How to turn off the voice of my own speech when the microphone is not turned on in my computer,

First, first confirm that the hardware is fine. If the speaker is fine, the sound card is fine, and if you've tested it on other machines and it's really good, then you can read on.

2. Make sure all the cables are exactly right. Then power on the speaker and turn on the volume switch.

3. Install the driver of the sound card correctly, if it is an onboard sound card, it is best to install the driver provided on the driver disk of the motherboard.

In fact, the computer does not make a sound, and many times it is because the sound card is not driven correctly. In general, after the sound card driver is installed, there will be a small speaker icon in the taskbar in the lower right corner. ）

Fourth, if you are sure that the driver is installed correctly, then take a look at the volume settings in the computer.

The specific method is to double-click the speaker icon in the taskbar, and check whether the volume is turned off to the minimum in the "Volume Control" and "Waveform" dialog box in the pop-up "Volume Control" and "Waveform".

If these two options are not available in the dialog box, click on the "Options" menu - select "Properties" - select "Volume Control" and "Waveform" in the "Show Volume Controls" and then set them correctly.

Note: Step 4 can only be set up after the driver for the sound card has been installed correctly.

1. Check whether the sound card, cable, speaker and other equipment are connected normally; Run anti-virus software for anti-virus;

2. Right-click "My Computer" --Properties--Hardware"--Device Manager", and open "Sound, ** and Game Controller" for any problems, that is, see if there is any yellow in the front

If so, reinstall the driver for this device to solve the problem;

4. When there is no sound and no speaker, open the control panel--- Add and remove programs--- add and delete Windows components, put a check mark in front of "Accessories and Tools", click "Next", and then, shut down and restart, the system will prompt you to install new hardware, follow the prompts to install;

Caused by not enabling the microphone. First, click on this computer to open Settings. Tap System in Windows Settings.

Then tap on Sound. Tap Manage Sound Devices. Then tap on Microphone.

Then click Enable under the microphone, detailed steps:

1. First click on this computer to open the settings.

2. Click System in Windows Settings.

3. Then tap Sound.

4. Click Manage Sound Devices.

5. Then tap Microphone.

6. Then click Enable under the microphone.

Check if the microphone is disabled:

Right-click "Little Speaker" in the lower right corner of the screen and select "Recording Device". Right-click on an empty space and select "Show Disabled Devices".

If a disabled microphone appears, right-click [Microphone] and select [Enable].

Right-click [Microphone], select [Properties], find [Listen to this device], and uncheck it.

Then click "Level" and set [Microphone Strengthen] to adjust the microphone volume moderately;

Click "Enhance" and check [Disable All Sound Effects]; Finally, in "Advanced", check the two options in [Exclusive Mode] and click "OK".

Microphone, the scientific name is microphone, which is translated from the English microphone (microphone), also known as microphone, microphone. A microphone is an energy conversion device that converts sound signals into electrical signals. There are moving, condenser, electret and the recently emerging silicon microphone, in addition to liquid microphones and laser microphones.

Most microphones are electret condenser microphones that work by utilizing a polymeric material diaphragm with permanent charge isolation.

1. The microphone signal cable is not inserted into the computer interface2. The microphone is not turned on in the audio settings

Generally, the microphone function is enabled by default, but it is also possible that the user has set it or accidentally turned off the microphone, in which case the microphone cannot be used.

3. The sound card device is disabled

If the sound card is disabled and the microphone is silent, the computer is not making any sound, so you must not hear** and you will not be able to use the microphone.

Fourth, hardware failure

For example, the microphone interface or microphone cable is not good, etc., will cause the microphone to have no sound output, the solution can be eliminated, such as taking the microphone to other computers to try whether it is useful, if it is useful, it means that the microphone has no problem, the problem lies in the computer, return to the above ideas to check; If the microphone is still silent, it means that there is a problem with the microphone, and you can replace it with one to try.

1. First, right-click the sound icon in the lower right corner and click on the recording device.

2. After entering the sound interface, click on the microphone, and then click on the properties at the bottom right.

3. Make sure that the device usage is enabled.

4. Click on the level above to set the microphone sound to the maximum, and increase the microphone strengthening.

5. Next, click Advanced, replace the original frequency, click Apply and then click OK.

The sound comes from the speakers, not from the microphone.

Summary. Hello, glad to answer for you. After the inquiry of our professional teachers, Method 1:

1. We open the "Control Panel" "Hardware & Sound". 2. Open Manage Audio Devices again. 3. Sound", we switch to the tab of "Recording", double-click the "Microphone" 4, click the tab to switch to "Level" to adjust the microphone volume to the maximum, if the microphone is not loud enough, we can also set the microphone to strengthen.

5. Pay attention to whether there is a "mute" option.

The computer microphone is enabled but there is no sound.

Hello, I am very happy to serve you before training, I am listening to the wind engaged in the consulting industry for 7 years, in these 7 years have dealt with tens of thousands of large and small consulting copywriting, with disadvantages, so you can rest assured of my ability, your problem I will recognize the truth! With the most experience and the most serious attitude to answer for you. We have received your inquiry and will reply to your message as soon as possible.

The computer microphone didn't work.

Hello, very happy to answer for you. After the inquiry of our professional teachers Method 1: 1. I accompanied you to open the "Control Panel" and "Hardware and Sound".

2. Open Manage Audio Devices again. 3. Sound", we switch to the tab of "Recording", double-click the "Microphone" 4, click the tab to switch to "Level" to adjust the microphone volume to the maximum, if the microphone is not loud enough, we can also set the microphone to strengthen. 5. Pay attention to whether there is a "mute" option.

Method 2: 1. First press the shortcut key "win+i" to open the settings, and click "System" to cover the defeat. 2. Then click "Sound" in the left taskbar 3. Click "Manage Sound Devices" on the right side of the slag rock.

4. Finally, click "Microphone" under the input device and select "Enable".

It didn't work. The sound indicator does not move up and down.

The system is still silent, how to do it? It is possible that the system's sound service is not turned on when the computer is turned on. The way to turn it on is:

Start Control Panel Management Tools Services [Windows Audio] in the Bright Service column of the Booth Line, and select its status as [Chained Started].

Still useless. Then yours is that there is a problem with the sound system, reinstall the system.

Summary. 1. In the start menu, click "Settings".

The microphone device is working but there is no sound.

2. Find "Privacy" at the bottom of the settings interface.

The microphone device is working but there is no sound.

3. Make sure that the "Allow apps to use my microphone" item is turned on. If it is not opened, click "Open", and the problem can be basically solved.

The microphone device is working but there is no sound.

Method 2: 1. Right-click on the start menu and select "Device Manager" to enter.

The microphone device is working but there is no sound.

2. Select "Microphone Array" under "Audio Input and Output". Check whether the original driver is installed and whether it is installed properly.

The microphone device is working but there is no sound.

The microphone device is working but there is no sound.

Method 3: 1. On the volume icon on the taskbar of the computer, right-click and select "Recording Device".

The microphone device is working but there is no sound.

2. Open the "Sound" property window and check whether the microphone is the "default device". If not, Set as Default Device

The computer microphone is enabled but there is no sound.

1. In the start menu, click "Set Bridge". The microphone device is normal but there is no sound2, find "Privacy" at the bottom of the settings interface. The microphone device is normal but there is no sound3. Make sure that the "Allow apps to use my microphone" item is turned on.

If it is not opened, click "Open", and the problem can basically be solved. The microphone device is normal but there is no soundMethod 2: 1. Right-click the mouse in the start menu and select "Device Manager" to enter.

The microphone device is working but there is no sound2, select "Microphone Array" under "Audio Input and Output". Check whether the original driver is installed and whether it is installed properly. The microphone device is fine but there is no sound ps:

It is recommended to uninstall the driver, and then install the driver with the original CD of the motherboard, or go to the original driver of the motherboard manufacturer to reinstall it. The microphone device is normal but there is no soundMethod 3: 1. On the volume icon in the taskbar of the computer, right-click and select "Recording Device".

The microphone device is normal but there is no sound2, open the "Sound" property window to check whether the microphone is "Default Device". If not, Set as Default Device

0x000000ed blue screen appears at boot, the fault is mainly caused by the hard disk. Try to replace the hard disk data cable and switch to another power supply cable, sometimes the hard disk data cable and power cable aging will cause the hard disk to be unable to read and write normally, and Mu Fan Rent will cause a blue screen quickly. There are soft bad sectors in the hard disk, and the soft bad sectors can be repaired by hard disk formatting, low-level formatting, and clearing operations.

4. There are physical bad sectors in the hard disk, the so-called physical bad sectors, simply put, the hard disk has been irreversibly damaged, it is recommended to back up the data and replace the hard disk as soon as possible.

Summary. 1. Method 1: You need to update the sound card driver, and directly update the driver with some sound card software. In the second step, only when the latest sound card driver is installed will the configurator channels such as the Audio Manager be displayed in the control panel.

2. Method 2: Check whether the microphone is set as the default device, click the Start menu, click the Control Panel, and then click the Sound. Step 2: Switch to the [Recording] tab and see if the microphone is set as the default device.

The computer microphone is enabled but there is no sound.

Right-click on this computer, select Manage, click Device Manager, Audio Input and Output, check whether the audio driver is normal, if there is an exclamation point display, you need to update the sound balance card driver; Click the start icon in the lower left corner, select Settings, click Privacy, select the microphone on the left side of the Zhixiao cover, and turn on the button to allow apps to access your microphone.

It's just that the computer suddenly has no sound, and it is useless to try many methods.

The computer is silent.

What a computer.

Lenovo Xiaoxin,It's just that the microphone has no sound.,I've tried a lot of methods.。

1. Method 1: You need to update the sound card driver, and directly update the driver with some sound card software. In the second step, only when the latest sound card driver is installed will the configurator channels such as the Audio Manager be displayed in the control panel.

2. Qing Minqi method 2: Check whether the microphone is set as the default device, click the [Start] menu, click the [Control Panel] item, and click the [Sound] item. Step 2: Switch to the [Capture Included] tab and see if the microphone is set as the default device.

How to set up computer problems: The steps are as follows:

1. After turning on the computer, click the [Sound] pattern in the lower right corner;

2. After finding the [Sound] pattern, move the mouse to the sound, and then click the right mouse button to call out the menu, and click [Recording Device] to enter the menu after the menu comes out.

3. When entering the sound interface, open the second option [Recording].

4. Enter the recording interface and set the microphone to [Default Device].

5. At this time, say a few words aloud into the microphone to see the volume of the microphone, if there is no sound, click [Properties] in the lower right corner of the microphone to enter the setting.

6. When entering the properties, in the general interface, open the device usage at the bottom and set the microphone to the enabled state. After enabled, turn on the [level], and after turning it on, set the microphone sound to the maximum, which is the first one, then make sure to go out to see if there is any sound, and then make sure to go out and try if there is any sound.