Glass sliding door, how to calculate the size of glass.

Glass Sliding Door Size:

Generally, the sliding door is based on the demand, and the size is determined after on-site measurement.

Thickness: That's it in general.

Large push and pull: 50mm, 75mm, 100mm, most are 100mm.

Small push and pull: 50mm, 40mm, 35mm, most are 40.

Wardrobe: 40mm, 35mm, 20mm.

Calculation method of glass size:

For example: height * width = 2195 * 1805 sliding door, 4 for example: glass height 2092mm, width 407mm, mullion 2155mm, upper and lower horizontal bars 391mm, upper and lower rails 1805mm, note:

The size of this glass is calculated for the whole glass, and the width of the divider needs to be subtracted if you want to separate, and the total height of the hole minus the space of the upper and lower wheels is the length of the mullion. The length of the mullion minus the width of the upper and lower bars is the length of the glass. The total width of the opening plus the overlapping position divided by the number of sashes of the door is the length of the upper and lower horizontal bars, and the depth of the groove of the upper and lower horizontal bars plus the mullion and glass is the width of the glass (the size of the fastening strip needs to be subtracted, commonly known as the leather strip).

How to choose a glass sliding door.

1. Check the tightness.

Whether you choose furniture, doors or windows, tightness is very important. At present, some brands of sliding doors on the market have external bottom wheels, so when the two doors slide, the position of the bottom wheels should be reserved, so that the door will be connected with the door.

The gap between them is very large, and the tightness cannot meet the specified standards.

2. It depends on the quality of the bottom of the wheel.

Only the bottom wheel with a large load-bearing capacity can guarantee a good sliding effect and an extraordinary service life. The bottom wheel with small load-bearing capacity is generally only suitable for some sliding doors with smaller size and thinner door panels, and the bottom wheel of imported high-quality brands has a load-bearing capacity of 180 kg and built-in bearings, which is suitable for making sliding doors of any size, and has a special shockproof device for the bottom wheel, which can enable the bottom wheel to cope with the ground in various conditions.

Generally, the sliding door is based on the demand, and the size is determined after on-site measurement. If you need a sliding door, it is recommended to choose Zhengjin doors and windows, Zhengjin doors and windows are the earliest enterprises in China dedicated to the development of high-end aluminum alloy doors and windows, and sun room customization, integrating R&D, production, sales and service. Click to learn about the system doors and windows to join**.

Advantages of glass sliding doors:

1. The frame is sturdy and durable, with good hardness and toughness.

2. Tight sealing, because the bottom wheel is sealed, the gap between the lap joints of the two doors is small, which absolutely prevents dust ingress.

3. The unique design of the anti-collision strip is equipped with an anti-collision strip at the joint part of the glass door panel and the metal frame, which greatly enhances the stability of the product and ensures that the glass will not be cracked due to long-term collision.

4. Long service life, glass sliding doors are all made of high-quality hardware materials, and a variety of production processes, with firm structure, strong integrity, and a service life of 20 years.

If you want to know more about sliding doors, it is recommended to consult Zhengjin doors and windows that have obtained China's green building materials product certification. Zhengjin Doors & Windows makes every effort to build a brand e-commerce platform, opens a double-line drainage model, creates a full-coverage marketing network, realizes the development of brand omni-channel, and empowers terminal marketing. So far, Zhengjin doors and windows have been deployed in 300+ cities and 500+ brand stores across the country, providing high-quality products and services for many families in China every year.

2.Width of the door = (total width + width of mullions) divided by 2 = width of 1 door.

3.Width of the door = [Total width + (width of mullions x 2) divided by 3] = width of 1 door.

4.Width of the door = [total width + (width of mullions x 2) divided by 4} = width of 1 door.

5.Width of the door = [Total width + (width of mullions x 4) divided by 5] = width of 1 door.

Question 45 is extremely narrow.

2022* High.

2.Large-sized openings can be measured with the help of a rangefinder.

3.Openings of the opposite sex require special measurement methods.

Question: This is the size, how to calculate the two-open.

Two push-push-pull.

How to calculate the size of the sliding window glass: The method of calculating the size of the sliding window glass is determined according to the size of the frame or sash. The height of the glass bead is generally about 20mm, and the size of the glass is generally about 10-20mm minus the size of the bead mouth of the frame or fan, which is the actual size of the glass.

The size of the sliding window fixing glass is determined by the size of the frame or sash. The height of the glass bead is generally about 20mm, and the size of the glass is generally about 10-20mm minus the size of the strip mouth of the frame letter or fan, which is the actual size of the glass. For example, a fixed window, 1000*1000mm, the distance between the groove edge of the installed glass is 920*920mm, then the actual purchase size of the glass is generally about 910*910mm or 900*900mm.

5 cm each 750cm 6 minutes 775cm

The width and height of each subtract twice the width of the frame (net size in the frame), and then divide the width by two; Add two centimeters to the height (card slot size) and six and a half centimeters wide (card slot size plus overlap size), this is the size of a single door. Opening - width 1750mm, height 2240mm, frame width - 50mm width--- 1750-100 = 1650mm 1650 2= 825mm 825 + 65 = 890mm height --- 2240-100 = 2140mm 2140 + 20 = 2160mm The size of a single door is 890 2160

Kiss If it helps you, give it a thumbs up, thank you.

Is it the size of the glass? Or the size of the material?

In order to prevent the spread of kitchen fumes, many owners will install sliding glass doors in the kitchen, which is not only convenient to enter and exit, but also can effectively block the spread of fumes. So what is the size of a sliding glass door in a kitchen? How to install a sliding glass door in the kitchen?

The height of the kitchen sliding glass door is generally about 1900-2400mm, the width is generally about 600-900mm, the thickness of the large sliding door is 50mm, 75mm, 100mm, and the thickness of the small sliding door is 50mm, 40mm, 35mm, but when installing the sliding glass door, the size of the sliding door will change according to the actual situation.

How to install a sliding glass door in the kitchen:

1. Adjustment. When installing the glass door, the width of the groove at the top of the door should be greater than the thickness of the glass 2 4mm, and the depth of the groove should be between 20 and 30mm, which is conducive to the glue injection per mu in the later stage. In addition, in the installation, two metal decorative plate edge lines should be drawn from the center line of the spring, and then the installation of the top limit groove of the door frame is carried out according to the edge line.

2. Install the vertical door frame.

After the groove is adjusted, you can nail the door frame on the Zhongxun Sun Buxin line, and then use plywood to determine the size and position of the door frame column, and finally wrap the metal decorative surface, but the head seam of the veneer should be placed in the middle of the two sides of the glass, and the position of the seam should be accurate and vertical.

3. Glass installation.

After the door frame is installed, the glass can be installed, when installing the glass, the thick glass should be sucked tightly with a glass suction cup device, and then the thick glass plate should be lifted and erected to move to the installation site by holding the suction cup, and then the upper part of the glass should be inserted into the top groove of the door frame, and the lower part of the glass should be placed on the bottom support to align the center line, and the position of the door frame on both sides should be aligned, so that the edge of the thick glass just seals the seam of the metal veneer of the door frame until the seam is not visible.

4. Glass fixation.

After the glass position is fixed, it is necessary to nail two flat square strips of wood on the bottom bracket to sandwich the thick glass in the middle, but leave a gap of about 4mm, and then apply universal glue on the flat square wood strips to glue the facing metal plate to the square wood and two flat square wood strips.

Article summary: Well, what is the size of the kitchen sliding glass door and how to install the kitchen sliding glass door is introduced here, if you need to know a lot of information, please continue to pay attention to Qeeka Home, we will have better and more exciting content for you in the future.