The phone is flooded! Turn on after blow drying, but the touch screen doesn t work! What s going on

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

The phone is in the water and blows dry, you have to at least turn it on again after a while, if you have turned it on and the touch screen does not work, you put it on for some more time and try to turn it on again.

It's broken.,The phone screen is very squeamish.,It's over when you get into the water.,Sometimes water vapor can make the screen bad.。

There was still water in it, so I turned it off immediately, took out the battery, found a sealed bag, filled it with rice, sealed it, opened it two days later, and a miracle happened.

The phone is burned in water, take it back for after-sales repair.

The circuit board is broken, so replace it with a new one.

It may be that the motherboard has been short-circuited. Let's change it.

You can't use a hair dryer to blow water into your phone.

That may be the motherboard is broken, send it for repair as soon as possible.

The sooner the mobile phone is processed in water, the better, and if it is too late, the circuit will be corroded, and the mobile phone will be scrapped!

Here's how to deal with it:

1. Find a professional mobile phone repairer to deal with the repair in time.

2. Do it yourself, first remove the battery, disassemble the shell, and blow it with a hair dryer hot air setting for 5-15 minutes.

Note: If it is corrosive dirty water, it should be cleaned with a special motherboard cleaning solution and then blown.

The water vapor volatilization of the mobile phone is not enough, continue to dry until it is completely dry, and it will be easy to use.