Is it cost effective to sew by the meter, or is it cost effective by the square?

First of all, I am coming to this question from the standpoint of an ordinary consumer, otherwise I can't measure who is cost-effective.

In fact, for the beauty sewing master, it is the most cost-effective to take 100x100 antique bricks.

According to the square, a bathroom and kitchen are a few squares, if a bathroom wall and ground are small antique bricks by meter, there are about 200-300 meters x 7 yuan and about 1800-2000 yuan, according to the square 10 square x120 yuan is only about 1200 yuan, the difference is about 600-800 yuan.

Is it cost-effective by the number of meters or by the area? In order to figure out which algorithm is more cost-effective, we must know three data, one is how much is a meter by meter, the second is how much is a square meter by area, and the third is how many meters of seam is in the area of a given area. Knowing these three data, we can figure out which way is more cost-effective.

Let me give you an example, for example, the wall of the kitchen should be sewn, the area is 50 square meters, assuming that the beautiful seam ** is 30 yuan per square meter, then it will cost 1500 yuan according to the area; If calculated by meters, there are a total of 200 meters, assuming that the United States is 15 yuan a meter, then it will cost 3,000 yuan by meters. Obviously, for us consumers, it is more cost-effective to calculate by area (the above data is not true, just a simple and hypothetical data for the sake of calculation).

Generally speaking, the more seams are more cost-effective according to the area, and the larger the tile area is the more cost-effective by the meter with fewer seams, but this can only be finally calculated according to the ** accounting provided by the construction party.

In fact, the construction party often gives different ** according to different situations, the same area, more seams and fewer seams must be different, so how to calculate it is not the seller, it is better to pay the price on the ** given by the other party if you really want to be cost-effective.

More direct, you say?

By the square. Because if you count it in meters, many of the brick sides overlap, which will reduce the area, and the area will be larger in terms of squares.

It's a little more cost-effective by square. Because if you count by the meter, you're going to have to spend a lot more. Therefore, it is recommended to calculate by the square.

The construction party often gives different ** according to different situations, the same area, more seams and fewer seams must be different**, so how to calculate it can not be regarded as a seller, it is better to really want to be cost-effective than to give the other party on the ** price is more direct, do you say yes?

25 yuan.

1. The same 120 square house, the living room floor tile 800 800 specifications, no modeling, no wave guide line, the floor tile gap is up to 100 meters according to the meter, including the balcony floor tile gap, the square is about 43 square meters.

2. Normally, calculated by meters, the contractor and the material are 5 10 yuan per meter, and the floor tiles in the living room are 100 meters x 8 800 yuan.

3. Normally calculated according to the square, the contractor and the material are 12 22 yuan square, according to 18 yuan square, and the floor tiles in the living room are 43 square x18 774 yuan, which looks like 36 yuan more by meter, and it is better by square than by meter.

Precautions for the construction of beautiful seams:

1. When using a glue gun to inject sewing agent into the gap, don't shoot too long at a time. The sewing agent is a quick-drying product, and for novices, it is enough to hit 20 or 30 cm at a time.

There are many new sewing artists who do not know the situation, and they play for a long time, and then they will solidify before they have time to deal with it, and it will be quite troublesome to wipe them after solidification.

2. There must be no stagnant water in the gaps before the construction of the beautiful seams. Do not leave standing water on the ground, such as the kitchen and bathroom, and be sure to drain the water before doing the sewing. If there is water on the ground, the sewing agent will not be easy to solidify, and at the same time, it is necessary to pay attention to indoor ventilation after the sewing construction.

3. One side of the sponge can only be used once. After the glue gun hits the perfect sewing agent, smooth it with a special scraper, and then use a sponge to wipe the spilled sewing agent. The sponge has four planes that can be used to wipe off spilled seams, and you can only use each surface once, but you can reuse it as long as you clean it up in time.

If the length of the seam is a meter and the width is b meters, the square number of the seam construction = ab square meters.

The beauty sewing can be seen as a rectangle.

Rectangle area = length x width.

For the beauty seam area = a b

Summary. First of all, when performing sewing, you need to know the area of the area to be sewn, so as to determine the amount of material required. Calculating the square area of the beauty sewing can be done by following the steps below:

1.First of all, you need to measure the length and width of the area to be sewn, using a ruler or tape measure. 2.

Multiply the length and width to get the area of the area. If it is an irregularly shaped area, you can divide it into multiple regular shapes to calculate their respective areas and add them together. 3.

If you need to sew multiple areas, you need to add up the calculated areas to get the total area. For example, for a wall with a length of 3 meters and a width of 2 meters, the square area of the seam is 3m 2m = 6 square meters.

First of all, when performing sewing, you need to know the area of the area to be sewn, so as to determine the amount of material required. Calculating the square area of the beauty sewing can be done by following these steps:1

First of all, you need to measure the length and width of the area to be sewn, and use a ruler or tape measure to measure it. 2.Multiply the length and width to get the area of the area.

If it is an irregularly shaped area, you can divide it into multiple regular shapes to calculate their respective areas and add them together. 3.If you need to sew in multiple areas, you need to add up the calculated areas to get the total area.

For example, for a wall that is 3 meters long and 2 meters wide, the square area of the old age is 3 m 2 m = 6 square meters.

Does the ground have to be counted?

Dear, you have to count it in.

Calculating the area of the ground can generally be done by following the following steps:1First of all, you need to measure the length and width of the seam area required on the floor, using a ruler or tape measure.

2.Multiply the length and width to get the area of the area to be excavated. If it is an irregularly shaped area, you can divide it into multiple regular shapes to calculate their respective areas and add them together.

3.If you need to sew multiple areas, you need to add up the calculated areas to get the total area. Note that when calculating the beauty seams, it is necessary to reserve a certain amount of material for filling the irregular shape or bevel, so it is best to increase the total square area by about 10-20% to arrange the required materials.

Is it cost-effective to sew by the meter, or is it cost-effective by the square?

Kiss, square is more cost-effective. We can understand it in this way, when decorating the home, in addition to the living room, other spaces are generally used with more small-sized tiles, such as 300 * 300mm or 300 * 600mm, etc., and to be honest, the proportion is not small, if the beauty of the seam Zheng Chun according to the number of rice shouting stupid to calculate, the smaller the tile, the more brick joints, more gaps, the money that needs to be spent is naturally a lot, so no matter how to calculate, I still think that the square way of calculating the remaining price is more cost-effective.

Generally, it is charged on a square basis. However, the smaller the brick, the higher the brick. For example, 800 800 bright bricks generally charge between 15-20, 300 600 bricks may need 25 yuan square meters, because the smaller the tiles in the same area, the more brick joints.

However, this can only be finally calculated according to the ** accounting provided by the construction party.

Generally, it is charged per square meter, but it also depends on the size of your tile, the smaller the charge, the more expensive it is.

Calculated in square meters. Multiply the length of the sewing by the width to get the result.

The construction charging method of the sewing agent: the basic price of the sewing agent + the total price of the square of the sewing agent + labor.

The beauty of different tiles is different, the charges are different, the materials are different, and the labor is not the same.

It's okay, it's more cost-effective for construction by meter, and you have to suffer a loss by square.