Can a homegroup be a member of only one LAN or be federated by members of another LAN group

You're all connected to the switch, and then you're all setting up your workgroup to be the same workgroup! In the computer properties that can be viewed! This is the XP system, if the win7 system should be similar!

Win7 is better to build a working network, and then everyone's working group is the same, and it's OK.

1. Different family groups need to be established in the same LAN. dao

2. The simplest and most effective method:

1) In the internal computer network tethering center advanced sharing settings, set the first option network discovery to "turn off network discovery", 2) turn off the second homegroup, 3) after the homegroup is created, go back here and set the network discovery to "enable network discovery", 4) then you can use other computers in the same LAN to search and join the second homegroup.

How to create a homegroup:

1) Please make sure that a LAN has been established and that all computers have been properly connected to the LAN and that the whole LAN is working properly.

2) Use the left mouse button to click on the network icon in the notification area in the bottom right corner of the screen and select "Open Network and Sharing Center" from the pop-up menu, and you will see the Network and Sharing Center window.

3) In the Network and Sharing Center, under the "View Network Activity" option, you can see an option called "Homegroup", if it shows "Ready to create" as shown in Figure 1, it means that there is no homegroup in the current network and you can start creating. However, if it shows "Joined", it means that there is already a homegroup in the current local area network, and you can only choose to join the homegroup, and you cannot create a new one.

4) Click "Create Homegroup" in the interface that follows to start the creation process.

6) After selecting the library you want to share, click the "Next" button, Windows will start to make certain settings and adjustments to the system, this process may take a certain time. Once you've set it up, you'll see the screen shown in Figure 3, which means that the homegroup has been created. It's important to remember the password shown here because other computers can't join the homegroup until you enter it, but users can change the password.

7) Once you have written down your password, click the "Done" button to exit the wizard.

**) Press this setting to print the host.

One: It's best to have all computers in the same workgroup.

My computer right-click --- properties (advanced properties) -- computer name --- working group --- changed --- changed to the same.

2. Connect to the printer host and set it up.

1:a:win8: First enable network discovery--- network sharing center--- advanced sharing settings--- current configuration file --- check to enable network discovery.

Tick the box before sharing the file with the printer to confirm exit.

The following settings are the same as XP

b:win7:

Tick the box before sharing the file with the printer to confirm exit.

The following settings are the same as XP

XP settings. 2: Open the Control Panel ---User Account" -- Manage Account -- Enable Guest User.

Don't set a password.

OK three: Click on the keyboard"win+r".Then enter, make sure the local Group Policyr is turned on.

A: Computer Configuration - Windows Settings - Security Settings - Local Policy - User Rights Assignment, find "Refuse Local Login" in the right area, double-click to enter the state, delete the guest, and confirm the exit. Double-click "Refuse to access this computer from the network" to enter the state, delete the guest account in it, and confirm the exit.

b: Click Security Options on the left, find Network Access: Sharing and Security Mode of Local Accounts and set it to Guest Only - Local Users Authenticate as Guests in the right area.

c: Click on "Security Options" on the left side, Account.

Local accounts with blank passwords are only allowed to log in to the console and are set to deactivate.

Start the Control Panel Devices and Printers, right-click on a printer you want to share, click "Printer Properties" in the pop-up options, click the "Share" tab, check "Share this printer", and then click OK, so that the setting is complete, and other computers can access this shared printer through the network.

In fact, the homegroup is the online neighbor in the XP era, the name change function is the same, the settings inside can refer to the online neighbor of the XP, the only difference is that the security is stronger than the XP's, and the password is mandatory to log in remotely.

Install Kingsoft Guard, it will prompt that there is sharing, all closed, and it will not affect your separate use

The homegroup is like a room, you have to add people to it, and it is the default group win7 has to leave it alone.

The user sharing depends on the permissions you set, and if someone else wants to access you, it depends on whether you have the right to do it.

I see win7 seems to be adding users into the LAN, these are not the users you want to share, don't worry

You can turn off sharing and turn it on, it's nothing

It should be that you choose the home network when you choose the network, so your computer is used to link the computers on the home network by default into the homegroup, so that you and your family can share, and the homegroup is password protected, you can choose what to share at any time, and there is no problem with a computer at home, so it doesn't matter if you turn off sharing.

It's good to change the system, or turn it off, and it may be poisoned, win7, we don't know much.

The steps are as follows:

1. First connect the router to the Internet, then connect the switch to the router, and then connect the computer and printer to the switch.

2. Open the [Control Panel] in the settings and click [Network and Sharing Center] to enter.

3. Click the HomeGroup option at the bottom of the Network and Sharing Center window that opens.

4. Enter the Homegroup window and click Create Homegroup.

5. In the Create Homegroup window that opens, click Next.

6. Set the options in the block to [Shared] or [Unshared], and then click [Next].

7. Then the computer will automatically create a [homegroup] and generate a network password; Then click Finish, and you're done creating your homegroup.

8. Once you've created your homegroup, you'll be able to see your computer's sharing settings in your homegroup.

9. Follow the steps above on other computers to enter the [Share with other computers in your home] window, and then click [Join Now].

10. Enter the HomeGroup password generated in Step 7 in the window that appears, and then click Next.

11. After joining the [Homegroup], open the [Computer] window, and you can see the members of the homegroup in the lower left corner; From here, click the name of the computer in the homegroup to open the shared content.

Here's how:

The method is as follows: 1. First of all, find "My Computer" on the desktop, right-click it, and find "Properties";

2. Then on the right side of the interface, that is, after the computer name, find the change settings, and click to enter;

3. Enter the computer name interface, and then click Computer Change;

5. Open the window icon on the "My Computer" on the desktop and click Settings;

6. Then find the "Network & Internet" setting option and open it;

7. Find "Network and Sharing Center" on this page and click to enter;

8. Then click on the "Change Advanced Sharing Settings" option;

9. Finally, check the "Enable Network Discovery" and "Enable File and Printer Sharing" in the submenu bar, click Save, and the LAN will be set, this method is suitable for multiple computers to set up LAN.

Step 1: On the computer with the printer, click the win button in the lower left corner, or go directly to the control panel and find the device and printer.

Step 2: In the control panel, you can see all the devices connected to your computer and find the printer you want to share.

Step 3: Set up the sharing of the printer, right-click on the printer, find the properties, then switch to the sharing option, select [Share this printer], and set a sharing name (remember the sharing name).

Step 4: To go to your computer's advanced tethering, find the Network & Sharing Center in the Control Panel, select HomeGroup & Sharing options, and click on it.

Step 5: Next, in your homegroup, select Change advanced sharing settings.

Step 6: Mark all the options in the picture, select Turn on Sharing, and turn off password protection sharing.

Step 7: At this time, the basic settings are almost the same, and you also need to go to set up the workgroup, click on My Computer, and right-click on the properties.

Step 8: Click Settings, then in the properties, change the working group below, if the working group referred to in Figure 3 is inconsistent, change it to consistent, and finally open the control panel, select to view and add printers to different devices.

1.Open My Computer.

2.Open the Control Panel.

3.Select Network & Internet.

4.Open the Network and Sharing Center.

5.Click on "Set up a new connection or network".

6.In the dialog box, select "Set up wireless temporary". and click "Next".

8.Enter the network name and security key, and click Next.

Connect them all with switches, set the IP of each computer, preferably from between to 225, not the same, and set the subnet mask to.

The gateway is set to be OK or not, and then the working group should be the same, the front printer is set to share, and other computers want to add printers if they want to print, select the network printer, the next step, the next step, OK

Please let me be your webmaster! Anyway, more than 20 computers have to be managed.

Do you use a router?

Open Online Neighbor Set up a home or small office network A page pops up Next Select Next"Use file and printer sharing"Next Next Tick the Next Wizard to complete the next step and prompt to restart the computer, each of which is done once.

The next step is to share the file you want to give to someone else, right-click on the file, and select it"Sharing and security"After that, a page pops up and ticks the box"Share this folder"After that, you can see the files in other people's online neighbors.

Share printers.

Check the IP address of the foreground computer (Start Settings, Network Connection, Local Connection, pop up a page, click Support at the top, and note the IP address).

Go to another computer (Start Searching Files & Folders Pop up a page in the bottom left corner.)"Computers"Enter the IP you wrote down before to search Double-click on the search result Now you can see the printer you want to share, right-click on the printer to connect).

A homegroup is a group of PCs on your home network where you can share files and printers.

You can protect your homegroup with a password, you can change the password at any time, and no one else can change the files you share unless you give them permission to do so.

After you create or join a homegroup, you can choose which libraries you want to share (for example, My ** or My Documents). You can prevent specific files or folders from being shared, and you can share other libraries later.

File sharing between multiple computers in the home is a small local area network.

After reading the landlord's question, I was happy to answer the landlord's question.

You can rebuild a local area network, and if the computer on the network does not have the netbios component enabled, you will not be able to see your online neighbors. Or maybe they accidentally changed the name of the workgroup to which their computer belongs.

You see if it's not a family group. If it's a homegroup, then see if it's the firewall or the reason for killing the soft. Hope you can get it done soon!

All other computers must join HomeGroup, and network discovery will be enabled and password services will be turned off.

I also encountered the same problem in the company, different departments need to set up their own different homegroups in the same LAN.

In the computer network tethering center under advanced sharing settings, set the first option network discovery to "turn off network discovery", after turning it off, you can recreate the second homegroup, after the homegroup is created, come back here and set the network discovery to "enable network discovery", and then you can use other computers in the same local area network to search and join the second homegroup.

First of all, you need to have a homegroup on the network, if you don't have one, you will create one, and then you will be given a password, which you will enter when you join the homegroup.

Then join the homegroup, generally when you open Explorer, there is a homegroup in the navigation bar on the left, if not, open it in turn: Control Panel——— Network & Internet--- Network & Sharing Center——— select HomeGroup & Sharing options. If you have a homegroup on the network, you can simply click to join and enter the password.