What kind of engine oil is it that is ready to be the first warranty of the original factory?

The first warranty generally uses the original engine oil, but each brand uses a different one, depending on what kind of car you are, and the first warranty is made by 4S stores anyway. It can't give you bad oil, that's not a smashing sign!

The first warranty of the normal vehicle is the semi-synthetic engine oil of the original factory of the 4S shop, and the maintenance is 5000 kilometers or half a year in the later stage.

If you have a first car warranty, it is recommended that you go to a local 4S store to replace the original fully synthetic engine oil, such as Mobil, Shell, etc.

Hello, what kind of model are you talking about, generally the first warranty is free, and it is a free engine oil provided by the manufacturer.

The original factory of the first warranty is free mineral engine oil, which is the cheapest engine oil, it is recommended to add some money to replace the fully synthetic engine oil, which can better play the performance of the engine and let the engine be better protected.

This first warranty free replacement of the engine oil is the manufacturer's special engine oil. If you have this opportunity, there are no other problems with the engine that is completely suitable for you, and if you change the oil, it will be 5000km or no more than half a year to do maintenance.

The oil used for the first maintenance of the car is the oil specified by the manufacturer. The owner can use it with confidence. The oil model is different for every model. There will be no problems with the quality of the product.

Hello, this first warranty is basically naturally aspirated with mineral oil, of course, if you maintain this oil on time, it is enough.

Hello, the first warranty is generally to replace the original free engine oil.

The original engine oil is the special engine oil entrusted by the manufacturer to the lubricating oil manufacturer. There is nothing wrong with the quality of the quality.

Hello, it depends on what model and brand, and the oil sent by different manufacturers is also different.

What kind of engine oil should I use for my first warranty? What kind of engine oil should I use for my first warranty? The original engine oil is used at the time of the first warranty.

The specific content is as follows: Specific engine oil: Under normal circumstances, the first warranty of a new car uses the original engine oil, which is a brand engine oil product certified by the automobile manufacturer, which saves consumers the trouble of choosing their own engine oil.

In fact, the "original engine oil" is the engine oil products produced by the engine oil manufacturer in accordance with the requirements of the automobile manufacturer, and some are directly used brand engine oil, but the outer packaging is changed. So you first need to confirm the type and model of engine oil. If you are not satisfied with the free motor oil provided by the 4S shop, you can buy branded motor oil or add money to buy the original synthetic motor oil from the 4S shop.

Note: As long as the new car goes to the 4S store for the first warranty within the specified period, even if the follow-up maintenance is not in the 4S store, you can also enjoy the three guarantees. However, after purchasing a new car, if the user does not go to the designated 4S shop or the manufacturer's designated special repair station for the first maintenance within the specified mileage, if there is a problem with the car, the user will have to pay a certain maintenance fee even within the warranty period.

According to the SAE method, there are 6 types of oil for winter, 5 types of oil for summer, and 16 kinds of general oil for winter and summer.

Winter oil grades: OW, 5W, 10W, 15W, 20W, 25W. The symbol W represents winter, the smaller the number before W, the smaller its low temperature viscosity, the better the low temperature fluidity, and the lower the applicable minimum temperature.

Summer oil grade, 60. The higher the number, the greater its viscosity and the higher the applicable maximum temperature.

Winter and summer general oil grade: 5w w w w w The smaller the number for the winter portion and the larger the number for the summer portion, the larger the applicable temperature range.

Quality indicators. According to the API quality classification, engine oil is divided into gasoline engine oil series (i.e., S series) and diesel engine oil system (i.e., C series), and the oil products of each series are arranged in alphabetical order (A, B, C, D, E, F), and are divided into several grades, and the lower the letter ranking, the higher the grade.

Selection method. The marking on the outer packaging of engine oil currently sold on the market consists of two parts: SAE viscosity classification level and API quality classification level. It usually starts with SAE and is followed by a viscosity code; The engine oil label classified by API quality generally omits the API and directly marks the quality grade code.

For example, the designation SAE10WSD indicates a winter gasoline engine oil with a viscosity classification of SAE10W and a quality level of API SD; The designation SAE30SD indicates the viscosity classification SAE30, and the quality grade is APE SD for summer gasoline engine oil; The label is SAE10W 30SD (or SAE10W 30SD), which indicates that the viscosity classification is to meet both SAE10W and SAE30 winter and summer general purpose gasoline engine oil, and its quality grade is API SD grade.

When choosing a motor oil, fans can combine the local maximum and minimum temperatures and refer to the car's "User Manual". If you choose an oil that is too viscous, it will increase the resistance to movement and consume engine power; If you choose an oil with too little viscosity, the lubrication quality cannot be guaranteed, and it will aggravate the wear of the engine. For engines that have been seriously worn and the gaps between the fittings are large, a higher viscosity oil can be used to strengthen the sealing performance of the fittings.

Hope mine is helpful to you.

Synthetic or fully synthetic oil is recommended for naturally aspirated engine models, and fully synthetic engine oil is recommended for turbocharged engine models. The first insurance engine oil is generally provided free of charge by the 4S store, and the vast majority of new cars will be replaced for free when the first insurance of the 4S store is mineral engine oil, if you want to use synthetic engine oil, you must add some money to buy it. Here's a specific introduction to motor oil:

1.According to its chemical composition, motor oil can be divided into three types, fully synthetic and synthetic. Mineralogical type.

2.In addition to the type of engine oil, look at the engine oil model. There are usually two standards for motor oil models – SAE and API?

SAE stands for oil viscosity specification and API stands for oil quality grade.

1.Case-by-case analysis. If under warranty, use a manufacturer-authorized oil to stalk.

Because of the problem, the manufacturer cannot shirk the responsibility. Even the oil recommended by the manufacturer is tested on the bench. Therefore, try to use the engine oil provided by the manufacturer to suppress cracking.

3.All models and specifications of motor oil are one size. W is an abbreviation for Winter.

The lower the previous value, the better the low-temperature fluidity (i.e., dilution) of the oil. The number after w is the high temperature resistance index of the oil. The higher the value, the better the oil's protection against high temperatures.

4. It can resist external zero temperature, can resist external zero temperature, and can resist external zero temperature; The latter number indicates that it is resistant to high external temperatures, but it is resistant to high external temperatures. - Heat-resistant and cold-resistant than - correspondingly ** will also be expensive.

5.The first and second warranties should be replaced in accordance with the time and distance specified in the car instruction manual. At this time, or when the distance has been reached, it should be replaced.

Because the starting oil is full of metal debris, it is very harmful to the sealing device, especially for the turbine engine, and the sealing of the turbine shaft is very harmful.

I hope it helps you through this article, and this is the end of the article.

Millions of car purchase subsidies.

It is best to change the oil, filter, vehicle inspection, lubrication system and fuel system cleaning and protection after 5000km, and then replace the air grid, gasoline grid, spark plug, and then add the cleaning and protection of the gearbox after 50000km, and the cleaning and protection of the cooling system after 50000km. Sterilization and disinfection of the air-conditioning system once every six months. Benefits of motor oil:

1. Lubrication: There is a rapid relative sliding between the piston and the cylinder, between the spindle and the bearing, and an oil film needs to be established between the two sliding surfaces to prevent the parts from wearing too quickly. An oil film of sufficient thickness separates the surface of the relatively sliding part to reduce wear.

2. Cooling and cooling: the oil can bring the heat back to the oil tank and then dissipate it into the air to help the water tank cool the engine 3. Cleaning and cleaning: good oil can bring the carbide, sludge and wear metal particles on the engine parts back to the oil tank through circulation, and wash the dirt generated on the working surface of the parts through the flow of lubricating oil.

4. Sealing and leak-proof: The oil can form a sealing ring between the piston ring and the piston to reduce gas leakage and prevent external pollutants from entering. 5. Anti-rust and anti-corrosion:

Lubricating oil can absorb on the surface of parts to prevent water, air, acids and harmful gases from coming into contact with parts. 6. Shock absorption and buffering: when the pressure of the engine cylinder port rises sharply, the load on the piston, piston chips, connecting rod and crankshaft bearing is suddenly aggravated, and the load is transmitted and lubricated by the bearing, so that the impact load bears plays a buffering role.

7.Anti-wear: adding lubricant to the rubbing surface can reduce the coefficient of friction.

If needed, according to the manual, it is generally 5000 kilometers or half a year, and the mileage is less than that, calculated according to the time.

Precautions for first insurance:

1. Change the oil, oil filter, gasoline filter, and air filter.

2. Check whether the position of the liquid level of the automobile coolant meets the regulations.

3. Check the position of the liquid level of the brake and clutch.

4. Check whether the oil level of the steering power tank meets the regulations, and check whether there is oil leakage at the interface of each oil pipe of the system.

5. Check the liquid level of the battery and the liquid level of the glass cleaning agent tank.

6. Check the tightness and aging of generators, air conditioners, water pumps and booster pump belts 7. Check whether the front and rear lights of the car are complete (including: headlights, wide lights, turn signals, brake lights, reversing lights and fog lights).

The first warranty is mainly to change the engine oil and oil grid, and there is no need to change anything else, but also to check the appearance of the whole car, tire pressure, and water level.

In fact, the first warranty is just to change the engine oil. There will also be a free inspection of the entire vehicle.

Generally, new cars are free of charge, that is, free maintenance (oil change is included), and oil change is a very important job in the first warranty. In our daily use of the new car, its internal components, such as the engine, gearbox, rear axle and other gears will also be working non-stop, each new gear can not be so smooth, there will be some car marks after the lathe processing, under the mutual friction between the gears, the uneven friction between the gears will gradually be smoothed, (this process is what we often call the "run-in period"!) In this way, some iron filings will be generated, and the first oil change is to release the run-in iron filings along with the oil, so this is a very important maintenance, hope to adopt!