How to quickly remove formaldehyde in the most effective way?

2-3 months, need to be governed, this problem is a bit similar to the subject with a coordinate Shenzhen, the answer to the subject did there before moving here:

1) Ventilation. Answer: The main house is renovated in June, the temperature is relatively high, and the effect of ventilation all day long will be better than the effect of stuffy method. The subject is in Guangzhou, and the temperature conditions should be okay, which is conducive to formaldehyde volatilization.

2) Blow the fan against the furniture, open and pull out all the cabinets and drawers, and then use a large fan to blow against it to assist ventilation.

3) Air purifier, if you want to move in, it is not realistic to open the window for ventilation if the weather is not good after moving in, so you can also buy an air purifier with formaldehyde removal function depending on the situation and use it at night or when the weather is bad.

4) I used photophyll spray to treat the home improvement boards, and I had concerns about the aldehyde removal spray at the beginning. The first is the ingredients, the second is the effect, the trial of photophyll is also because its ingredients are herbal extracts, which do not hurt the board or the human body, and it catalyzes the decomposition of formaldehyde and does not need light conditions, so it is relatively safe. After use, the furniture deodorization is relatively fast.

5) Activated carbon. Activated carbon is said to be able to absorb some formaldehyde and peculiar smells, but later the ventilation and photophyll effect is greatly good, and the owner uses the activated carbon inventory in the refrigerator and shoe cabinet to remove the odor.

In addition, it is recommended that the subject try to keep as much ventilation as possible and stay less in a closed room.

Ventilation is undoubtedly the most common and effective way to remove formaldehyde in our lives, but in order to remove formaldehyde faster, we must first speed up the release of formaldehyde in the air. Use the air conditioner, floor heating and other equipment at home to adjust the indoor temperature to about 25 degrees Celsius, so that formaldehyde can be quickly released into the air, after closing the equipment, we must open all the windows in the house in time before the temperature in the house drops, so that the released formaldehyde volatilizes to the maximum extent, and after many times, you can effectively remove the indoor formaldehyde.

The effective removal of formaldehyde is as follows:

1. Ventilation, there must be a large amount of air exchange, and long-term ventilation is required to remove formaldehyde at almost no cost; Clause.

2. Activated carbon adsorption is also a more commonly used method in life, with low cost, but it is necessary to replace activated carbon regularly; Clause.

3. Plant adsorption method, while beautiful indoors, plays the role of adsorbing formaldehyde, such as pothos, spider plant, ivy, etc., but the effect is relatively poor; Clause.

4. Use an air purifier. In addition, there are new methods for removing formaldehyde such as biological enzymes and photocatalysts.

It is enough to put more bamboo charcoal bags in the house, or if there are no people living in the house now, open the windows to ventilate more, and then put more green plants in the house.

Opening windows to ventilate the most effective way to emit formaldehyde, and I'm really helping you look forward to it

The formaldehyde content of the newly renovated house is relatively high, and the formaldehyde can be removed by putting a few pots of pothos in the house.

Fast ventilation is the best option....

The most effective methods for indoor formaldehyde treatment are as follows;

1. Opening windows for ventilation is currently the simplest and most effective way to remove formaldehyde. Therefore, it is recommended that after the decoration of the new house, open more windows for ventilation, and generally you can move in after 3-6 months of ventilation.

2. Now most families will install a set of fresh air system. Of course, the fresh air system itself does not have the function of removing formaldehyde, but it can also accelerate indoor and outdoor air circulation, and volatilize and dilute formaldehyde and other harmful gases in the new house by exchanging fresh air inside and outside the room.

3. Photocatalyst air treatment, many people don't understand, what is photocatalyst air treatment, in fact, it is the "formaldehyde removal" service that many housekeeping companies will carry out through the catalytic converter of photocatalyst, under the action of light, it can decompose formaldehyde, toluene, TVOC and other harmful substances in the new house into harmless gases, so as to play a role in removing formaldehyde.

4. Air purifier, in many families nowadays, there is basically an air purifier, which can also play a certain role in removing formaldehyde, and its filter can decompose formaldehyde into carbon dioxide and water to avoid secondary pollution, so as to remove formaldehyde and purify the air.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.

The method of quickly removing formaldehyde is as follows:1. Open windows for ventilation. As we all know, air has fluidity, so we can use this property of air to disperse indoor air containing formaldehyde, benzene and other toxic gases, that is, open windows for ventilation.

When opening windows for ventilation, we should try to keep the room in the hall (through the hall), so as to ensure the maximum speed and efficiency of the indoor air conversion rate.

2. Green plant potted plants. Many green plants can absorb harmful gases such as formaldehyde, benzene, xylene, radon, TVOC, ammonia and other harmful gases in the air, such as spider plant, pothos, drug sucking grass, tiger pill orchid, monstera, aloe vera, etc. However, the ability of green plants to absorb formaldehyde is often very limited, and it is mainly used to assist indoor air purification.

3. Aldehyde removal products. Aldehyde removal products are more targeted and efficient than the above two methods, among which the more common ones are activated carbon and formaldehyde scavengers, but in terms of efficiency and applicability, formaldehyde scavengers are obviously more suitable for indoor formaldehyde removal than other formaldehyde removal products, and even the main means of formaldehyde removal of formaldehyde treatment companies is formaldehyde scavengers.

There are 3 ways to quickly remove formaldehyde:

1. Physical decomposition.

Baizao Na is the most favored aldehyde removal material for environmental protection engineers, not only adsorption and purification speed is fast, but also can play a role in decomposing formaldehyde, compared with the traditional carbon bag effect is better and faster, and can be sun-free for three years, put it at home at all, and do not have to worry about the problem of adsorption saturation, it is more convenient to use, and it is more suitable for use in an emergency.

2. Natural decomposition medium.

Furniture is one of the important decorations of pollution, especially for the pollution inside the board, ordinary purification is not able to go deep into its interior, in order to better and faster purify the pollution inside the furniture board, the treatment engineer recommends that it is best to use natural decomposition medium to spray the furniture board, it will penetrate the inside of the furniture board, and carry out deep penetration to induce decomposition, which can play a very good role in accelerating the purification of furniture odor and pollution.

3. Air purifier.

The air purifier has a fan-like device, and at the same time has a built-in filter, which can filter the indoor air, and can not open the window for ventilation or night time, it can be used instead of making up for ventilation, which has a good effect on removing the pollution of the confined space.

Glad to be able to answer your questions.

The most effective way to remove formaldehyde is photocatalyst.

Air purifier.

For air purifiers, the well-known effect is purification, and the function of purifying formaldehyde was developed later. Its purification of formaldehyde mainly relies on adding activated carbon plates in the filter screen, and the service life of activated carbon plates is limited, so it must be replaced in time, otherwise it will cause secondary pollution. In addition, formaldehyde is ubiquitous indoors, so it is recommended to place an air purifier in each room to ensure that the effect of comprehensive formaldehyde purification is achieved.

Effective ventilation.

If the indoor and outdoor air can interact efficiently when the window is opened, then the use of ventilation can timely and quickly purify the indoor formaldehyde and reduce the formaldehyde content. However, effective ventilation is not always available, for example, when outdoor air pollution (haze) is heavy, it is inconvenient to open windows for ventilation, and when the windows are not opened, indoor formaldehyde will gradually accumulate until it exceeds the standard again. Therefore, in order to control formaldehyde more efficiently and safely, we need to use it together with other methods.

Chemical purification.

The chemical purification method mainly consumes formaldehyde in the air through physical adsorption or chemical reaction; At present, there are two types of formaldehyde scavengers on the market, one is to purify the air by neutralizing formaldehyde and generating harmless substances; The other is to purify the air by sealing formaldehyde and preventing the volatilization of formaldehyde.

If you want to remove formaldehyde, it is not possible to complete it overnight, because formaldehyde is very stubborn, its release life will reach decades, if you can not control formaldehyde within a safe range, formaldehyde long-term contact with the human body, it is likely to damage human health, the following is for you to introduce several efficient methods of removing aldehyde, I hope it can help you.

1. Wise Stone.

It is a purification product favored by decoration families in recent years, compared with other formaldehyde removal products, its own pores are more, with the dual function of absorption and decomposition, and the speed of formaldehyde removal is also fast. Its unique decomposition function can save the time of drying, and it is more convenient to use, which can effectively control the formaldehyde problem for a long time. When choosing, it is important to note that it is a gray ore with an irregular shape and is not a round particle.

2. Ventilation.

This is nature's gift to us, and it is the most economical way to remove aldehyde, as long as you open the window, fresh air will enter the room, and formaldehyde will be purified by dilution

3. Activated charcoal.

Using activated charcoal is also a great option. The surface of activated carbon is rich in pores, which can adsorb indoor odors, and also has a certain effect on pollution control, but the activated carbon treatment capacity is limited, and it will produce saturation after about half a month of use, and it is impossible to continue to work.

Fourth, photocatalysts.

Photocatalyst, as the name suggests, is a catalyst mentioned in our junior high school chemistry, which decomposes formaldehyde into carbon dioxide and water through light, reduces the formaldehyde content in the room, and achieves the purpose of removing formaldehyde.

Fifth, the fresh air system.

The principle of the fresh air system is ventilation, the outdoor fresh air is filtered and transported to the room, and then the harmful substances containing formaldehyde are discharged outside to achieve the effect of removing formaldehyde.

Formaldehyde in indoor decoration pollution is mainly in indoor decoration materials, of which harmful substances account for a large proportion of latex paint, paint, wallpaper and other wall coatings, so it is very important to deal with formaldehyde from the source.

1. Open windows for ventilation.

If the smell of newly bought furniture is too heavy, you can first put it in the place near the window, open the window, and remove the ventilation, at this time, you can also put a basin of cold water on the side of the furniture, pour some vinegar, and do not put it on the veranda when passing a few times, so as not to have sunlight and damage the furniture. This not only removes formaldehyde, but also removes furniture odors.

2. Onion water:

You can chop the onion and put it in a basin, then stir it open, and then put it in a suitable place on the furniture, so that the paint smell on the furniture will disappear quickly after a few days, and the water temperature at this time is the most suitable for room temperature, but it will evaporate faster in summer, which means that the taste will disappear faster in summer, and if it is winter, the indoor temperature can be guaranteed, which will also speed up the disappearance time of formaldehyde on the furniture.

3. Plant removal method:

If the furniture is not solid wood furniture, which often contains formaldehyde, at this time you can put some plants, such as ivy, iron tree, chrysanthemum, spider plant and other plants with strong absorption capacity can be placed next to the furniture, but formaldehyde stays for a long time, and at the same time to cooperate with the window ventilation to reduce the harm to the human body.

4. Leaf wide mud adsorption:

The adsorption of Ye Guang mud is a physical method, which is more suitable for adsorption in houses with relatively light odors. Bamboo charcoal is placed in the corner, which can remove odors, and can also prevent moisture, sterilization, and insect repellent. In an environment with a lot of formaldehyde, you can put Ye Guang mud with good adsorption in the new wardrobe, and completely remove the smell of wood and adhesive in less than a week.

5. Formaldehyde scavenger:

The principle of formaldehyde catalyst is similar to that of photocatalyst, which is mainly to chemically react with formaldehyde and convert it into other stable substances, but it is difficult to ensure whether it will produce other harmful substances when carrying out chemical reactions.

How to remove formaldehyde quickly.

1. Open the window for ventilation, let the window ventilate, and let the indoor and outdoor air circulate thoroughly, which can reduce the content of harmful substances in the indoor air, so as to reduce the harm of such substances to the human body.

2. Activated carbon formaldehyde removal is a relatively cheap and practical method, characterized by physical adsorption, and the adsorption is thorough, not easy to cause secondary pollution, with deodorization, odor removal effect.

3. Brew a pot of hot tea with 300 grams of black tea, then put it in the living room, and then open the window to ventilate.

Detailed description. 1. Through the circulation of indoor air, the content of harmful substances in the indoor air can be reduced, so as to reduce the harm of such substances to the human body.

2. Activated carbon to remove formaldehyde is a relatively cheap and practical method, characterized by physical adsorption, thorough adsorption, not easy to cause secondary pollution, activated carbon physical action deodorization, detoxification;

3. Use 300 grams of black tea to make hot tea in two basins of water, put it in the living room, and then open the window to breathe.

4. Plant deodorization method, the general indoor environmental pollution in the light and moderate pollution, the pollution value is less than 3 times the national standard, the use of plant purification can achieve better results. Choose and place plants according to the different functions and sizes of the room. In general, in a room of about 10 square meters, it is more appropriate to put two pots of plants with a height of meters.

5. Select and place plants according to the different functions and sizes of the room. In general, in a room of about 10 square meters, it is more appropriate to put two pots of plants with a height of meters.