The technology cloth turns black when it touches the water, why does the technology cloth turn black

The blackening of the tech cloth in water can be caused by several reasons:

1.The surface of the technical cloth is penetrated by the dye: if the dye penetrates the surface of the technical cloth, it will cause the technical cloth to turn black.

2.The technical cloth material itself is delicate and dense, and it is easy to absorb fine stains and particles: if there are stains or particles remaining on the surface of the technical cloth, these substances may also cause the technical cloth to turn black.

3.Mixing of technical cloth with detergents: Some detergents may react with the coating on the surface of the technical cloth, causing the coating to discolor or damage, which can darken the technical cloth.

To avoid blackening of the technical cloth when exposed to water, it is recommended to use clean water or mild detergent when cleaning, and use a soft-bristled brush or damp towel to gently wipe it. If you need to use detergent, it is advisable to choose a cleaning product that is specially designed for technical cloth. In addition, regular replacement of new technical cloth is also an important measure to maintain its cleanliness and performance.

If the cloth has turned black, you can try to use oxidizer or bleach to clean it, but it is important to note that these chemicals should be used according to the instructions to avoid damaging the surface of the cloth. If the above methods do not work, it is recommended to seek professional cleaning services.

Here's howWashing and maintenance of technical cloth: 1. When washing technical cloth, you can buy canned spray.

Or foam sofa stain remover. Spray on a damp cloth and wipe it on.

2. It is recommended to clean up the scientific and technological cloth once a week. Pay attention to cleaning up the dirt in the voids.

3. Glue the soft cotton cloth with the soap solution and wring it out, and gently wipe the stain. Rub it a few more times. The stain will be removed. However, do not use too much force, otherwise the fabric will change color.

Summary. Hello dear, the question you asked about the technology cloth turns black when it encounters water, it is very simple, I come to you: 1. If the technology cloth is stained, you can use a water-stained rag to wet it, and then wipe it on the stain, and the stain can be cleaned off.

If there is dust in the folds, it must be cleaned up in time to avoid accumulating more and more, which is difficult to deal with in the later stage.

Hello dear, the question you consulted about is very simple when the cloth turns black when it encounters water, I come to you: 1. If the technology cloth is stained, you can use a water-stained rag to wet it, and then wipe it on the stain, and the stain can be cleaned up. If there is dust in the folds, it must be cleaned and adjusted in time, so as not to accumulate more and more, and it will be difficult to deal with it in the later stage.

Secondly, a certain proportion of soapy water or dish soap can be allocated, moistened with a rag, and then wiped on the stains of the technology cloth sofa, which can effectively disintegrate the stains. If you can't wipe it off on the side, you can wipe it a few times with the base brigade in multiple towns.

In addition, if there are candy stains on the sofa, you can use an ice pack or ice water to clean up the candy. Then, use a silk cloth dipped in detergent to resist bending, wipe the area stained with candy, remove the sticky stains, and then remove it with a clean rag.

4. If there is only dust on the sofa, you can use a vacuum cleaner to clean up the dirt. If you don't have a vacuum cleaner, wipe it with a dry rag to clean it up.

Hello nuclear feast, dear! <>

Technical cloth is a high-tech material, the main components of which are synthetic materials such as microfibers and polyester fibers. Technical cloth is extremely absorbent, abrasion resistant and antibacterial, and is widely used in cleaning, wiping, care and beauty fields. However, when the cloth comes into contact with water, it will "turn black" because certain chemicals on the surface of the cloth react with the minerals in the water, causing a change in color.

Specifically, the surface of technical cloth is usually coated with a special coating or treatment that gives it a smooth, uniform appearance. This treatment agent is usually a compound containing the elements carbon and oxygen, called an oxide or oxide coating. When an oxide coating comes into contact with minerals such as calcium, magnesium, iron, manganese, etc., it forms a deposit that causes the entire surface to turn black.

In addition, the blackening of the technical cloth may also be related to other factors during use, such as the detergent used, water quality, temperature, etc. Chemicals in certain cleaners and water may also liquid or react with the coating on the surface of the technical cloth, resulting in blackening. In order to avoid the blackening of the technical cloth, it is recommended to treat and disinfect it according to the requirements of the manual before use, and use clean, softened water to clean, and avoid using detergents containing strong acids, strong alkalis and other chemical components.

In addition, avoid exposing the damp technical cloth to the air for a long time or burying it in the sun and rain to reduce the possibility of darkening. Hope mine can help you!! 