What are the effects and functions of agarwood ash

Agarwood ash is the ash left after the agarwood incense is burned, and it is often smoked.

Friends, will save a lot of incense ashes, under normal circumstances, will be poured out of the way to deal with these agarwood ashes, in fact, these agarwood ashes are still useful.

Agarwood ash can be used as a base ash. Friends who often smoke incense know that when you put the lit agarwood incense into the unused incense burner, it is very easy to extinguish, because the new incense burner material is non-flammable. Spread some incense ash on the bottom of the incense burner, and then put the lit incense, it will not be easy to extinguish.

In the same way, it can also be used for incense or incense seals.

Agarwood ash can be used as fertilizer. The ashes of natural agarwood incense can be buried in the soil to be used as fertilizer for plants.

It should be noted here that some people have used agarwood ash to stop bleeding or take it before, which is very indispensable, and the incense ash of agarwood does not have this effect. In fact, agarwood ash not only cannot cure diseases, but is harmful to the body. Even natural agarwood products are made from a mixture of wild agarwood and other natural woods such as nanmu bark, which contains a lot of potassium.

When a person takes incense ash, potassium ions in the gastrointestinal tract.

Rapid increase can cause toxic gastroenteritis.

In addition, in the unburned incense ash, there are phenolic substances, which can damage the central nervous system of the person.

Causes symptoms such as convulsions. If it is used for wound hemostasis, although it can play a certain role, the wound is very easy to be contaminated, and harmful substances may also enter the blood and cause human poisoning.

The first is to use incense ash to develop a heating stove. Leaving the ash inside the Buddha statue will keep the fragrance of the Buddha statue alive, and burning in the new product will make the fragrance linger for a longer time. The second effect is that the ash accumulates and can be used as a base ash.

Beeswax is burned in Buddha statues that have never been used.

, it is more difficult to illuminate, and it is easy to extinguish. If the material of the new Buddha statue is generally not easy to ignite, in this case, the bottom of the Buddha statue is covered with a layer of incense ash, and then the incense is ignited, so that it is not easy to extinguish. The third effect of incense ash is that it can be used as a high-grade fertilizer in indoor bonsai.

Some people on the Internet think that using beeswax incense ash to invigorate the blood or take it, in fact, incense ash does not have these two effects. Most incense products are made of fir or other pure natural wood blends, and there are also colorful potassium compounds in it. Therefore, it does not have the effect of invigorating blood.

I also learned a lot of agarwood knowledge after I found the incense supreme.

The incense ash of agarwood can reflect the quality of the incense to a certain extent. Many people's understanding of agarwood may start with incense sticks, so the first impression formed by the first incense stick is particularly important. If it is not good to judge the quality of agarwood incense, you can look at the color and shape of the incense ash.

The freshly burned incense ash will not be hot if it has residual temperature, and if it is hot, it may add chemical ingredients; The color is naturally good, and there may be additives if it is too white or too black;

The incense ash can be used as the bottom ash to facilitate incense insertion and incense, so as to ensure that the incense sticks are fully burned, and will not leave an unburned part that is not easy to dispose of and thrown away for waste every time. In addition, if there are no special requirements for incense ash, it can also be used as the bottom ash of incense seals. If you burn incense regularly, you can leave a certain amount of incense ash in the incense burner, and at the same time as burning incense, the incense ash can transmit the temperature of the smoke.

Just a little temperature does not keep the incense burner in a cold state, which can make the aroma in the furnace rotate, especially when the new incense is burned, which helps the aroma to mellow and linger. Incense ash contains potassium, which is the best fertilizer for plants. It can promote the bulb development and expansion of bulbous flowers, and the plant is strong and not easy to lodging.

When used, it can be applied directly, without fermentation, and the fragrant ash is slow and soft to make fertilizer, and will not cause fertilizer damage to the plants. I usually buy it at the incense supreme, and this is all real agarwood.

The third effect of incense ash:1. As a high fertilizer, it can be used in indoor bonsai Some people on the Internet think that beeswax incense ash is used to invigorate blood or take it, in fact, incense ash is a general incense product that has these two effects is made of fir or.

1. The efficacy and function of incense ash 1 Incense ash contains nitrogen, phosphorus, potassium and oxalic acid, which can make plants resistant to drought and cold when sprinkled into potted plants.

2. Take a scouring pad dipped in incense ash and rub it on the rusty place of the iron utensils.

3. Sprinkle the incense ash on the stovetop and wipe the oil with a damp scouring pad.

Lu Xun hesitated in his blessing and wrote, "She hit her head on the corner of the incense case, hit a big hole on her head, and the blood flowed, and she used two handfuls of incense ash and wrapped two red cloths to stop the bleeding!" It can be seen that in the past, people used incense ash to stop bleeding, but there was no scientific basis.

Incense ash has the following three functions:

1. Incense ash can be used as fertilizer, which contains potassium, which can promote the bulb development and expansion of the bulbous flowers of Brother He, and the plant is strong and not easy to lodging; It is also suitable for the nutrients needed for cactus succulents.

2. Incense ash can replace plant ash to smear plant wounds and play an antiseptic role. Apply a small amount of incense ash at a time, which can be poured on the side of the pot, or combined with loose soil and turned into the soil.

3. The incense ash can wipe the dirt on the bottom of the pot. After wetting the pot with a small amount of water, apply an appropriate amount of incense ash, and leave it for 5 to 10 minutes to wipe off the dirt on the bottom of the pot.

The main components of incense ash are potassium, calcium and other inorganic substances, function: can be used to raise flowers and stop bleeding.