How to deal with the fogging of the kitchen sliding door glass?

Fog occurs when cold air meets hot air.

Method 1: Spraying anti-fogging agents and other preventive methods.

Spray a little defogging agent on the glass window, and then wipe it clean to remove the dirt and stains on the glass window. While polishing the glass, a thin layer of transparent protective film is formed on the glass, which can effectively prevent the condensation of water vapor on the glass and form a fog layer, which is especially suitable for cold winters. It can be used as an alternative to anti-fogging agents and dish soaps.

Soapy water, glycerin.

Alcohol or salt water to allow to dry before using the suede.

Or a soft, dry cloth to wipe off excess fibers, which will keep the glass from fogging up for a few days.

Method 2: Air conditioning and refrigeration method.

The air conditioner refrigeration and dehumidification function is used to reduce the air humidity.

method to remove fog. In summer, especially after many people enter the room, the air conditioner is not turned on in time, and the humidity of the air exhaled by people is large, and soon the front windshield will fog up. At this time, you can turn on the air conditioner to blow cold air on the front windshield, and use the air conditioner's dehumidification function to remove the fog vapor on the front windshield slightly.

However, if the humidity is too large and the effect of the air conditioner is not obvious, you can open the window slightly to quickly reduce the humidity in the room. Of course, it can also be used in conjunction with air conditioners, and the effect will be faster.

Method 3: Air conditioner and warm air.

Fogging is removed by reducing the temperature difference. In winter, warm air is used to blow hot air on the glass.

Quickly put the temperature of the front glass.

Raising and reducing the temperature difference between the inner and outer surfaces of the glass can prevent the fogging of the front windshield from being too heavy in time, but there is a point to note that the temperature of the rear and side glass rises slowly, so it is needed.

Anti-glass fogging spray can be purchased to spray onto the glass, or you can use soapy water to spray it on the glass and dry it with a dry towel, which can also prevent the glass from fogging.

Fill a container with some tap water, pour a few drops of dish soap to dilute it, and rub it on the glass, which can play an anti-fog role. The same can be done with the windshield and mirrors of the car. FYI.

Rubbing detergent on the glass of the kitchen will not fog up again, and the detergent has a good protective effect on the glass. The general process starts from discovering the problem and raising the problem, and after discovering the problem, make assumptions about the answer to the problem according to their existing knowledge and life experience Design the first plan, including the selection of materials, design methods and steps, etc. After reaching a conclusion, it is also necessary to reflect on the whole process of the general methodological steps of the experiment: asking questions, making hypotheses, making plans, implementing plans, drawing conclusions, expressing and communicating

The most commonly used methods in science include observation method, experimental method, investigation method and data analysis method

Observation is a basic method of science Scientific observation can be made directly with the naked eye, with the help of magnifying glasses, microscopes and other instruments, or with the use of cameras, video recorders, video cameras and other tools, and sometimes it is also necessary to measure Scientific observation should have a clear purpose; Observations should be comprehensive, meticulous, and realistic, and recorded in a timely manner; Be planned and patient; Think positively and record in a timely manner; To exchange views and discuss The design of the experimental protocol should be carried out closely around the questions and hypotheses raised When studying the influence of one condition on the research object, the experiment carried out under the same conditions except for the different conditions is called a controlled experiment General steps: find and ask questions; gather information related to the issue; make assumptions; design of experimental protocols; Conduct experiments and record them; analysis of experimental phenomena; Conclusion Investigation is one of the common methods of science When investigating, we must first clarify the purpose of the investigation and the object of the investigation, and formulate a reasonable investigation plan During the investigation process, sometimes because the scope of the investigation is very large, it is necessary to select a part of the survey objects as samples During the investigation process, it is necessary to record truthfully The results of the investigation should be sorted out and analyzed, and sometimes the statistical methods should be used to collect and analyze data is also one of the common methods of science There are many ways to collect information Go to the library to consult books and newspapers, and visit relevant people, The form of information includes text, **, data, and audio-visual data, etc., and the information obtained should be sorted out and analyzed, and answers should be found from it.

Spray a small amount of defogging agent on the glass window. Wipe clean again. to remove dirt from the glass window.

Scar. While polishing the glass. A transparent protective film is formed on the glass.

It can effectively prevent the condensation of water vapor on the glass and the formation of fogging. It is especially suitable for cold winters. It can be used as an alternative to anti-fogging agents and dish soaps.

Soapy water. Glycerol. Nine pounds.

Or salt water, wait for it to dry before wiping off any excess fibers with a soft, dry cloth. It ensures that the glass will not be fogged up for several days.

Kiss! Hello, happy to answer your <>

How to deal with the fogging of the glass of the sliding door in the kitchen is as follows; Break the original seal and replace it with dry air and a new desiccant and reseal it. Glass is an amorphous inorganic non-metallic material, which is generally made of a variety of inorganic minerals (such as quartz sand, borax, boric acid, barite, barium, barium carbonate, limestone, feldspar, soda ash, etc.) as the main raw material, and a small amount of auxiliary raw materials are added. Its main components are silica and other oxides.

The chemical composition of ordinary glass is Na2SiO3, Casio3, SiO2 or Na2O·CaO·6SiO2, etc., and the main component is silicate double salt, which is an amorphous solid with irregular structure. It is widely used in buildings to insulate wind and light, which is a mixture. In addition, there are colored glasses that are mixed with oxides or salts of certain metals to show color, and tempered glass that is prepared by physical or chemical methods.

Transparent plastics, such as polymethyl methacrylate, are sometimes referred to as plexiglass. The world's earliest glassmakers were the ancient Egyptians. Hope mine can help you <>

Do you have any other questions?

1. To eliminate fog, you can use cold air to remove fog, or you can use warm air to remove fog macro. Both methods help us eliminate fogging from the glass.

2. Due to the low temperature in winter, the comfort of the cold wind defogging method is not good, and it is rarely used to cover the mu. You can use Najan air conditioners for heating. Because in addition to regulating the temperature, one of the most important functions of the air conditioner is dehumidification.