What is Brief Notation? What is a Short Sheet Song?

1. T: Blowing method for flutes and other wind instruments. One is "Tuyin", which is represented by "Tu" or "T" on the score; One is "bitter", which is represented by "bitter" or "k" on the score.

2. The Boeing mark, to be exact, is the "upper Boeing mark".

"wave" means "wave", which means that the sound should be quickly alternated with the adjacent sound above. You've got a fast 676 in the score, and the last 6 is in time.

If you add a vertical in the middle of this mark, it becomes a "lower Boeing" mark, which should quickly alternate with the adjacent sound below.

3. Attaching points, its function is to extend the time value of the basic note by half. For example, the original sound is one beat, and after adding the dots, it becomes one and a half beats; The original note was two beats, but after adding the dots, it became three beats; The original note was half a beat, but with the addition of dots, it became a three-quarter beat.

4. Ventilation mark, which requires ventilation at the place with this mark.

5. I don't understand what you want to ask, it's a normal beat, but the first half beat becomes a rest. This is called a "weak rise" beat, or a second half beat.

6. The small note in front of it, called "leaning tone", is a kind of ornamental sound, which is very short when playing, passing by, and quickly connecting with the original note.

The latter mark, called the rising mark, is a type of "diacritical mark" that indicates that the note with this mark will be raised by a semitone.

There are five diacritical marks, but only three are used in the notation: sharp, flat, and reductive.

7. The last parenthesis, ignore it, it's obviously a typographical error, or a notationist's mistake.

How does a notation indicate the length of a sound?

In the notation, these seven basic notes not only indicate the height of the tone, but also the basic unit of the time value, called quarter notes, and the other notes are based on the quarter notes, with a short dash"-"and attachments"·"Denote.

1.Simple notes.

In notation, if the length of the note is a short dash"

representation, it is called a simple note. In addition to quarter notes, simple notes come in the following two forms:

Add a dash to the right of the basic note to indicate the time value of a quarter note. This type of short horizontal line that is added to the right side of the note and increases the value of the note is called a time line. The more time lines, the longer the time value of the notes.

Add a short dash below the basic note to indicate half the value when the original note is shortened. This type of short horizontal line that is added below the note and shortens the time value of the note is called a subtracted time line. The more time markings, the shorter the time value of the note.

The names of simple notes are based on the whole note. For example, one-half of a whole note is called a half note, a quarter of a whole note is called a quarter note, and so on.

2.Dotted notes.

In notation, a small dot is added to the right of a simple note that increases the value of the note"·", called attachments. Notes that are marked with dots are called dotted notes.

The dot itself does not have a certain length, and its length is determined by the simple note that precedes it. The significance of the dot is to increase the original note by half of its value, and is often used after quarter notes and various notes smaller than quarter notes.

In notation, simple notes larger than a quarter note are usually denoted by a time increase instead of a dot. For example: dotted half note: x, no"x-

Denote. A simple note with two points is called a punt note, and the second note represents half of the value of the first point, which is a quarter of the note's value.

Attachment points are often used in instrumental compositions and are rarely used in songs.

Notation refers to a simple notation. There are two types of alphabetical notation and numeric notation.

It originated in France in the 18th century and was refined by the Germans to become what it is today. Generally speaking, the so-called simple notation refers to the digital simple notation. The numeric notation is based on the movable roll-call, which represents the 7 basic levels of the scale, and is pronounced as do, re, mi, fa, sol, la, and ti (si in China), and is represented by C, D, E, F, G, A, B, and 0 for rest.

The time value of each number is equivalent to a quarter note of a staff.

Essentials:

Generally speaking, there are four basic elements in the composition of all **, and the most important of them are "the pitch of the tone" and "the length of the pitch":

1. The pitch of the pitch: Any piece of music is composed of high and low tones, straight from the piano is the lower the keyboard tone to the left, and the higher the keyboard tone to the right. In the case of numeric notation, there are a number of dots directly above or below the number, and the number of dots can be understood as intensity, the more the stronger, above it for the treble and below it for the bass.

The principle is expressed as a wavelength, the higher the sound wavelength, the shorter the wavelength, and vice versa.

2. The length of the tone: In addition to the height of the tone, there is also an important factor that is the length of the tone. The high and low tones and the annotation of the length determine that the piece is different from other pieces, so it has become the most important basic element of the composition. The principle is expressed in the length of time of the sound.

3. The strength of the sound: The strength of the sound is easy to understand, also called intensity. There will always be some notes in a ** work that are stronger and weaker in some places.

And the change of dynamics is one of the factors that express emotions in ** works. The principle is expressed in the magnitude of the amplitude.

4. Sound quality: It can also be called timbre. That is, the instrument or vocals that make **. For the pitch of the same melody, boys and girls sing different timbres; The sound of a violin is not the same as that of a piano.

These four items form the basic elements of any piece. It should be said that the simple notation can basically label these basic elements correctly.

Sheet music: A sheet music that uses Arabic numerals for musical notes. Simplified notation refers to a simple notation of Chinese celery.

Staff: It is a common notation in the world, by marking five parallel horizontal lines at equal distances with different time values.

Guqin score: Guqin score was first recorded in Wenbu Chi characters, which is a text selling cheat score. Text notation is to use words to describe the fingering, chord sequence and harmony of the guqin playing.

Phonemic Staff: Recording the height of phonemes in different positions according to fixed lines, which was first seen in ancient Greece. I use it above the lyrics at that time.

Score: Text.

Notation refers to a simple notation, and there are two kinds of notation: alphabetical notation and numeric notation. The notation is used to represent the 7 basic levels of the musical scale, pronounced as do, re, mi, fa, sol, la, ti, and the English is represented by C, D, E, F, G, A, B, and the rest is represented by 0, and the time value of each number is equivalent to the 4th note of the staff.

In the notation, various notes of different time values are used to indicate the length of the note. The dash added to the right of the note is called a value line, and a value line adds the time value of a quarter note. The horizontal line added to the bottom of a note is called an impairment, and an impairment line reduces the value of a thick note by half.

Each piece is marked with a key signature at the top left. For example, "1 C", "1 D", and "1 C" mean that the "C" on the keyboard is used as the "1" sound, that is, the 1 tone is sung as high as the C note, and the other tones are based on this tone, which is called C key. **In addition to the pitch and length of the tone, there is also the rest of the tone.

The symbol that indicates the rest of the sound is called the rest, which is marked with a "0".

It is used to denote Duolaimi.