The display needs to be configured by Samsung s Samsung BX2231

After reading your supplement, give the landlord the following two configurations of about 4000 yuan (you can refer to each other to change, the motherboard and memory are very good brands, the graphics card looks like you, Huntkey's power supply needless to say, with a Jinhetian or Big Buffalo's chassis is enough):

AMD Configuration:

CPU AMD Athlon® II X3 440 Boxed Motherboard MSI 880GM-E41

Memory: Apacer DDR3 1333 2G

HDD WD 500G SATA2 16M Blue Disk.

Graphics card Sapphire HD4830 1G GDDR5**Edition GT240 X5 V20

Optical Drive Pioneer ***-230D Extreme Flash.

Keyboard and mouse combo Optional.

Display Samsung BX2231

Chassis Optional.

Power Huntkey Calm King Diamond Win7 Edition.

Intel Configuration:

CPU Intel Core i3 530 Motherboard MSI H55M-P31

Memory: Apacer DDR3 1333 2G

HDD WD 500G SATA2 16M Blue Disc Graphics ZOTAC GT240-512D5 Destroyer Optical Drive Pioneer DVR-218CHV

Keyboard and mouse combo Optional.

Display Samsung BX2231

Chassis Optional.

Power Huntkey Calm King Diamond Win7 Edition.

Do you mean the parameters of the Samsung bx2231 or what?

Samsung BX2231 basic parameters.

Screen size inches.

Aspect ratio 16:9 (widescreen).

Best resolution 1920 1080

Panel type tn

Backlight Type: LED backlight.

Grayscale response time of 2ms

Display parameters: Brightness 250cd

Viewing angle 176 170°

Display colors.

Plug-and-play monitor on the ATI Radeon HD 4250. This one is exactly what is in use. to enter the graphics card section.

It would be nice to be able to adjust it to full screen, almost not completely, and the buttons on the monitor can be adjusted. The best resolution provided by the display is for reference only, and some graphics cards may not support it. As long as it can be stable in full screen, it's fine.

In addition, there are products on the stationmaster's group **, cheap ***.

That's right, find a white screen with a border, and do auto or reset.

For example, you can open an execl and you don't need to do anything to do auto or reset is the best setting.

Restore the default settings or factory settings.

First of all, the concept of response time: the speed at which each pixel of the LCD reacts to the input signal, that is, the time it takes for the pixel to change from dark to light or from light to dark. The often said 25ms、16ms refers to this reaction time,The shorter the reaction time,The less the user will have the feeling of tail dragging when watching the moving picture。

However, the response time between black and white of the LCD panel is the fastest, and the response time between other gray scales is also the response time of most of the different color changes, which is much slower than that between black and white. - The general call-up response time for later evolution will be gray-scale response time. The industry thinks this is more standard!

It stands to reason that you adjust the response time to the fastest, it should mean that there should be no drag or the like, it will be the clearest But it should be because the response time you are using now is 2ms, which is too short, not all liquid crystal molecules can be deflected to the same angle in such a short time, so there will be the flower screen you said now!

Because you should be using the recommended frequency of the display1920 1080,If so,60Hz is already the limit,1920x1080 75HzThese are already a lot of LCD screens acceptable range,So the general manufacturers will limit1920x1080 60 or more timing。