Wardrobe and bed, panel furniture is better to combine board and wood or full density board?

Hello, now the overall wardrobe trend and market mainstream is.

The floor board is solid wood particle board.

The backplane is MDF.

They have their own merits, please look down.

MDF is also known as MDF, the full name is MDF, which is made of wood fiber or other plant fibers.

It is a kind of person made by crushing, fiber separation, drying and applying urea-formaldehyde resin or other suitable adhesives, and then hot pressing.

Plate making. Advantages: The material is relatively fine, and the cutting surface will be sealed well when the edge is sealed, so that it is not easy to open the glue. It is easy to press into various shapes and make shapes, so there are usually more door panels or back panels.

Disadvantages: The substrate is a powder-based raw material, and more glue is used than particle board, which is more likely to cause environmental problems. Secondly, due to.

The glue content of MDF is more, the internal structure space is less, and the moisture resistance is poor, so soak a piece of density in water for 24 hours, more than ten.

After an hour, it was obvious that the four sides of the MDF were warped and deformed.

Solid wood particle board, a scrap made of wood or other lignocellulosic material, is applied with an adhesive under heat and pressure.

Wood-based panels synthesized with glue. The principle is the same as that of MDF.

Advantages: 1. The inside of the solid wood particle board is granular with a cross and staggered structure. Therefore, the nail holding force is good, and you can nail round nails and screws.

Nail. These machinability properties are significantly better than MDF.

In the use of adhesives, the content of solid wood particle board is generally less than 5%, and the environmental protection is better than that of MDF.

3. The warping deformation of solid wood particle board is small, the dimensional stability is good, the strength is high, and the hardness is good.

The wood-based panels used in other furniture markets, such as Europe, are mainly solid wood particle boards.

Disadvantages: The flatness of solid wood particle board is not as good as that of MDF, and it is more difficult to do modeling.

At present, in the European market, from the perspective of environmental protection, most of them are based on solid wood particle boards, and domestic manufacturers are among them.

Most manufacturers also use solid wood particle board as the base material of the cabinet.

In one wardrobe, it's best if you use both. MDF is used for the back panel, and solid wood pellets are used for the outer side panel and laminate.

board, which can not only take advantage of the good flatness of MDF, but also take advantage of the environmental protection advantages of solid wood particle board.

Of course, it's good for the wood.

The problem of deformation depends on what kind of wood is used for the main frame. Like elm, it is easy to deform!

Good solid wood Welcome to consult African yellow pear mahogany bed.

Modern home decoration will use a lot of materials, such as ceramic tiles, cement, plates, etc., with the gradual enhancement of environmental awareness, in the selection of plates will choose environmentally friendly plates. So what is the raw material of environmentally friendly board? Dawang coconut plate to tell you the answer.

What is the raw material of environmentally friendly board?

1. Solid wood plank.

What is the raw material of environmentally friendly board? The first is solid wood panels, which are one of the most common eco-friendly home panels, made of finished wood. Solid wood panels are characterized by being durable, sturdy, and the grain of the wood is very natural, making it possible to make high-quality furniture.

However, the cost of solid wood panels is relatively high, and the requirements for the process are also high, and many people are more difficult to bear the high cost.

2. Density sheet.

What is the raw material of environmentally friendly board? The second is MDF, another name is fiberboard, which is a kind of wood-based panel, which is made of wood fibers and other fibers, plus adhesives. According to the different densities, this kind of board is divided into high, medium and low density boards, and the MDF material is relatively soft, easy to process, and relatively cheap.

Panel furniture: refers to the furniture made of multi-layer solid wood board or MDF or particleboard for surface veneer, etc., which has the advantages of easy disassembly, diverse design, and not easy to deform. Due to the affordability of panel furniture, panel furniture has been favored by most consumers.

The performance of multi-layer solid wood board is better than that of MDF, and it is more moisture-resistant. It's just that it's relatively high. The so-called penny is worth the goods, and the poor quality will be broken after a long time. Now developed areas are basically using this kind of board to make cabinet panels.

MDF has very good flatness and is an ideal material for making a facing base board, but it is afraid of moisture, and it is very easy to mildew and deformation when damp, and it is cheaper than multi-layer boards.

Medium density fiberboard (MDF)) is a board made of wood fiber or other plant fibers as raw materials, prepared by fibers, applied with synthetic resin, and pressed under the conditions of heating and pressure [1].

According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard. Among them, the nominal density of MDF fiberboard ranges from 650 kg m to 800 kg m [1].

Due to its uniform structure, fine material, stable performance, impact resistance, and easy processing, MDF is widely used in domestic furniture, decoration, musical instruments and packaging.

Key Benefits: 1. MDF is easy to finish. All kinds of coatings and paints can be evenly coated on the MDF, which is the preferred substrate for paint effect.

2. MDF is also a beautiful decorative board.

3. All kinds of veneer, printing paper, PVC, adhesive film, melamine-impregnated paper and light metal sheet and other materials can be finished on the surface of MDF.

4. The hard density board can be punched and drilled, and can also be made into sound-absorbing boards, which are used in the decoration of buildings.

5. Excellent physical properties, uniform material, no dehydration problem.

Main disadvantages: 1. The biggest disadvantage of MDF is that it is not moisture-proof, and it swells when it sees water. When using MDF as baseboards, door cover boards, and window sill boards, you should pay attention to painting on all sides, so that they will not be deformed.

2. The expansion rate of MDF when exposed to water is large, the deformation is large, and the long-term load-bearing deformation is larger than that of homogeneous solid wood particle board.

Although the moisture resistance of MDF is poor, the surface of MDF is smooth and flat, the material is fine, the performance is stable, the edge is firm, and it is easy to shape, which avoids problems such as decay and insect moth. It is superior to particleboard in terms of flexural strength and impact strength, and the decorative properties of the surface of the board are excellent, especially compared to the appearance of solid wood furniture.

3. The nail holding force of MDF is poor, and the nail holding force of MDF is much worse than that of solid wood board and particle board because the fiber of MDF is very broken.

The advantage of general solid wood particle board is that the amount of adhesive is very small, which means that its environmental protection is very good, it is compared with the real solid wood board, the board surface is wide, the appearance is smooth and smooth, there are no knots, insect eyes and anisotropy and other shortcomings, no warping, no cracking, high physical and mechanical strength, longitudinal and transverse strength, sound insulation, mildew prevention, economy, heat preservation, etc. However, when it comes to wardrobes, multi-layer solid wood boards are better, because the area of multi-layer board bonding is less than that of solid wood particle board, and its environmental protection level can reach E1.

It is good to feel it with multi-layered solid wood board. Although the multi-layer solid wood board is higher than the first grade of the MDF, the solid wood is reliable, there is no pungent smell in the house, less glue is used, and the formaldehyde is relatively less, and the damage to the body is minimized. Moreover, the multi-layer solid wood board has good moisture resistance, good structural stability, and beautiful appearance.

It's up to you to choose, my master bedroom wardrobe is made of solid wood boards of king coconut, and the second bedroom is made of their paint-free boards, but to be honest, I still prefer paint-free boards, and I may feel that the colors are more beautiful.

The use of MDF is good, the MDF is lighter, the moisture-proof effect is better than that of multi-layer board, and the multi-layer board is easy to deform.

It must be good for solid wood, environmental protection of solid wood, less glue used, of course, less formaldehyde, but with MDF, it depends on what kind of MDF you use, some MDF is made of that kind of broken wood with glue, but there is also a kind of solid wood wood particle board, which is larger than that kind of broken wood, and in terms of precursors, the wood of solid wood wood particle board is also better than that kind of wood, and it has more advantages than MDF in terms of wedge, if you do it yourself, it should be made of solid wood board, customized from the dealer, Generally, it is MDF, mainly depending on the selection of materials, and you can set it yourself

Choose the right board for wardrobe, but also according to the characteristics of the board.

The performance of multi-layer solid wood board is better than that of MDF, and moisture-proof, that is, slightly higher, and now many large, medium and small cities are basically using multi-layer solid wood board to make cabinet boards.

Although the flatness of MDF is very good, it can be used as a facing base board, but it is more afraid of moisture, and it is easy to mildew and deformation when damp.

Therefore, if you are making a wardrobe, it is better to choose multi-layer solid wood boards that are more durable.

Multi-layer solid wood has a better waterproof effect than MDF.

Eco-board veneered with a triangle board.

Most of them use ecological boards, about 160 per piece.

If it were me, I would definitely choose solid wood boards.

It is not recommended that you use multi-layer boards, the glue is too heavy, not pure solid wood, the merchant will show you the environmental protection grade, it is too fake, it is recommended that you use imported Ousong board or particle board.

Solid wood wardrobe.

The density of solid wood particle board is higher, the wood fiber particles in the board are larger, and more retains the essence of natural wood, the content of solid wood particle board is generally less than 5% in the use of adhesive, and the environmental protection is good, the warping and deformation of solid wood particle board is small, the dimensional stability is good, the strength is high, the stiffness is good, and it is not easy to bend when hanging heavy clothes. At present, the wood-based panels used in the European furniture market are mainly solid wood particle boards.

The glue content of the MDF is more, the internal structure space is less, the moisture resistance is poor, a piece of density is soaked in water for 24 hours, and after more than ten hours, it is obvious that the four sides of the MDF are warped and deformed.

Precautions for the maintenance of solid wood wardrobes.

Regular cleaning of solid wood furniture surfaces; The surface of solid wood furniture is coated with paint, and the maintenance and maintenance of its paint film is particularly important, once the paint film is damaged, it will not only affect the appearance, but also further affect the internal structure of the product. Therefore, the furniture should be kept clean at all times.

Wax solid wood furniture regularly; Protects furniture lacquer and wood, forming a protective film on the surface of furniture. Regular waxing not only maintains the wooden furniture, but also increases its brightness, and it is not possible to decontaminate the solid wood furniture with chemical solvents; If there are stains on the surface of furniture, do not rub them vigorously, and do not use chemical solvents to remove the stains.

The panels of the solid wood wardrobe are made of real wood panels, which simply means that the wood has not been modified. MDF wardrobe panels are made of MDF, and the surface is pasted with melamine pattern paper. The utilization rate of solid wood planks for wood is not high, and the wood is not fast-growing, and the growth is relatively slow, so it is high.

MDF, also known as fiberboard, is made of fast-growing wood, arboriculture and other objects soaked in water by hot grinding, paving, and hot pressing, and is made of wood fiber or other plant fibers as raw materials, and applied urea-formaldehyde resin or other applicable adhesives. According to its different amounts, it is divided into high-density board, medium-density board, and low-density board. Because MDF uses glue in the production process, there will be a slight formaldehyde release.

Of course, MDF improves the utilization rate of wood, so it will be a lot of poop. . .

However, in order to respond to the call for energy conservation and emission reduction, it is recommended to use MDF wardrobes. . . .

Both boards have their own advantages, and you can learn about multi-layer solid wood boards in terms of environmental protection, moisture-proof, load-bearing and nail holding strength. A good multi-layer solid wood board is expensive enough to be more expensive than grass board, MDF and particle board, but the retail price is not expensive.

Solid wood wardrobes are more environmentally friendly, but the number is small, the most expensive, the color is less, and the board type is less. MDF is created when solid wood wardrobes are in short supply.

Solid wood is divided into many kinds of solid wood, finger joints are also solid wood boards, and woodworking boards are also solid wood boards that are pasted and pressed layer by layer. Trees are made directly into craft boards, which are also solid wood. It depends on what kind of solid wood you use.

Under the relative thickness, the hardness of MDF is not worse than that of solid wood, and if it can be guaranteed to be within the range of the national standard, then there is no pollution to the environment. There are many types of MDF boards, and some rare wood textures are also available.

The cabinet is basically recommended to use MDF, also known as particle board, the cabinet door is of course made of solid wood, not a grade, but you don't understand, and the solid wood wardrobe can only sit on the door wardrobe, can not do sliding doors are also called sliding doors.

The disadvantage is that it is easy to deform, not deformed.

MDF can be made of very fine solid wood material, especially pay attention not to absorb water, or just report, but the durability is poor.

When decorating a wardrobe, which is better, solid wood particle board or MDF? Fitment; Huizhou decoration; renovation companies; Villa; villa decoration; Type; small apartment; interior design; decoration style; Decoration renderings; Toilet; Balcony; Living room; Bedchamber; Kitchen; New Chinese Style; Modern minimalism; Light luxury style.

MDF is a board of different thicknesses composed of sawdust glue and pressure, which is divided into medium density and high density according to different densities, which belongs to wood-based panels. The board is not as strong as solid wood, and it is more afraid of bumps. The furniture is assembled with connectors, and do not disassemble it after assembly, disassembling and assembling destroys the vacancy and reduces the strength.

Composite board is a thin plate with glue and pressure to form a board of different thicknesses, and furniture is also assembled using connectors, which has better nail holding force than MDF.

Both kinds of plates contain glue, and there are some problems with environmental protection. If it is strong, it is recommended to have a composite board.