I want to use a Bluetooth headset to connect to the computer, after turning on the Bluetooth headset

Hello, generally this situation is that the computer does not install the Bluetooth driver and Bluetooth software correctly, or it does not boot up after installation, and it does not start manually, so some cases are unable to search for Bluetooth headsets, some cases are found to Bluetooth headsets but can not be paired and connected, and some are unable to use Bluetooth headsets after pairing and connecting** sound. It is recommended to re-install the Bluetooth driver and software, and then install all the Bluetooth-related drivers and software from the official website, and it is necessary to ensure that the boot is started or manually started after booting, and some optimization software will stop the Bluetooth driver software, which should be noted. Generally speaking, as long as the driver and software are installed correctly, there will be no problem after normal connection.

I used it at the beginning when you were in this situation.,I remember that there should be no Bluetooth management software installed.,I just went to the official website of the notebook and installed all the software of Bluetooth.,I don't know which one is the management software.。 Or you installed it, but it didn't start normally, there is a Bluetooth icon in the lower right corner of the desktop after starting, and a lot of options will pop up after right-clicking, there is an audio connection inside, and the headphones can be used after clicking on the connection. You can explore it a little more, I also figured it out for a long time.

If you have paired it before, it will automatically connect when you turn on Bluetooth.

If you haven't connected the Bluetooth headset yet, there will be an extra headphone logo if you connect it.

The current Bluetooth headset is generally above If your computer Bluetooth version is not enough, it will not be able to connect.

After that, remember to update the Bluetooth headset driver at any time and then take a look.

How to connect a notebook to a Bluetooth headset].

Turn on the Bluetooth headset, then turn on the Bluetooth device of your laptop, use the Bluetooth control software to search for the Bluetooth device, find the headset and pair it, and pair it after the pairing is successful. And in the sound device, a Bluetooth headset will be displayed.

Let's talk about the general operation method. I'll take the win7 system and Nokia Bluetooth headset as examples.

First of all, make sure that the Bluetooth of the computer is turned on, the Bluetooth light is normal, and turn on the switch of the Bluetooth headset.

<>7, you can see that the option of the headset is not ticked at this time, so you can't use the Bluetooth headset to listen**, be sure to check, after checking, the system will prompt the installation of the driver, after the driver is successfully installed, find the speaker icon in the lower right corner of the system and click the right button - "**device", you can see the Bluetooth audio option. (Figure 7).

8. It can be seen that the default **device at this time is a built-in speaker, and Bluetooth audio must be used as the default **device to use Bluetooth headphones to listen**. (as shown in Figure 8) After all the settings are completed, you can use the Bluetooth headset to listen to the computer.

The above is the operation steps for connecting the laptop to the Bluetooth headset under the win7 system.

The bluetooth headset has failed to connect to the computer, but the sound still comes out of the banquet and argues that the solution is as follows:

1. Open the desktop and click the start button in the lower left corner.

2. Then click on the Control Panel button. Shortage.

3. Enter the control panel and select the sound button.

4. On the sound selection page, select the Bluetooth headset on your opinion connection.

There may be a variety of reasons why the computer connection to the Bluetooth ear fails to fail, and the following are some possible reasons and solutions:

Bluetooth headset does not turn on pairing mode: Some Bluetooth headsets need to manually turn on pairing mode to be discovered by the computer, if the headset is not in spring to turn on pairing mode, the computer cannot connect. The solution is to check the earphone manual and follow the instructions to turn on pairing mode.

Bluetooth driver issues on your computer: There may be a problem with your computer's Bluetooth driver, which prevents you from connecting to your Bluetooth headset. The workaround is to update or reinstall the Bluetooth driver.

Bluetooth headset is too far away from the computer: Bluetooth technology has a limited effective range, and if the Bluetooth headset is too far away from the computer, the connection cannot be established. The workaround is to hold the headphones close to the computer and make sure there are no obstructions between the two.

Bluetooth headphones connect with other devices: If Bluetooth headphones are already connected to other devices, such as a phone or tablet, the computer can't connect. The workaround is to turn off the Bluetooth connection of the other device or remove the pairing information of the other device from the Bluetooth headset.

Bluetooth is not turned on on on your computer: Some computers do not have Bluetooth turned on by default and need to be manually turned on to use it. The solution is to turn on the Bluetooth function on your computer.

Incompatible Bluetooth version: If the Bluetooth headset version is too low, it may not be compatible with the Bluetooth version of your computer. The workaround is to upgrade the firmware of the Bluetooth headset or buy a new one.

If the above methods do not solve the problem, it is recommended to contact the relevant manufacturer or repair center for help.

Main reasons: 1. The Bluetooth phone is not paired successfully.

Solution: The Bluetooth headset and the computer must be equipped with a successful pair before it can be used.

Second, caused by setting problems.

3. Caused by mute or too low volume.

Solution: Turn on the sound and increase the volume.

Fourth, the computer Bluetooth driver problem.

Solution: Install the driver according to the Bluetooth hardware model.

5. Caused by damage to Bluetooth headsets. For example, the Bluetooth phone is physically damaged.

Solution: Replace the Bluetooth headset.

6. Cracked limbs caused by computer infection viruses.

Workaround: Anti-virus software.

All-round antivirus. 7. System failure caused by computer.

Workaround: System Restore.

Or re-computer guess Sakura's computer operating system.

8. The Bluetooth module of the computer is damaged. Only disassemble and replace the Bluetooth chip.

Here take win7 system as an example, first, open the "Control Panel - Devices and Printers", right-click on the Bluetooth device (if the device has been added) - delete, if the device has not been added before, this step can be omitted.

Second, add a device, open the "Control Panel - Devices and Printers - Add Device" At this time, your Bluetooth device should turn on the Bluetooth jujube switch and be in a discoverable state, at this time, in the "Add Device" dialog box, you can see the Bluetooth device that has been searched, select it and click "Next".

3. There are three options in the pop-up box: the first item is a device that requires the default pairing state of the sail cavity with the morning shirt code "0000" or "1234", the second item is a device with a digital input key, and the third item is other. Select the second item (optional for Bluetooth keyboards) - Next.

There is a problem with the Bluetooth headset on the computer, is it because you have the traffic or the network? Because if you connect to Bluetooth, you also need to open the network, so you can use it normally.

If there is a problem with the Bluetooth headset in the computer, you need to detect whether the Bluetooth or Bluetooth transmitter of the computer is operating normally, and then detect whether the Bluetooth is opened and the silver balance machine is disassembled and connected, and the Bluetooth matching is searched for connection and use.

If you have a Bluetooth headset, as long as you connect to the Chazhou cherry or the book of the book, there will generally be no problems. That is, if. In other words, if you have problems connecting to the computer, then you need to recheck the next song.

This is a compatibility problem caused by the low version of the Bluetooth receiver on the computer! Just get a matching Bluetooth receiver!

One is two-channel stereo, and the other is mono at the same time you can use the microphone on the headset, ** automatically switch mono when you call.

Bluetooth headset Xiang assigned this problem on the computer,Generally speaking, Bluetooth mobile phones are connected to mobile phones,And electric hail brain can also be congratulated to establish a connection,But you have to set it up。

Is there a problem with the bluetooth headset on the computer? Bluetooth headsets cannot be used on computers, because electric Bluetooth headsets can only be used on mobile phones.

There is a problem with the bluetooth headset on the computer, what is the problem with the bluetooth headset on the computer? If there is no sound. It may also not be well connected.

There may be one device that requires software to install the headset in order to use it and another that is ready to use.

Oops, is there a problem with the headphones on the computer? I? I don't think there's much of a problem with Bluetooth headphones on a computer in general.