iPhone11 screen casting can t be connected

You can try pressing the home button and the power button at the same time to force the shutdown until a white apple appears on the screen. In addition, this method can also clear some basic caches, if you often use your iPhone to watch**or watch**, you can try this method occasionally.

iphone6 mobile phone screen projection TV display can not connect due to network abnormalities caused by the fault.

Tools Required: iPhone6 phone.

Steps:

1. Unlock your iPhone6 to the home screen and open Settings.

2. After entering [Settings], find the [General] function and turn it on.

3. Find the [Restore] setting in the [General] function menu bar.

4. Go to the detailed list of options for the [Restore] settings, and find the [Reset Network Settings] in the third row.

5. Manually enter the 6-digit password you set to authorize [Restore Network Settings].

6. After resetting the network settings, press and hold the [Power Button] on the side of the iPhone6 body to shut down and restart.

7. After resetting the network settings and restarting the iPhone6 phone, press and hold the bottom of the screen and swipe up to evoke the [Control Panel].

Turn on Screen Mirroring.

8、After entering【Screen mirroring】Function,Select the device list to successfully project the TV。

The reasons for the failure of the projection connection are as follows:

1. Determine whether the computer, TV, and mobile phone are in the same WiFi network, and the prerequisite requirements for the projection software are all in the same WiFi network;

2、Determine whether the screen projection function is supported:Generally, smart TVs and mobile phones support DLNA or AirPlay function,If you are using the screen projection function that does not support the screen projection function,Then you can't realize screen transfer;

3. Determine whether the device is connected correctly: Generally, there will be more than one or two mobile phone devices or other smart devices under the same wifi, at this time, you need to check whether the two devices that establish the connection are the devices you want to achieve the same screen;

4. Ensure the quality of the network: If you don't want to affect your normal projection, it is recommended to use a smooth wifi, which is not easy to disconnect the network and not easy to get stuck.

Hello, the reasons why the Apple mobile phone cannot be connected in the air are as follows: 1. It may be that the device of the "air**" is not turned on and cannot be turned on**, it is recommended to check whether the device is turned on. 2. The distance between the two devices is too far to make it impossible to **.

If you can't connect your Air** device, try moving closer, then try again. 3. It may be that the device version of the air ** is too low, resulting in the inability to **. It is recommended to upgrade all devices to the latest version.

Apple 11 can't cast the screen under the same wifi, hello dear <>

1. Reconnect to the same network, not in the same LAN, iPhone can't find the device that can be projected; 2. The network status is unstable, which directly affects the iPhone screen mirroring effect; 3. iPhone and TV and other devices are running bugs, shut down and restart and then try screen mirroring. Take iphone12 as an example, what should I do if Apple screen mirroring can't connect to TV? 1. Reconnect to the same network.

To achieve screen mirroring, the related devices need to be in the same local area network, if phone12 and TV use different networks, then screen mirroring will not be able to search for devices that can be projected, and will be in a circle search state; 2. Network quality problems, when the network is very unstable or even dropped, it will directly affect the screen mirroring effect of phone12, users can check the network and use the screen mirroring function when the network is in good condition; 3. The operation bug of the mobile phone or TV can generally be solved by shutting down and restarting the collapse.

1、The projection device is not in the same LAN:The projection requires the mobile phone and the TV to be in the same LAN,If the mobile phone uses mobile data,Xiaomi TV is connectedwifi,Screen projection cannot be realized; Solution: Check the network connection status of your phone and TV and keep them on the same LAN.

2. The content is protected by copyright and does not support screen projection: some **content is protected by copyright, and only supports in the relevant **client (such as iQiyi, etc.)**, and it is forbidden to project the screen, record the screen blindly, take screenshots and other behaviors that may infringe on the copyright of the content; Solution: Users can try to cast the screen through screen mirroring, the following takes iPhone, Huawei mobile phone bridge and Xiaomi mobile phone as examples to introduce the more mainstream screen mirroring operations.

Solution: Sometimes the network is unstable and will cause the projection to fail, the user can check the network status and wait for the network to recover before projecting; 5: The TV version does not support screen projection; Workaround:

Solution 1:

1.Make sure your iPhone 12 is powered on and close to each other. Check that the device is properly powered on and not hibernating, and do not separate the two devices too far apart;

2.Check that devices such as mobile phones and TVs are connected to the same Wi-Fi network;

How to cast iPhone 12 to TV What to do if Apple 12 fails to cast screen.

Solution 2:

If you can't search your TV through iPhone12"Screen Mirroring", or there is only sound and no image after connection, you can install software such as Lebo screen projection on your iPhone and TV respectively.

After installation, connect your iphone12 to the same network as your smart TV (box), open the software on your iphone to search for your smart TV, select the device and start the connection.

Solution 3:

How to cast iPhone 12 to TV What to do if Apple 12 fails to cast screen.

If your TV can't use wired screen casting, you can connect your iPhone12 through the Lighting digital AV adapter, and then connect your TV or projector through a standard cable such as HDMI.

If you want to cast iPhone content on your computer, you can use Apple's built-in AirPlay function or use third-party screen mirroring software.

Apple's own airplay feature.

To use AirPlay, you need to have macOS on your computer and make sure your phone and computer are connected to the same Wi-Fi network.

Open iTunes on your computer. Open the content you want to cast on your iPhone. Turn on AirPlay in Control Center on your iPhone.

Select the computer you want to cast. Click "Accept" on your computer to see the contents of your iPhone on your computer.

Use third-party screen mirroring software.

For example, you can use AirDroid Cast to cast your phone's content on your computer. You need to install the AirDroid Cast app on your phone and computer, then open the AirDroid Cast app on your phone, enter the projection code on your computer, click the "Cast" button, click "Accept" on your computer, and select "Start Live Stream" in the pop-up window on your phone. to see what's on your phone on your computer.

Apple 12 album can't cast to Xiaomi TV.

AirDroid Cast is a screen casting software that allows you to receive the content of your phone's screen projection on your computer. The specific steps are as follows:

Open the AirDroid Cast app on your iPhone and computer.

After opening the software on your iPhone, enter the projection code on your computer and click the "Cast" button.

Click "Allow" on the computer and select "Start Live" in the pop-up window on your iPhone.

You can see the content of your iPhone on your computer.