Is it okay to change the memory module when the computer is running a PR card? 200

The key point of your laptop is not the memory, okay!

Take a look at your hard drive! 128GB, and have been used for a while, why does the card appear, is caused by your hard disk problem, the SSD has been used for a long time, it will slow down, or the solid-state space capacity is bursting, and there will be jamming, so your key is not memory, it is a hard disk, it is recommended that you change to a high-speed hard disk, at least a black disk-level, puls-level, pro-level SSD, 512GB can be.

If you have a mine, you can directly go to the solid state of enterprise-grade MLC, and I hope the above can help you.

It is also possible to improve the running speed, it is recommended that you reinstall the system first, test it first, and then add a memory module.

Memory 8G is enough, it has nothing to do with memory.

Your main hard disk is 128g, I wonder if there is a secondary hard disk?

Running PR, it takes up a lot of hard disk space, I don't know if you have cleaned up the temporary files of PR?

In addition, the reason for the card may be that the hard disk has never been defragmented, and a comprehensive disk defragmentation is required at least once every half a month.

The memory required by PR will be relatively large, because you still have to run subtitles, and there are many **and**, if the memory is too small, it will take a long time, so adding memory is an effective way. Of course, if the CPU has enough speed, the effect is also obvious. In addition, if there is a good capture card at the time of collection, the speed will be much faster, in short, the performance it requires is determined by many aspects, and strive for these aspects can be improved.

Your computer configuration, the computer running card is useless to change the memory module. You need to clear the system junk, disable the system restore settings, and free up the system disk space.

Notebooks are not recommended to upgrade.

In addition, if you feel that your computer is stuck when you use it, it is recommended to use it to connect to the Starfish Cloud computer before using the high-standard software.

Not necessarily, sometimes the graphics card and network card will cause lag.

Rooting memory is still required.

It's very simple to change the memory module on the computer, as long as the model is the same, the card slot and the memory module match, just change it yourself.

Basically, it can, whether it is a desktop or a notebook, it can be replaced by using a memory slot, only a very small number of thin and light books or netbooks have memory chips that are packaged on the motherboard, and those without memory slots cannot be replaced.

1. First of all, the memory modules produced by different brands have their different advantages, such as performance, parameter specifications, etc.

2. It is recommended to choose a memory module suitable for individuals according to the actual use needs, as well as which generation of memory, main frequency, standard voltage or low voltage version, etc., plus through the comparison of physical stores or ** products;

3. It is recommended to consult the local entity dealer, or the description and specific price of the corresponding memory module in other major e-commerce companies, and make a comprehensive judgment and choice based on your own needs. As for which product is better, there is no unified standard.

Note that you must not install it with electricity, you can't do it without turning it on, you must unplug it, replace the memory, it is best to have a whole one, the two brands are the same, it is good to look at it is several generations of memory.

If you change the memory module, if you are a professional, you can buy a memory module from the Internet, and then slowly disassemble and assemble it yourself, but you must be careful in this process, otherwise the computer will be disassembled, so that the gain outweighs the loss,,, of course, if you don't understand yourself, or go to repair the computer and let someone help you replace it, which will be safer.

Yes, if there are multiple sticks, it is recommended to change to the same brand and the same size as other memory sticks to avoid problems; If it's a single bar, change it casually, but be careful not to exceed the maximum memory that the motherboard can support.

If it is a desktop computer, and you know some basic computer hardware knowledge, you can automatically operate the manual better memory module, because the desktop computer itself has the space of the main chassis, you can take the cover apart, and add a memory module on the motherboard yourself, it is best to be the same as the original model, if it is a laptop, it is better to take it to the computer repair shop to change the memory module.

The memory module can be changed by yourself, and the memory module will automatically pop up when you press the memory module lightly with two fingers, and insert the memory module into the card slot when you install it, and the automatic deduction will be buckled.

This only needs to be opened in the case, find a memory module and insert it directly, no need to change it.

OK. The back of the notebook generally has a special accessory cover, which is convenient for customers to upgrade memory modules and hard disks (generally fixed with a screw, and some even have no screws, so it is convenient for users to open them by themselves).

If you have a desktop, open the case, and the memory will be plugged into the motherboard, so you can find the right model and change it at will.

Note! Remember to disconnect the power supply before operating

You can change it, and if you want to change it, you can open the internal chassis.

Computer majors tell you that you can change it, and it's very simple. Computers are not so fragile and break when they move.

No, because it is extremely dangerous to change the memory module yourself.

As long as you have some knowledge, of course, you can, if you don't understand it very well, it is recommended that you contact someone who understands, otherwise there will be any problems, but it will be worse.

You can change it yourself, and you can remember the front and back when you plug it in.

Yes, just turn on the host and dial it out and install it again.

No, your notebook is mainly because the CPU is too weak, and it can't be replaced, only the solid-state and memory, but the improvement is not big.

CPU performance is also not very good.

Adding memory can only be said to have a little effect, and it is recommended to choose an older version.

However, the output of this configuration is estimated to be stuck and nothing else.

As long as there are free memory slots, you can buy the memory and install it.

My computer is 32G, and the memory is only 6G when rendering, and the memory of the option is first, how do I get it?

How much memory did you originally have? I have 32g of RAM and a render directly of more than 90%.

If it's infected, won't you take it for repair?

Open the main chassis, wipe the components inside, unplug the memory module and clean it up, and you should be able to return to the speed of the year.

The computer configuration is OK, the operation is slow, you need to add a 60G solid state drive, use the solid state drive as the main hard disk, reinstall the system, and then add a 4G memory module, so that the computer will run more smoothly and stable.

It's useless to add a memory module to this configuration.,Basically, it won't work.,If you want to be fast, add an SSD as a system disk alone.,The speed is definitely more than 3 times faster.。

I think it's better to add an SSD.

If you often surf the Internet and browse the BAI web page, you will leave a footprint on the hard disk of your computer.

Hello 1, the slowness caused by the mechanical hard disk is also reflected in the opening speed of some programs, which is manifested in the slow opening speed of the program, but the operation is relatively smooth after opening. To solve this problem, you need to change to an SSD hard disk, that is, an SSD.

2. After booting, it gradually slows down and freezes with more open programs, and it can get better after closing the program, which is related to the lack of memory capacity. If you want to run more programs to ensure smooth and fast operation, you can increase the memory or replace the large memory module.

There are two ways to improve your computer's speed

1. The slowness caused by the mechanical hard disk is also reflected in the opening speed of some programs, which is manifested in the slow opening speed of the program, but the operation is relatively smooth after opening. To solve this problem, you need to change to an SSD hard disk, that is, an SSD.

2. After booting, it gradually slows down and freezes with more open programs, and it can get better after closing the program, which is related to the lack of memory capacity. If you want to run more programs to ensure smooth and fast operation, you can increase the memory or replace the large memory module.

Memory is one of the most important components of a computer, and it is the bridge that communicates with the CPU. The running of all programs in the computer takes place in memory, so the performance of the memory has a very large impact on the computer. Memory, also known as internal memory, is used to temporarily store computing data in the CPU and exchange data with external memory such as hard disks.

As long as the computer is running, the CPU will transfer the data that needs to be calculated to the memory for calculation, and when the operation is completed, the CPU will send the result out, and the operation of the memory also determines the stable operation of the computer. Memory is made up of parts such as memory chips, circuit boards, gold fingers, etc.

Reasons why the computer is stuck:

1.The computer system is used for a long time and has too much redundant data;

There are too many software installed on the disk;

3.Trojan horses or viruses in your computer;

4.The memory is insufficient, and the memory required to complete your operation in a short period of time is not possible, resulting in lag. Using software such as Sensitivity Guard to optimize the cleanup can only solve the problem for a while.

Recommendations for computer cards:

1.Replace a memory module with a larger capacity or add a dual-channel memory module of the same brand and size, and reinstall the system or reinstall the anti-virus software after the full disk is formatted.

2.Start Task Manager: Press [Ctrl+Alt+del] to quickly launch Task Manager.

Note: When the computer is unresponsive, you can often press the Ctrl+Alt+Del key combination to start the task manager), in the "Application" bar under the task manager window, select the task you want to end (select the task to make the computer crash), and then click "End Task";

3.After booting up, use Guard and antivirus, and comprehensively examine the computer;

5.If the above methods do not work, press the power button of the computer to force the shutdown and back up the data, format the whole disk and reinstall the system.

It is recommended that you clean up junk files or software and uninstall some useless software.

Its computer physical examination can remove junk plug-ins for you,Dianruyu brain chain acceleration can help you clean up junk files,In addition, use Tencent PC Manager to reduce boot startup items,It can also speed up the computer。

Me too, can't seem to add too many luts

Add some memory.

SSDs can greatly improve the performance of hard disk reads and writes, but do not improve the software related to CPUs and graphics cards

Hello! This is a problem with the graphics card, and if you want to do professional 3D rendering, it is recommended to choose a professional graphics card from Litai.