Who will build a tunnel kiln, and how much will a tunnel kiln with a daily output of 80,000 yuan be

Tunnel kilns with an annual output of 30 million standard bricks require an interchange surface between 3 meters and meters. The energy consumption is up to tons per 10,000 standard bricks, such as burning hollow bricks, and the coal consumption per 10,000 standard bricks is tons, and the operation mode is semi-automatic or manual. It is recommended to use a tunnel kiln with a vault or a hanging vault at the top and a brick-concrete structure with a side wall, so that the cost is relatively low.

In the local structure below the sintered brick tunnel kiln probe brick, the selection of materials can not be the same, including the temperature zone material selection to be treated differently, can adapt to the standard type can not choose special-shaped, can adapt to the general can not choose high-grade, can adapt to the ordinary clay bricks can not choose high-alumina refractory bricks, can not be purchased nearby.

Investors' funds should be used in combination with their own needs, reasonable use of funds, can not be blindly chosen, greedy for foreign, must calculate the cost of investment, production costs, sales costs, enterprises are dependent on profit and survival, not by decoration and furnishings. The distance between the entry of raw materials and the selected address of the factory should be shortened, rather than a single consideration. Now there are many enterprises in this problem there is a lot of repeated investment, should use local materials, reduce the repeated input of raw materials, save production investment costs.

It's not coherent, I hope it helps you.

Specializing in the construction of brick and tile tunnel kilns and wheel kilns.

The daily output of 80,000 can be made into a one-baking and one-burning tunnel kiln, with an investment of about 2.5 million to 2.8 million.

Specializing in the construction of tunnel kilns with a daily output of 80,000 to 90,000 yuan, it will probably require an investment of about 2.6 million.

This question is too general, first of all, we need to know where to build, secondly, we need to know what object to be fired, what temperature to reach, what fuel to use, and finally, whether there is a plant, these are all things to consider, and they have a lot to do! Agree!

Professional casting tunnel kiln car under the plate·· Cast steel wheels.

800-12 million We can provide relevant technical advice and services to absolutely save money and let you do the most with the least money.

I guess it's always blocking what I post.

Hello, we're already friends.

Tunnel kiln, industrial box furnace, muffle furnace, continuous annealing furnace, tunnel kiln, glass melting kiln, refractory tunnel kiln, environmental protection building materials device firing area kiln body temperature measuring element, currently using S-type thermocouple, direct contact with the medium (furnace hot atmosphere temperature), the temperature in the furnace is usually controlled at about 750-1650, the temperature can reach more than 1200-1700 when the working condition is abnormal, coupled with the influence of high temperature atmosphere erosion, the frequency of thermocouple burning loss is high, the average life is about 15 days, and the fault is serious, Thermocouples need to be replaced frequently throughout the year, and the cost is high. Stabilize production to ensure product quality, reduce the frequency of maintenance, and reduce the operation risk of maintenance personnel. After on-site analysis, data collection, and many demonstrations and simulation experiments, combined with on-site working conditions, a non-contact temperature measuring instrument was tailor-made.

This instrument can not only accurately monitor the temperature in the furnace, reduce the operation risk of maintenance, but also save maintenance costs.

Tunnel kilns, reactors, rotary kilns, hot blast furnaces and other kilns are widely used in metallurgy, building materials and other industries, and it can complete different process operations such as drying, roasting and volatilization of materials. With the different processes of the industry, the types of materials, heating methods, fuels, flame temperatures, negative pressure control conditions in the kiln are also very different, but in most cases temperature control is required, so the temperature in the kiln is a key parameter, which directly affects the output, quality and energy consumption of the product.