What kind of board is better for the cabinet? Recommend it to me.

Furniture wardrobe, in fact, is based on personal economic strength and like, but in the selection of wardrobe plates, the most basic principles are: one environmental protection, two beautiful, three service; Now there are many types of boards, solid wood boards, toothed boards, particle boards, particle boards, particleboards, etc., the following share the experience when buying wardrobe boards:

1. Solid wood boards, solid wood boards are made of complete wood, the material is taken from natural trees, and there is no concern about environmental pollution, but it is relatively much higher, which requires higher production and construction technology, for example, in Beijing to buy wardrobes, if you do not require a brand, you can consider customizing solid wood wardrobes around Beijing, pay attention to understanding and have certain experience in solid wood treatment technology when purchasing.

2. The toothed joint plate is made of multiple wooden strips longitudinally and horizontally using adhesive and cold-pressed splicing, that is, laminated timber board. Compared with the solid wood board processing process, there is more gluing process, and the toothed plate does not use urea-formaldehyde glue in the processing process, but white latex, so it can be assured of environmental protection. When choosing a toothed plate, pay attention to buying from a regular merchant and need to check the corresponding wood qualification certificate.

3. Particleboard is a kind of man-made board that is cut into pieces of wood and other raw materials of a certain specification, dried and mixed with adhesive, hardener and waterproofing agent, and pressed at a certain temperature.

4. MDF is a man-made board made of wood fiber or other plant fibers as raw materials and urea-formaldehyde resin or other applicable adhesives.

You can go to the panels of Melaiju.

Particle board is a type of particleboard, which is a board that is made by compacting wood blocks into pellets and then gluing them together under high pressure. Due to its low cost and high selling price, it is favored by many merchants. However, compared with multi-layer boards, particle boards have uneven density, which is more likely to absorb moisture and water, resulting in cabinet deformation.

Multi-layer board, also known as plywood, is made of three or more layers of veneer or sheet glue and hot pressing. The stability performance is good, but the plasticity performance is average, and the engraving process is easy to burr. Because the multi-layer board is not easy to crack and deform, and the nail holding force is stronger, and the amount of glue is less at the same time, it is closer to solid wood, so in the actual use effect, the multi-layer board is better than the particle board.

The large core board is made of two pieces of veneer glued and spliced wood in the middle. The intermediate plank is made of high-quality natural wood planks after heat treatment and processed into wood strips of a certain specification. It has the advantages of light weight, easy processing, good nail holding force, no deformation, etc., and is an ideal material for interior decoration and high-end furniture production.

There are a variety of boards on the market, and you still have to choose the most suitable material for yourself according to your own situation.

The selection of cabinet panels should choose this environmentally friendly material, less formaldehyde, this is relatively healthy, and the new environmentally friendly material composite board is conducive to the use of the human living environment.

I think it's best to choose MDF for cabinets, because MDF is more durable, and it can achieve the effect of fire prevention, it is also more environmentally friendly, and it is also very convenient to decorate

People who have experience in decoration know that the highest cost of the main material in the home should be the cabinet, because many people like custom cabinets and whole house woodwork, so what kind of board is generally used in cabinets?

Solid wood particle board is produced according to the particleboard process, which is a relatively natural wood, relatively environmentally friendly, in addition to heat insulation, sound absorption and other characteristics, and the production process is relatively simple, but it is not suitable for large cabinets, because the load-bearing capacity is relatively weak.

Blockboard is generally called large core board, the strength is relatively high, the thermal insulation effect is also very good, in addition to the moisture content is not high, so it is also widely used at home, not easy to deform, so it is an ideal material for cabinet use.

As for what kind of board to use for the cabinet at home, it is still necessary to choose according to the decoration budget and decoration style, after all, the same cabinet uses different plates, the gap is very large, you can consult professional companies and professionals before decoration, and choose the plate according to the specific situation at home.

There are mainly MDF, particle board, multi-layer solid wood board, solid wood board. It is best to use solid wood at home, because solid wood is more environmentally friendly and durable, more atmospheric and high-grade, more stable and durable.

Generally, the panels used for cabinets are stainless steel, wooden, blister, molded, metallic, painted, fireproof, and crystalline. It is best to choose a metal texture type for household plates, which not only has high temperature resistance and strong corrosion resistance, but also has a particularly simple daily maintenance and a relatively long service life.

MDF, particle board, multi-layer board, large core board, high-density MDF. I think it's better to use solid wood pellets, and it's more textured.

Cabinet is an important part of life, it can not only be stored, but also can beautify the environment, wardrobe board with MDF, solid wood particle board, solid wood multi-layer board, ecological paint-free board, large core board is better.

1. MDF

If you have a limited budget for home improvement, then MDF is a good choice. This kind of board is a type of board that people often use, which is made of powdered wood fibers and pressed at high temperature, which has good flatness. This kind of board is soft and impact-resistant, has high strength, uniform density after pressing, and is easy to reprocess, suitable for blister boards, paint boards, etc.

2. Solid wood particle board

Nowadays, people pay great attention to the environmental protection of the interior, so they are extra careful in the selection of materials. Many people prefer solid wood particle board when building wardrobes, which is a new type of environmentally friendly substrate, which is produced by the process of particleboard. The density of solid wood particle board is relatively high, and the wood fiber particles in the board are large, which preserves the essence of natural wood, and the content of solid wood particle board is generally less than 5% in the use of adhesive.

3. Solid wood multi-layer board

If the home improvement budget is more abundant, you can also consider the use of solid wood multi-layer board, this kind of board production cost is higher, it is made of three or more layers of solid wood veneer or thin board about one millimeter of glue hot pressing, common three plywood, five plywood, nine plywood and twelve plywood.

Fourth, ecological paint-free board

If you are looking for affordability and pay attention to home health, then the eco-board is a good choice. In recent years, eco-boards have been widely used, and many people choose them when building wardrobes. This kind of board is also known as Malacca ecological paint-free board, which is an all-solid wood ecological paint-free board, with good stability, strong deformation resistance and strong nail holding force.

Fifth, the large core board

It is also known as blockboard, is a special plywood, two pieces of veneer in the middle of the splicing out of wood squares, can be regarded as a thick board, woodworking cabinets are recommended to choose this. The strength of the large core board is very high, the nail holding force is good, there is a good sound insulation and heat insulation effect, and the moisture content is not high. When choosing a large core board, choose an E1 grade board, which is generally a good-looking board with better quality.

What kind of board is good for cabinets 1. MDF (MDF): MDF is formed by high-temperature pressing of powdered wood fibers, with good surface flatness. Because of its soft and impact-resistant quality, high strength, uniform density after pressing, and easy to reprocess, it is suitable for blister boards, paint boards, etc.

But the disadvantage is that the waterproofing is very poor, and it is easy to expand and deform, so it is not the best choice. 2. Solid wood particle board: Solid wood particle board is a new, high-grade and environmentally friendly substrate, which is a board produced by the process of particleboard.

The density of solid wood particle board is relatively high, and the wood fiber particles in the board are large, which preserves the essence of natural wood, and the content of solid wood particle board is generally less than 5% in the use of adhesives, and the environmental protection is better. In addition, its processability is as good as that of particleboard. Particle board is insulated and sound absorbent, because the preparation method is easy, the quality varies greatly, and it is not easy to distinguish, so it is often not so easy to choose when buying.

3. Ecological paint-free board: that is, melamine board, its core material is selected from fir wood, poplar, golden fir, Malacca and other materials, which are made of large-diameter logs, deep processing and staggered splicing like fingers. Good stability, strong anti-deformation ability, strong nail holding force, no need to paint and more environmentally friendly is the most important material in today's home decoration material selection 4, solid wood multi-layer board:

Multi-layer board is made of three or more layers of about one millimeter of solid wood veneer or thin board glue hot pressing, whether it is a good choice for furniture or customization, it is more stable than the ecological board, a variety of colors, and it is also a good choice for home decoration. For wardrobes, ecological boards and multi-layer boards are generally used, and multi-layer boards are more advantageous, and they are generally used for customization.

Cabinets are indispensable in home life, such as wardrobes and cabinets, which are indispensable in the family. Whether we go to the mall to buy or find someone to customize, the concern is always their plates. So today I'm here to introduce you to:What kind of board is good for making cabinets?, and what to pay attention to when choosing cabinet panels.

If you are interested, please follow us and take a look.

1. What kind of board is used to make cabinets?

1.Beaverboard.

MDF, also known as fiberboard, is mainly made from finely shredded wood fibers that are pressed at high temperatures. The surface of the fiberboard is smooth and flat, the material is fine, the performance is stable, the impact resistance, the processing is easy, and it is widely used. However, fiberboard is not moisture-resistant and susceptible to expansion and deformation when exposed to water, so it is not suitable for kitchen and bathroom cabinets.

2.Solid wood particleboard.

Solid wood particleboard is a relatively new and environmentally friendly substrate. It is produced according to the particleboard process and has the essence of natural wood. It is relatively upscale and eco-friendly.

At the same time, the processing performance of particleboard is also good, with the characteristics of heat insulation and sound absorption. However, its process is relatively simple, so the quality varies greatly, it is difficult to distinguish between good and bad products, and its flexural strength and tensile strength are poor, which is not suitable for large cabinets.

3.Solid wood multi-layer boards.

Good sex. Solid wood multi-layer boards have a large amount of glue, which should be sealed during construction to reduce pollution.

4.Blockboard.

Blockboard is also a large core board, which has the characteristics of good nail holding force, firmness, high strength, sound absorption and heat insulation. Moreover, its moisture content is not high, the surface is flat, there is no warping, no deformation, and no blistering. It is an ideal material for interior decoration and the production of high-end furniture.

5.Fir planks.

It is a type of glulam that is mainly made of large-diameter logs that have been deeply processed and shaped like fingers. It can be painted and painted directly, saving a process compared to blockboard.

6.Ecological paint-free board.

Ecological paintless board, also known as melamine board, has good stability, strong anti-deformation ability and strong nailing force. Because the unpainted board has the characteristics of environmental protection and no paint, it can meet the requirements of modern people for fast environmental protection and convenient decoration. It can be used in cloakrooms, closets, wardrobes, cabinets, and other decorative furniture.

7.Fireproof board.

The fireproof board is made of silicon material or calcium material as the main raw material, mixed with a certain proportion of fiber material, lightweight aggregate, adhesive and chemical additives. Decorative panels manufactured by autoclave technology often have a thickness of up to millimeters. Fireproof board is a very economical board with high strength, fire resistance and moisture resistance.

It is widely used in interior decoration, cabinets, laboratory countertops, and other fields.

I believe everyone has already understood the above proposals. For the choice of cabinets, we still have to combine their actual situation and their own preferences. I hope that the advice on what kind of board to use to make cabinets will be helpful for everyone to buy.