The ASUS laptop can t connect to the Internet, and it feels like it s a problem with the network car

You can go to the device manager to check whether the driver of the network card is normal, and if it is not normal, you can update it.

Hello, about your ASUS laptop not connected to the Internet, it feels like a network card problem, what should I do? Then since you feel that it is a problem with the network card, either you will change a network card for me, you will go directly to the repair shop or go, well, this four-s shop can change it for you and repair it for you.

TwoVisit to France:

1. Open360 Security Guard" Function Encyclopedia" Network Optimization "Disconnection First Aid Kit".

Re-Install orUpgradesnetwork card driver;

It's best to test it. If there is no test, it is difficult to say.

ASUS laptops are connected to the Internet but cannot be connected to the Internet due to router settings, network instability, network firewall problems, and computer problems.

1. Problems with router settings.

At this time, carefully check the network settings of the router, manually specify the network settings such as IP and gateway again, and unplug the network cable again and plug it in.

2. The network is unstable.

Sometimes the internet is good, sometimes it's slow. This is the case when the internet connection is very slow. At this point, you can contact the network company and ask them to help solve the problem.

3. Problems with network firewalls.

If the network firewall is not properly set, such as the security level is too high, the browser is accidentally placed in the block access list, or the firewall policy is incorrect, you can try to check the policy and reduce the security level of the firewall.

4. There is a problem with the computer.

At this time, you can use Master Lu to test the computer, and if it is more serious, you can go to the repair shop to repair it.

How to use the notebook and how to maintain it correctly:

1. In the protection of the laptop screen, the most taboo is the pressure, top, scratch and incorrect screen opening method, the LCD screen of the laptop is composed of many layers of reflectors, filters and protective films, any of which will be injured will make the display of the screen flawed.

During the process of transporting and carrying the laptop, be careful not to put the screen and top cover under pressure, which may cause the screen cable to break and the top cover to chip, which is also the most common screen damage.

2. Do not place any foreign objects between the display screen and the keyboard when closing the screen to prevent damage to the internal components.

3. Do not touch the surface of the screen with fingernails and sharp hard objects to avoid scratches. <>

There are many possibilities for not being able to access the Internet, first of all, rule out the problem of whether the router is router, and try whether the mobile phone wifi is normal if the router can access the Internet normally. If the phone is normal, the wireless of the laptop should also be usable. Click to enter the local network to see whether the IP address obtained by the wired network is normal.

Under normal circumstances, if you can't access the Internet because you can't get the IP address, you can manually set the IP address. In addition, you can also restart the system and click on the local network repair detection.

1. Right-click the network icon and select Open"Network and Internet"Settings 2, click to change adapter options, right-click to select WLAN, enable 3, if you still can't connect to WiFi, then press the win+r key combination, open run, enter, enter.

4. Find WLAN AutoConfig and double-click to enter the settings of WLAN AutoConfig.

5. Select Automatic from the startup type drop-down list, and click Apply.

Open 360 Security Guard, enter the function encyclopedia, find the first aid kit tool for network disconnection, and use it to diagnose and repair it.

1.(1) First check whether there is a problem with the ** line (you can dial a** test), if it is normal, then check whether the signal divider is connected normally (where the ** line is connected to the line port, and the ** machine is connected to the phone port.

2.(2) If the connection of the signal divider is normal, then check whether the "Power" indicator of ADSLMODEM is on, if not, check whether the ADSLMODEM power switch is turned on, external.

3.(3) If it is on, then check whether the status of the "link" indicator is normal (if it is always on, it is flashing); If not, check if the individual connecting wires of the adslmodem are working (slave to the signal divider.