How to use a temporal artery thermometer? What is a temporal artery thermometer? Can it be measured?

1. Remove the protective cap.

2. Hold the thermometer, put your thumb or index finger on the scan button, and do not press it for the time being.

3. Place the probe flat on your forehead** and press and hold the scan button.

4. Gently slide the thermometer from the middle of the forehead to the left or right to the hairline, keeping it horizontal, and in contact with ** throughout the scan for 2-3 seconds. During the process, it is normal to hear a beep and see a flashing red light, which means that the measurement is in progress.

5. When the slide reaches the hairline, release the scan button and remove the thermometer.

Read the temperature on the display.

There is only one button in the whole body of the temporal thermometer, and you only need to change it once! When you need to measure the temperature, open the protective cover first, press and hold the button (remember to hold the button), and sweep the ** from the middle of the forehead to one side of the hairline.

Release the button again and read the data! The whole process is actually very simple!

On the artery of the gun that is not regulated, I said that you can pinch it casually, and pinch the mother to ask him that it is not good, I can ask the doctor to know, how to fix it? How does it work?

Why do you want to slide it, I think the forehead thermometer is just a beep.

It's okay, it's close to the forehead at that time.

Do I have to wait for the probe to touch my forehead before I can press the button? I'm used to reaching over and holding and then scanning.

Go back to the 4th floor, because this is a measurement of the temporal artery temperature, not the forehead temperature, so you need to slide through the temporal artery where the flow is located.

A temporal artery thermometer is used to measure the temperature of the temporal artery under the skin in the forehead region.

When sweating, you can choose to take your temperature behind the ear, because perspiration causes the temporal artery surface** to decrease, and the area directly behind the earlobe has the high blood flow required for body temperature measurement when sweating, and is the part of the body that is least prone to sweating. However, this is done when there is sweating on the forehead and the blood vessels in the neck are completely dilated, and if there is no sweating, head trauma, or if you are not sure if there are blood vessels in the neck, the back of the ear cannot be used as the only temperature measurement.

The most obvious difference is that the forehead thermometer only measures the temperature of the forehead, while the temporal thermometer scans the entire temporal artery area on the forehead side. It's definitely more accurate than a forehead thermometer!

With the building, I think this is a sweep on the head, that's about the same as a forehead temperature gun, isn't it?

The temporal artery thermometer is a thermometer that measures the temperature of the surface of the temporal artery, which can be measured accurately and has passed clinical testing.

Back to the 3rd floor, in fact, the best place to measure the temperature is the center of the heart, but this can only be done under the supervision of a doctor, professionally speaking, measuring the blood temperature of the large arteries can accurately reflect the real body temperature, and the temporal artery is the closest artery to the surface.

What is the temporal artery? Why does it reflect body temperature?

The temporal artery thermometer uses advanced infrared technology to provide the fastest and most accurate measurements, and is a completely non-invasive system, thanks to its advanced patented technology, the temperature measurement only needs to be lightly swiped over the forehead, so it is convenient. Moreover, the temporal artery thermometer uses arterial thermal balance technology to calculate the error caused by the ambient temperature and blood flow, and the temperature is displayed only after compensation, which is much more accurate than the forehead thermometer.

I use this thermometer, is to see the convenience, there is a baby at home, with the commonly used armpit thermometer is not very good, stuffed in the baby is afraid of pain and will fall out, this can be measured on the forehead.

If you want to adjust the temporal artery thermometer, start with the blank display and tap the button until you have pressed the 8 temperature memories and then the F-C mode flashes. The current temperature mode will be displayed in the upper right corner of the screen, indicated by small or . Press and hold the button until the small changes to at the top right of the display.

A beep "beep" indicates that the setting has been changed and the thermometer will turn off automatically.

As soon as the buzzer ends, it will automatically turn off directly, and the gray off of the display screen means that it is closed, which is much faster than the automatic shutdown after measuring the temperature.

When the thermometer was first turned on, the default setting was Fahrenheit, which is really not used to reading.

How long does it take to turn off automatically?

When a thermometer measures temperature, it must be relatively accurate.

However, in this case, there may be a certain error in temperature measurement.

I bought a temporal thermometer, mainly because there is a baby at home, this does not need to be like a mercury thermometer or an ear thermometer, it needs to be non-stop, disturbing the baby's sleep, hehe.

！Finally able to throw away the mercury thermometer, my baby has broken three of my heavens, the national environmental protection cause, I'm sorry for you! Can I buy this temporal thermometer in China?

Back to the 4th floor, the koala is still enough to buy now, and it is very convenient to buy it directly to your home haha.

Bao Ma said that this temporal thermometer is really fragrant, and she is not afraid of ordinary temperature measurement during the epidemic, and the whole family can use it.

1) The glass bubble of the thermometer should be immersed in the liquid to be measured; Do not touch the container wall; (2) After the thermometer glass bubble is immersed in the measured liquid, wait for a while, and then read it after the thermometer is stable; (3) The glass bubble should continue to remain in the liquid to be measured during reading, and the line of sight should be level with the upper surface of the liquid column in the thermometer.

I heard that the thermometer is measured, can it reflect the body temperature? That thermometer can definitely reflect body temperature, but there is. The thermometer used in the industry will definitely not be able to measure your body temperature.

Sluggish, why do you need to measure the surface? Don't ear thermometers and mercury thermometers smell good? I'm not afraid to sweat either.

No, the temporal thermometer is different from the forehead thermometer, which measures the forehead temperature at the center of the eyebrows, which is easily affected by the ambient temperature, and the temporal thermometer does not.

The temporal artery is in the forehead, right?

Proper use of commonly used thermometers:

Before use: (1) See the range of the thermometer, judge whether it is suitable for the temperature of the object to be measured, and avoid damaging the thermometer;

2) Recognize the index value and zero scale mark of the thermometer for accurate reading.

When using: (1) the glass bubble of the thermometer is fully immersed in the liquid to be measured (that is, in full contact with the object to be measured), and do not touch the bottom of the container or the wall of the container;

2) The glass bubble of the thermometer is immersed in the liquid to be measured for a while, and the reading is made after the thermometer is stable;

3) The glass bubble of the thermometer should continue to remain in the liquid to be measured during reading, and the line of sight should be level with the upper surface of the liquid column in the thermometer.

A thermometer is a tool that can accurately judge and measure temperature, which is divided into a pointer thermometer and a digital thermometer. The working principle is based on the difference in the purpose of use, and a variety of thermometers have been designed and manufactured. The design is based on:

The phenomenon of thermal expansion and contraction of solids, liquids and gases affected by temperature; Under constant volume conditions, the gas (or vapor pressure) varies according to the differential temperature; the role of the thermoelectric effect; The resistance changes with the change of temperature;

1. Before measuring, you should know the range (measurement range) and graduation value (temperature value represented by a small grid) of the thermometer

2. The glass bubble of the thermometer should be in full contact with the measured object during measurement.

3. The reading with thermometer should be stable before reading, and the thermometer should not leave the measured object, and the line of sight should be level with the upper surface of the thermometer liquid column.