iPod touch5 upgrade won t turn on

2. Then press and hold the power button (above) + home button (in the middle below) on the touch, the touch will turn off, and then continue to press and hold until the white apple appears.

3. Turn on the power button lightly, continue to press and hold home, until the icon of iTunes and a cable appears, at this time it is a universal recovery state, and no system firmware can enter.

4. At this time, iTunes will search for touch, and then it can be restored.

I'm talking about UI because the visual aesthetic is different from person to person. There are many advantages after iOS 7 upgrade, but the disadvantages cannot be ignored.

2. The control center slides up from the bottom of the screen, adding switch functions such as wifi, **, flashlight, etc.

3. Third-party input methods can be used. (But it's not sure if there is an input method for the nine-grid palace).

4: You can block incoming calls and text messages. (No doubt is true).

5. Added the security and anti-theft function, bound to the Apple ID, others must enter the correct Apple ID to activate, even if the system is re-flashed, it is also required to enter the Apple ID.

Disadvantages: 1. Multi-task management has been replaced by real background running software, and the current market is a device with small memory except for iPhone 5 memory that has reached 1G, so the memory is obviously insufficient. (As a result, the operation is not smooth, and the keyboard sometimes does not pop up).

2. Power consumption, no doubt that this is certain. Really in the background, there is also a shake phone wallpaper exchange, which is enough to increase power consumption.

3. Other shortcomings will be discovered and supplemented later.

Recommendation: Personally, I recommend not to upgrade unless you like the new UI and need to use security features. In fact, ios7 has strict hardware requirements, especially memory, 4, 4s will seem a bit insufficient.

1.Check which one is broken, check the charging cable first, replace the cable with the iPhone mobile phone connection iPod touch 5, and see if it can be normal, if it is not normal, then the charger is broken, if it is normal, then the charging cable is broken.

2.The charger is not plugged into the socket for a long time without unplugging, it is best to use Apple's charger to charge.

3.The temperature is low, iPod touch 5 charging needs to be at a constant temperature, it cannot be charged if it is a few degrees below zero, it is recommended to put iPod touch 5 under the covers to charge.

iPod touch won't turn on: Workaround.

touch to connect to the computer, then shut it down;

Press and hold the power button without letting go, and wait for the white apple icon to appear;

When the white apple appears, immediately press and hold the home button, remember not to release the power button at this time;

After waiting for the white apple to disappear, continue to press and hold the home button while releasing the power button;

If the subject is in the situation, please try to press and hold the power button and the volume down button to enter the recover interface. If it doesn't work, it can only be sent for repair.

Connect to the computer to see if the computer can identify the device It can identify and prove that there is no problem with the motherboard DFU mode is a problem with the system If it can't be recognized, it is a hardware problem.

HOME and boot build at the same time, try it for a long time.

Keep pressing that power button until the phone turns on.

1 Press and hold the power button on the top of the device, and after about 20 seconds of powering on, iPod touch will enter this activation interface.

2 Open iTunes and connect your iPod touch with a data cable.

3 After opening iTunes, if this screen appears, please click "Update Settings".

4 Check Set as new iPod touch and click Continue.

5 In the Name field, you can change the name of your iPod touch. When you're done, click "Done".

6 After this screen appears, the activation of the phone is complete.

Nonsense, how can Apple confirm your warranty if the new machine does not activate.

After the start of iOS 5, the machine can activate it by itself, and it was necessary to activate it before.

However, to connect to the Internet, the iPhone can be plugged in, and the Touch must be connected to the WiFi to activate.

After booting up, you can activate it by connecting iTunes.

If you buy a new one, you need to activate it.

No, I'm still waiting for my trip, helpless.

Solution to iPod Touch3 won't turn on after factory reset:

1.Enter recovery mode first, and then use iTunes to restore or upgrade your system, also known as reflashing.

2.How to enter recovery mode:

Keep your iPod connected with the iTune cable, iTunes on, iPod powered off.

Keep holding the round Home button and don't let go, and then keep holding the Power button, remember to hold and not let go until the Apple logo appears on the iPod screen and then release the Power button, but don't let go of the Home hand.

3.Wait for a few seconds, iTunes recognizes that there is an iPod that needs to be recovered, and a data cable appears on the iPod screen to connect to iTunes - it has entered recovery mode.

Once that's done, it's time to boot up.

Mine too, I've been waiting for 3 hours for this cycle.

Your problem is a white apple, and the cracked touch will appear, and mine is also today, hehe.

Get to the point: 1 First of all, you connect to the computer, there must be iTunes on the computer2 and then open iTunes, and then you press and hold the home button and the ON key at the same time, wait for about 10 seconds to release the open key, the home button is always not sent, and the computer will react after 5 seconds! It will ring, and iTunes will also show that you need to recover.

3. You just need to restore, and then you don't have to worry about it until the progress is completed, and you will find that your iPod has come back to life At this time, it is the iPod before you cracked it, but the system is up-to-date.

You can crack it again and you can use the paid software.

Take it to a specialty store for repairs

iPod touch2 cannot be upgraded to iOS 5, the highest version supported by the device is.

The iPod Touch2 upgrade system version is as follows:

Step 2: Connect your iPod touch2 to your computer with a data cable.

Step 3: On the summary page, click "Check for Updates" and follow the iTunes instructions to upgrade the system version.

The firmware that seems to be the highest design can't be raised any higher.

No, the hardware can't keep up, so iTunes can't detect the firmware upgrade.