What should I do if the touch screen can t be used after the Xiaomi phone is flashed, be specific

MIUI official wired swipe card swipe,Re-flash it。

The line brush method is now the main method of many bricks, so it has been liked by many people, but for novices, how to line the brush has become a very difficult problem, first of all, take the line brush treasure as an example, the usual process of the general line brush is:

1.Installing the Wire Brush Driver Package;

3.Enter the line brush brush mode.

Solution to the partial failure of the screen of Xiaomi mobile phones:

1. Calibrate the screen.

1. Go to the system settings of your Xiaomi Mi 4 phone and select the "Phone" option.

2. Then click "Touch Input", select "Touch Screen Calibration", it is recommended to use a stylus to calibrate according to the prompts.

Second, soft grid. 1. Enter Xiaomi Mi 4 Settings - Mobile Phone - Mobile Phone Management - Factory Settings - Enter the lock code 12345 and confirm.

2. Or directly enter the dialing interface and enter the command: * - enter the lock code.

3. The machine will start again by itself after the soft grid, and the first step after restarting is to select Hongkong, and enter the date and time according to the prompts.

4. Then change the language back to Chinese, if the Xiaomi Mi 3 mobile phone screen failure problem has been eliminated, you can reset and install the software.

First, check whether the mobile phone screen is du

There are dirt, whether there is sweat and so on, sometimes these are outside.

DAO will also affect the sensitivity of touch touch in the factor plate, which can easily lead to the failure or drift of the capacitive touch screen;

Check if there are magnets or anything around, because the capacitive touch screen should not be close to something with a strong magnetic field, and if you get too close, the mobile phone touch screen will fail, and it may be damaged in serious cases.

2. Software failure causes:

1. Enter the dialing interface of the mobile phone and enter * * to enter the hardware detection mode.

2. Swipe up and down to enter "Touch Screen Test".

3. Click the menu button and select "Touch Calibration". Follow the prompts on the interface, click OK and do not touch the screen until a prompt appears that the calibration is successful, it is best to calibrate it several times, and then turn it off and restart.

4. If it doesn't work, you can also repair it by "restoring factory settings" or re-installing the operating system on the phone, and it is recommended to back up the data first.

3. If there is no problem with the software, it is a hardware problem, and the touch screen hardware can only be replaced, and it is recommended to repair it at the after-sales outlet.

Decisively go to Xiaomi's official website, service, inquire about after-sales points near you, and then change the screen.

There may be a problem with the main version of the mobile phone, go to your local Xiaomi service center for testing.

Hi! If it is caused by flashing, it will be re-brushed.

Please flash according to the flashing tutorial, the sixth way is line brushing, which is more complete.

A more detailed description of the problem will help netizens understand the troubles you are encountering and help you solve the problem more accurately. Thank you for supporting Xiaomi phones!

The version you swiped is not compatible with your phone. Re-brush.

Self-solve:

If the battery can be removed, remove the battery and turn it back on. If the battery cannot be removed, press and hold the power button for 10 seconds and the phone will automatically turn off, and then turn it back on. If the screen is still the same after booting,Then reflash the machine and try it,Xiaomi's flashing is very simple,If you really don't understand, go to Xiaomi's official website to check it。

3.When everything is ready, please follow the brushing tutorial on the official website to use the sixth type of line brush, which is the official flashing tutorial.