasonable design, which can turn disadvantages into advantages. In the living room, unsightly beams and columns will also be a headache for people. If you want to "cover", in fact, there are not many of them, as long as they are deliberately designed to be symmetrical, or directly wrap the beams and columns in indirect lighting, forming a design shape of equal height on all sides, so that it will not look too abrupt.

Second, the solution of the house beam:

1. Separate the space under the upper shield beam.

In the design of the ceiling, a large arc can be used to weaken the beams with indirect lighting, so that the whole living room space looks tall and bright, and also allows different fields to have the most suitable conversion zone.

2. Indirect lighting increases the sense of hierarchy.

In the space decoration, through the design of indirect lighting, the visual beams in the living room space can be reduced, and the privacy effect of the white film glass behind the mirror wall can be multiplied, supplemented by the elevated design, which can also change the space with different functions.

3. Integrate a variety of design elements.

If you don't want the living room ceiling to be too monotonous, then you can use glass, mirrors and other elements to add a sense of fashion, such as the black acrylic carved totem, which can add points to the living room space.

1.If there are beams in the house, it is better to decorate it and remove it, so that you can't see it. 2.As for the fact that there is a bathroom in the bedroom, it is difficult for you to make a judgment without the direction of the house and the floor plan.

First, it is the best choice to deal with it when decorating.

From a professional point of view, if there are beams in the home, it is best to deal with them when decorating. In the process of decoration, the homeowner decorates the beams, such as installing false ceilings, so that the beams are basically invisible on the appearance, which may minimize the harm.

2. Try to avoid the bed, sofa, coffee table, dining table, etc.

Some homeowners don't know the feng shui hazards of the beam pressing on the roof, and fail to adjust it when decorating, so they have to avoid it as much as possible in the position, even if they can't avoid it completely, they should try to avoid it.

3. Use some vigorous plants to relieve the evil atmosphere of the beam pressing on the top.

You can also put one or two pots of vigorous plants on the coffee table and dining table, and use the vigorous vitality of the plants to relieve the evil atmosphere of the beam.

Fourth, the mascot five emperor money has a certain dissolving effect on the top of the beam.

The Five Emperor Coins condense the rui qi of the prosperous era, which can add auspicious air to the living room and block evil for the occupants.

Fifth, use a gourd to dissolve.

In feng shui, the gourd plays the role of curing diseases and collecting evil qi, go to the craft store to buy a few decorative vines with gourds and wrap them around it, which is not only beautiful but also dissolves the evil qi of the beam pressing on the top.

Sixth, place the stone elephant to crack.

Seventh, use Taishan stone to solve.

Place a piece of Taishan stone on the south side, or a square mirror to reflect the beam of the house, to dissolve.