What to do if something falls into a gap, what to do if a phone falls into a gap

<> there will inevitably be some mistakes in life, but most mistakes can be solved, as long as you think about it. If something falls into a gap, you can try the following:

1. If it is a gap formed by a movable object, you can directly remove the object and take it out with your hands.

2. If the object is immovable and the gap is not large, it can be clamped out with a long clip or hook.

3. If the dropped item is a metal object, you can use a rope to tie a magnet and use magnetic force to suck it out.

If something falls into the gap, this specific need to see what kind of thing it is, what type of gap it falls into, if it is a small object made of steel falling into the gap, you can try to see if it can be sucked out with a magnet, if it is some other small object, you can also try to use a small hook or a small wire to see if it can be hooked out, and then not to see if the gap can be expanded with some tools, so that you can put your hand in it to take it out, In addition, for some buoyant objects, you can also try to fill water to see if it floats up, which is also convenient to take out.

If it's a metal thing, you can use an iron to suck it out, and if it's a lighter thing, see if you can flush it out with water? It can be hooked out with a thin wire.

Things that fall into the gaps are generally small, so you can also find something sticky and stick it out, or you can choose something softer, squeeze it out, and slowly fill it in, so that it will not cause harm to the thing, and you can also get the thing.

If the dropped item contains metal, you can actually use magnets.

Because the magnetite has a strong adsorption force; If the dropped object does not contain metal, you can also tie the tape to the stick and use the adhesive tape to slowly absorb the item; If that still doesn't work, it is recommended to borrow a long clamp from the plumbing staff.

1. Magnet.

If the falling object is metalwork, it can actually be sucked up with a magnet. The suction power of magnet is relatively strong, as long as the falling thing is not heavy, it can generally be adsorbed. Find a larger magnet, tie the magnet to the long stick, and slowly reach the stick into the gap to pull things up.

2. Adhesive tape. If the dropped object is not metal, or if there are no metal parts inside, you can try it with adhesive tape. Tie the tape backwards to the stick, wrap it around a few more times, and slowly reach into the gap after tying it, and stick it on the object.

However, due to the limited adhesion of the tape, it is not easy to stick to heavy items.

3. a clip. If the dropped item is not metalwork and is heavy, you can also try using clips. Use the slender clip to slowly reach into the gap, aim at the dropped item, find a suitable angle and slowly clip the item up.

This kind of long clamp is generally relatively rare, you can go to the staff who unclog the pipe to borrow it.

If something falls into the crack, the first thing to do is to find a clip or a hook to get it out.

Something has fallen, and there are many ways to get it in the seam. For example, the easiest way to do this is to clip it out with tweezers. If it is really not clamped with tweezers.

You can use a sticky plastic swab. Glue out what falls into the gaps. If that doesn't work.

You can only use violent methods. It is to use a shovel to break up the stones around the gap, so that the gap is widened, and the things are taken out.

It's okay, don't worry about it, the inner gap is empty underneath, and it will fall directly to the floor.

If you can, you can dismantle it. If you can stick it, you can stick it. Magnet.

Summary. Hello, dear, <>

If your phone falls into a gap, you can try the following:1Use a small tool, such as a toothpick or needle, to remove as much dust and debris as possible from the top and sides of your phone; 2.

Try vacuuming or blowing away the air around your phone with a vacuum cleaner or hair dryer so that your phone pops out of the cracks; 3.Try to remotely control the lost phone with another phone or computer so that it makes a sound or vibrate so that you can find it and remove it; 4.It can be handled using professional tools or following the advice of a hardware engineer.

Either way, you need to be careful to avoid causing more damage to your phone!

What to do if your phone falls into a gap.

Hello, dear, <>

If your phone falls into a gap, you can try the following:1Use a small tool, such as a toothpick or needle, to remove as much dust and debris as possible from the top and sides of your phone; 2.

Try vacuuming or blowing away the air around your phone with a vacuum cleaner or hair dryer so that it pops out of the gap between your limbs; Liran Group 3Try to remotely control the lost phone with another phone or computer so that it makes a sound or vibrate so that you can find it and remove it; 4.It can be handled using the tools of a professional segment bucket or by following the advice of a hardware engineer.

Either way, you need to be careful to avoid causing more damage to your phone!

Oh, I'll send you a ** to show you how to take the gap? I don't have clips in my house, just some slender stuff.

If you don't have a clip, you can try the following methods:1Using a slender stick or chopsticks, pry the fabric through the gap and remove it by hand.

2.If the gap is small, you can use a card or cardboard to roll the fabric out of the gap. 3.

If the gap is too small, try rotating the slender thing around the fabric gap and then slowly take it out. Hope you find these suggestions helpful!

It's right inside this crevice.

You can only take this one apart and take it out.

Or see if it has fallen to the bottom and hook it with a thin wire.