What insurance is paid to prevent formaldehyde? What are the insurances for formaldehyde?

In fact, this is very simple, you can go to life insurance to buy an accident insurance.

Formaldehyde removal method recommendation:

Activated carbon formaldehyde removal is a relatively cheap and practical method, characterized by physical adsorption, not easy to cause secondary pollution, but its adsorption capacity is limited, and the symptoms are not cured. The physical effect of activated carbon is deodorization and detoxification; There are no chemical additives and no effect on the human body.

Through the circulation of indoor air, the content of harmful substances in indoor air can be reduced, thereby reducing the harm of such substances to the human body. However, due to different circumstances, it is impossible to keep the windows open, just like in winter, people often close the doors and windows, indoor and outdoor air can not circulate, not only the content of formaldehyde in the indoor air will increase, radon gas will continue to accumulate, and even reach a high concentration; Moreover, the ventilation method can only remove part of the formaldehyde, which is a symptom but not a root cause.

300 grams of black tea to make hot tea in two basins of water, put it into the living room, and open the window to ventilate, this method has a certain effect, but as soon as the window is closed, the pollution immediately returns, and it is also a symptom but not a cure.

Plant decontamination can be selected for light pollution: general indoor environmental pollution is light pollution, and plant purification can achieve better results. Plants should be selected and placed according to the different functions and sizes of the room.

In general, a room of about 10 square meters is more suitable for two pots of plants that are meters high. This method has limited absorption and is only used for light pollution, which is also a palliative rather than a cure.

Chemical formaldehyde removal: (1), sprays and other drugs are easy to cause secondary pollution, and may damage furniture. (2), advocate one-time removal (experts question, not credible), and the release of poison gas at home is a slow process, so it is removed today, and it will smell again in a few days, and it is not low.

3) The products are too miscellaneous, it is difficult to distinguish the authenticity, although many formaldehyde products are under the banner of "high-tech" and "environmental protection", but they use some inferior chemical synthetic substances. Although these products can remove formaldehyde to a certain extent, they may also bring secondary pollution.

6. Photocatalyst formaldehyde removal method: recommendation index 10

The photocatalyst formaldehyde removal method is currently the most effective formaldehyde removal method, and its principle is to decompose organic matter into non-toxic and harmless water and carbon dioxide through photocatalytic reaction; Luoyang Shunding Environmental Protection Technology **** uses Mitsubishi Technology's original imported photocatalyst, which makes up for the shortcomings of traditional photocatalysts that require light, and has the characteristics of adsorption, decomposition, removal, and non-toxicity, and can remove harmful substances such as formaldehyde from the source, no secondary pollution, and a ten-year warranty!

1. Keep the office ventilated at all times.

Ventilation is the most effective and easiest way to remove formaldehyde from a house. The opening of doors and windows helps the circulation of air, and the entry of fresh air can dilute the harmful substances in the house, help the emission of harmful substances in the house, and release the toxic gases in the decoration building materials as soon as possible. In order to have good ventilation, it is best to open the doors and windows to allow the air to circulate to form convection, and if the outdoor air quality is poor that day, then avoid opening the windows.

2. Use orange or grapefruit peel.

We can also use folk methods, such as putting the dried oranges or grapefruit peels in every corner of the newly renovated office, which can not only absorb the smell of paint, but also achieve the fragrance of fruits, and speed up the rate of odor removal.

3. Use plants to purify the air.

This method is not only effective, but also beautifying. The sharpest is ivy, and then there are rubber trees, you can buy a few smaller pots of rubber trees and put them in the office, these plants can absorb the corresponding pollutants, thereby reducing the concentration of pollutants in the air in the house. Of course, plants can not be placed too much, usually in a room of 14 16 square meters, put 2 3 pots, or use a few pots of salt water, change once a week, can reduce the concentration of harmful gases in the air.

Placing 6 pots of salt water with a concentration of 5 parts per thousand in the house has the best effect on removing formaldehyde.

Fourth, wet cleaning.

When cleaning all parts of the office, it is recommended to use wet cleaning methods, mopping the floor and wiping the desktop, window sill, etc., with a wet mop or wet rag, which is conducive to the removal of formaldehyde.

5. Invite professional institutions.

The safest way to remove formaldehyde is to ask a professional indoor air testing and management organization to detect whether the formaldehyde, benzene, xylene, TVOC and other components in the office exceed the standard, and then scientifically and thoroughly purify and treat the air in the office to keep it safe and fresh.

In addition to formaldehyde treatment, the company personally recommends not to do it. Formaldehyde treatment companies generally spray some chemicals to react with formaldehyde to generate non-formaldehyde substances, or form a protective film on furniture to prevent formaldehyde from volatilizing. In this way, formaldehyde is indeed reduced, but are these agents harmless?

What is the difference between spraying these agents and spraying paint? Paint has been used for thousands of years, and to this day, paint still volatilizes toxic solvents. These agents are likely to become a new source of contamination.

Formaldehyde has been reduced, but other polluting components have not been reduced, and new polluting components have been added, which outweighs the losses.

Medical insurance, home contents security insurance.

There must be a lot of them on the Internet, but they are basically more expensive, and in fact, the effect is really average.

Formaldehyde, also known as antaldehyde, is an important raw material in industry. The time of evaporation varies from 3 to 15 years, mainly due to the different states of formaldehyde.

Formaldehyde in furniture mainly comes from adhesives and paints, if the surface of the paint contains formaldehyde in a free state, generally speaking, it can be emitted in a few months.

For many polymerized formaldehydes, it is almost impossible to wait for them to be completely emitted, so we can choose to use some formaldehyde removal methods to speed up the emission of formaldehyde.

Here's how:

Generally speaking, every 600g of activated carbon can adsorb 10 square meters of formaldehyde, so for some wardrobes, bedside tables and other closed furniture, 1-3 pieces of activated carbon can be placed to effectively adsorb formaldehyde in furniture;

If you want to quickly decompose and adsorb at the same time, please use clear mangreen nano photocatalyst to spray on the surface of furniture, which can remove most of the formaldehyde substances in one week, which is effective for a long time. Home purification is simple and convenient. In this materialistic society, there are fewer and fewer healthy products for conscience.

Qingman Green is a formaldehyde removal product that cares about it.

It is important to note that:

In the newly renovated house, pregnant women and children should not be allowed to inhale formaldehyde, otherwise it will be extremely harmful to the body.