How to put the software on the USB flash drive through otg

1.Please check whether the phone model supports OTG.

2.Use an OTG cable to connect your phone to the USB flash drive.

3.Go to My Files - All Files - sdcard0 - Find the folder that needs to be moved - Press and hold and don't let go - Move to (if you don't have this menu, please click the menu key - Move) - Return to the USB flash drive storage space - Click "Move here". Vice versa.

1.Please check whether the phone model supports OTG.

2.Use an OTG cable to connect your phone to the USB flash drive.

3.Go to My Files - All Files - sdcard0 - Find the folder that needs to be moved - Press and hold and don't let go - Move to (if you don't have this menu, please click the menu key - Move) - Return to the USB flash drive storage space - Click "Move here". Vice versa.

Material tools.

OTG connector mobile phone USB flash drive.

Here's how. 1. First of all, buy an OTG adapter cable, as shown in the figure below

<>3. Open the file manager after access, and you can see the storage with OTG, as shown in the figure below

4. Then open the folder where the phone file is located, press and hold the file selection, and then click Copy.

5. Then open the folder where the USB flash drive is located and click on the "Paste" option.

6. Then wait for the progress bar to be read.

Generally, it is not supported to go directly to the U disk through OTG**, it is recommended to create a new folder in the mobile phone file management first, and then open the file storage path of the **software, select the folder you just created, wait for it to be good, and then open the mobile phone file management, and move the files of the new folder to the U disk. It needs to be mentioned that,If you choose the ** path to support the selection of U disk, then choose,If you don't support it, just do it according to my method above。

Mobile phone file management page.

Hello, I'm glad for your question, if you want to go from the mobile phone ** file to the USB flash drive, you can follow the steps below to operate:1Plug the two segments of the OTG cable into the mobile phone and USB flash drive respectively.

2.The phone shows that the storage device is being prepared. 3.

Open the file management, find the corresponding USB flash drive storage device, and you can copy and paste freely, note that the mobile phone needs to support the OTG function.

First connect the USB flash drive to the OTG adapter device, and then insert it into the tail plug of the mobile phone, and the mobile phone will be connected to the USB flash drive.

After the USB flash drive is connected to the phone, click the file manager on the main interface of the phone, where you can see the files in the USB flash drive or the phone's storage space.

Click on the USB flash drive tab, and then you can follow the date in the timeline to find the files on the USB flash drive or other external devices. Once you find the file, click on the file icon and the file will be opened. However, you need to install the corresponding software in the mobile phone, so that you can open it, otherwise some files may not be opened.

1. First of all, prepare all OTG data cables, plug one end of the OTG cable into the mobile phone, and connect the other end to the U disk.

2. After connecting, turn on the phoneSettingsInterface.

3. Turn on your phoneSettings

, and then click againotg

5. After clicking the OTG, open the wrecking button behind the OTG.

<>6. After opening the button behind the OTG, open the notification interface of the phone, and you will see that under the system interface, there is an OTG connected, clickOTG is connected.

7. After clicking on the OTG connection, we can see that the data on the USB flash drive is trembling, at this time, we can copy the data on the USB flash drive to the mobile phone, and at the same time, we can also copy or cut the data on the mobile phone to the USB flash drive. Click the back button on the top left of the OTG interface to read the remaining corner.

8. Click on the return to health in the upper left corner of the OTG interface, we can see the phone storage and OTG (that is, the U disk folder), open these two folders, you can transfer data to each other, open a file in the mobile phone casually, after opening, click the copy or cut at the bottom of the mobile phone page.

<>9. Click Copy or Cut at the bottom of the phone page, then click the OTG file (that is, the USB flash drive folder), and then click Paste at the bottom right of the phone screen.

Go to Settings--Other Networks and Connections More Settings--Turn on the OTG switch, connect one end of the OTG cable to the charging port of the vertical device, and then connect the mouse, USB flash drive or other external devices to the other end to use.

Note: If you do not use it for more than 5 minutes, the OTG will be automatically turned off.

Some devices (such as mobile hard disks) have high power supply requirements, and the power supply of the equipment may not be able to meet the requirements.

There are many brands and types of external devices on the market, so it is recommended to test and use them before purchasing.

The steps to format the USB flash drive connected to the OTG on the mobile phone are as follows:

3. Click to format the USB flash drive of the mobile phone.

Hello, 1, the mobile phone does not have this function, so it is not possible to format the USB flash drive.

2. It is recommended that you go to the computer for formatting. Method, plug the USB flash drive to the computer, turn on the computer, right-click on the removable disk icon, format A, and start.

Hello, the USB flash drive is connected to the smartphone, that is not to be formatted.

If you need to format it, you need to operate it on the computer, otherwise it may cause problems with the USB flash drive.

The mobile phone can only format the TF card, not the U disk.