Android new version 4 0 4 how to set a static IP address under WIFI

A lot of engine oil will find that after upgrading Android, you can't use static IP!! Actually, it's not a problem, it's just a little different in the settings, and the following is a re-teach you how to set a static IP under Android.

1. Turn on the wifi, 2. Click the name of the wifi access point you need to connect to.

3. After entering the password, hide the input method and you will find "Show password" and "Show advanced options".

4. Check - Show advanced options.

5. Pull down and "IP Settings" will appear.

6. Change the DHCP in the option to --static.

7. After changing to static, there will continue to be several items below, and the way to fill in is as follows:

Network prefix length: do not need to be modified.

Domain name 2: The same as domain name 1 is fine.

Please note that you have to fill in all the options with the number input you need to set, and each space has to be entered by yourself once, and then it will turn black and you can connect, and that's how I did it.

Just buy an IP**.

Upstairs said that it is gray, please note,To fill in all the options you need to set the number input,Each space has to be entered once,The number of network prefix length 24 also has to be re-entered once,Even if the same number has to be entered once,If there is only one DNS1 value,Then DNS2 is also input to be consistent with DNS1,Then it will become black,You can connect after storage,That's how I got it。

The place of static IP setting has changed, the original press the menu key in the connection list interface, you can enter the advanced settings, you can change the IP, but after the IP, change to a different IP connection, or it is an automatic IP connection, you have to set it again. But you can now set the IP for each connection individually! Long press on the connection directly on the connection list, and the "Modify Network" option will appear.

After entering the checkbox below "Show Advanced Options" will be inside"The IP setting can be set by changing the IP setting from "DHCP" to "Static". Since it's an IPv6 protocol, there's no mask in it, instead of the "network prefix length" option, interview in four numbers, maybe which one is suitable.

How to set the mobile phone IP address How to set the mobile phone static IP address.

1) First, get your IP address, subnet mask, default gateway, and DNS server.

On the computer, use the :win key + R to open the run (or directly select "Run" in the "Start" menu), enter :cmd to enter the DOS command line, and type: ipconfig all to run to view the IP address and other related information.

2) Set the IP address of your phone.

Click "Settings" to enter Wi-Fi and select the "WiFi" hotspot that needs to be connected.

Select "Static" in the IP Settings column, and then set the IP address obtained in the first step.

Note: The last three digits of the IP address can be set according to your needs, but it cannot be the same as the address set by other devices, (the setting range is: 1-255) shall not exceed 255.

Finally, click Save to link the wifi hotspot.

Tool: **rabbit**ip***

Language: Chinese Simplified.

Environment: WinXP Vista Win7-10 Mobile 1Break through the corporate campus.

2.Dynamic IP to do web crawler!

3.Brush the traffic, brush the click traffic!

Rank up!

5.Modify the IP address

This should be analyzed according to the actual situation, which is better.

The rabbit-ip** we use is a very good IP provider.

Software Name:Nine! State dynamic IPSoftware language: Chinese simplified.

Software category: Network Acceleration.

Operating environment: WinXP Vista Win7 Win8 Win10 mobile phone.

Multi-IP regions.

How come, my phone is not static, and it can be connected to the built-in wifi

1. Click Settings-Wireless and Network-2, WLAN Settings, 3 menu keys, select Advanced-4, use static IP and tick -you can fill in the IP below.

Among them, if step 2 is selected, step 3 cannot get out of the advanced option box, you can continue to select manage network, and then continue to step 3 and later.

Quite simply, one command solves.

Windows + R brings up the Run box.

Enter cmd in Open Open dos command line and enter ipconfig all and press enter to find the ipv4 address in the information that comes out, the following address If you only need to modify the last digit 4, it will be OK, this 4 can be replaced by the number of 2-254, of course, you can't use the 4 that has been used by the machine.

IPs are automatically assigned, static IPs are required and administrators are required.

This is achievable.

You just need a software that can change the converter.

You can go down... Rabbit! @子转换器.

Domestic dynamic converter, 5000 lines, convenient.