What are the standards for protective footwear? What certifications are required?

To be trusted** certified.

The latest implementation standard for "Foot Protection Safety Shoes" was released on July 23, 2020 and officially implemented on August 1, 2021. The new standard replaces GB 21146-2007 "Personal Protective Equipment - Professional Shoes", GB 21147-2007 "Personal Protective Equipment - Protective Shoes", GB 21148-2007 "Personal Protective Equipment - Safety Shoes", GB 12011-2009 "Foot Protection - Electrically Insulated Shoes", and integrates GB 21146-2007, GB 21147-2007 and GB 12011-2009.

The new standard will be implemented on August 1, 2021, representing the unified implementation of protective shoes, electrically insulated shoes, occupational shoes, etc., let's take a look at the changes in the new standard.

1. The scope of application has been revised, and the new standard has added provisions on the style, marking and protective performance of safety shoes, and deleted the article "this standard is not applicable to safety shoes without insoles and insoles or without insoles but with removable insoles".

Second, some safety footwear terms have been added and deleted, and the new standard has deleted the four terms of "conductive shoes", "anti-static shoes", "electrically insulated shoes" and "fuel oil", and added the term "hybrid shoes".

3. The four terms of "safety shoes", "leather", "polymer material" and "protective Baotou" have been modified, and the new standard has deleted the requirements for the impact resistance and pressure resistance of safety shoes to protect Baotou.

Fourth, the protective performance marking symbol has been added and modified, and the new standard has improved the Chinese and English marks of the protective performance of safety shoes.

Fifth, the anti-slip requirements have been added, and the new standard has increased the anti-slip requirements for safety shoes. When tested on a ceramic tile surface with a detergent solution, the coefficient of friction should be greater than or equal to that when the heel of the safety shoe slides forward; When the safety shoe slides forward horizontally, the coefficient of friction should be greater than or equal to.

The latest national standard for safety shoes is GB21148-2020. The new national standard was officially implemented from August 1, 2021 to 2021. At the same time, the new national standard GB21148-2020 replaces GB12011-2009, GB21146-2007 and GB21148-2007.

The previous national standard was abolished.

The latest national standard for safety footwear is GB21148-2020. The new national standard was officially implemented on August 1, 2021. At the same time, the new national standard GB21148-2020 replaces GB12011-2009, GB21146-2007, and GB21148-2007.

The previous national standard has been abolished.

Safety footwear standard, which will officially enter into force in June 2012 and replace the old safety footwear standard ENISO20345:2004 A1:2007.

The whole set of standards has new requirements in 23 places, such as the test method of hexavalent chromium, the test method of non-metallic puncture resistant soles, and the thermal and cold insulation performance of safety shoes.

Different regions and countries have slightly different production standards and specifications for safety shoes. The most common standards are the following.

1. European Common Market Safety Specification Standard (EN344 1:1992).

According to the testing methods and specifications of this standard, safety shoes can be divided into 3 types:

1992: Safety shoes for professional use, with a steel plate built into the toe cap to resist impact forces equal to 200 joules (j).

EN346 1:1992: Protective footwear for professional use, with a steel plate built into the toe cap, capable of resisting impact forces equal to 100 joules (J).

EN347 1:1992: Work shoes for professional use without steel plates in the toe cap.

2. The American standard (ANSI-Z41-1991) can be divided into three types according to the resistance of shoes to compression and impact.

Choice of protective footwear:

1. It is recommended to choose a powerful big brand, such as Aoxiang, Shouhu or Laiam, which has its own factory, many years of experience in the production of labor protection shoes, and large enterprise customer cases.

2. Look at the qualifications, generally large and medium-sized enterprises, the suitability of bidding, and strict requirements for the qualification of labor protection shoe manufacturers, from registered capital, to certification certificates, to industry cases.

3. Look at the test report, ask for the test report of the labor protection shoes, see if it is updated regularly, and see if the company on the test report is consistent.

Use of protective footwear:

1. Frequent replacement, it is recommended that manufacturers with conditions replace it once in March. Do not exceed 6 months. For too long, the protective functions of protective shoes may be affected or invalidated.

2. Pay attention to personal cleaning, because of the particularity of protective shoes, the general air permeability is slightly poor, and it is easy to breed bacteria, so it is recommended to dry more.

3. Regularly check whether the values of protective shoes are invalid. Above.

The domestic standards for shoes are:

GB T 24152-2018 "Basketball and Volleyball Professional Athletic Shoes", GB 21146-2007 "Personal Protective Equipment - Professional Shoes", GB 21147-2007 "Personal Protective Equipment - Protective Shoes", GB 21148-2007 "Personal Protective Equipment - Safety Shoes", GB 21536-2008 "Athletics Athletics", GB T 20096-2006 "Roller Skates", QB T 4553-2013 "Light Hiking Shoes", GA 313-2001 Police Shoes Male Fur Shoes, GA 315-2001 Police Shoes Rubber Boots, GA 310-2010 Police Shoes Women's Singles Leather Shoes, GA 311-2010 Police Shoes Men's Cotton Shoes, GA 312-2010 Police Shoes Women's Cotton Shoes, GA 309-2010 Police Shoes Men's Single Leather Shoes, QB T 4548-2013 Golf Shoes, T zzb 0649-2018 Canvas Shoes, QB T 4549-2013 Skateboard Shoes , HG T 4905-2016 "Tennis Shoes", GB T 19707-2005 "Ice Skate Shoes", T ZZB 1359-2019 "Protective Shoes", HG T 2182-2008 "Cotton Rubber Shoes", GA 571-2010 "Police Shoes - Women's Leather Sandals", HG T 4809-2015 "Cross-Country Rubber Shoes", HG T 4906-2016 "Badminton Shoes", GB T 33313-2016 "Children's Rain Boots (Shoes)", T zzb 0867-2018 "Children's Leather Sandals", T ZZB 0967-2019 "Children's Cloth Shoes", QB T 5301-2018 "Campus Shoes for Primary and Secondary School Students", QB T 4332-2012 "Craft Shoes", HG T 2016-2001 "Basketball and Volleyball Sneakers", HG T 2870-2014 "Table Tennis Sneakers", GB T 19706-2015 "Football Shoes", HG T 5294-2018 "Rubber and Plastic Shoes for the Elderly", QB T 2880-2016 "Children's Leather Shoes", GB T 15107-2013 "Tourist Shoes", QB T 1002-2015 "Leather Shoes", etc.

The relevant shoe test and inspection standards are:

GB T 3903 series standard, QB T 2224-2012, QB T 2882-2007, QB T 2886-2007, HG T 2871, HG T 2872, etc.

Protective shoes have the effect of protecting the feet. Protective footwear and steel-toed protective footwear are the same kind, i.e., safety protective shoes that protect the toes. Safety protective shoes and labor protective shoes are both foot safety protection, which also means the same thing.

There are many types of them, such as toe protection, puncture resistance, insulation, acid and alkali resistance, etc.

The selection and maintenance of protective shoes should be carried out according to the nature and degree of harm of the working environment. Protective shoes should have a product certificate and product manual. Before use, the instructions should be read according to the omissions and conditions of use, and the use method should be correct.

Special protective shoes should be inspected and kept clean after use, and stored in a pollution-free and dry place. The sole of protective shoes is generally made of polyurethane material one-time injection molding, which has the advantages of oil resistance, anti-smashing and puncture-proof, wear-resistant, acid-alkali resistant, insulation, waterproof, and lightweight.

100 inspection of protective shoes testingProject.

Tensile test, impact resistance test, compression puncture test, salt water corrosion resistance test, flexural strength test, leather surface expansion test, water vapor permeability test, acid and alkali resistance, spitting hydrolysis test, oil resistance, puncture resistance and bending resistance, resistance test, insulation, cold resistance, waterproof test, cutting safety performance, high temperature resistance, anti-static performance, etc.

Protective footwear detection.

100 inspection of protective shoes testingStandard.

AQ T6108-2008: Selection, use and maintenance of safety, protective and occupational footwear.

ASTMF1818-2004: Specification for protective footwear for chainsaw users.

ASTMF2892-2011: Specification for performance requirements for protective footwear with soft toes (no safety No protective toes).

BSENISO20346-2004: Personal Protective Equipment Protective Footwear and Boots.

Guidelines for the selection, maintenance and use of protective footwear and socks.

DB37 T207-1995: Technical conditions for oil-resistant labor protective shoes.

DB37 T2006-2011: Safety technical requirements for ordinary labor protective shoes.

DIN190100-1995: Additional requirements and methods of use for occupational protective footwear.

GB T20991-2007: Test methods for personal protective equipment footwear.

GB21147-2007: Personal Protective Equipment Protective Footwear.

The production unit applying for the safety mark of special labor protection equipment (hereinafter referred to as the applicant unit) shall meet the following conditions:

1) Have a business license issued by the administrative department for industry and commerce;

2) Have a production site and technical strength that can meet the needs of production;

3) Have production equipment that can ensure product safety and protection performance;

4) Have testing and inspection equipment that can meet the requirements of product safety protection performance;

5) Have a sound quality assurance system;

6) Have product standards and related technical documents;

7) Its products meet the requirements of national standards or industry standards;

8) Other conditions provided for by laws and regulations.

Before understanding how to handle the LA Labor Safety Certification, let's first understand the LA Labor Safety Certification. What is LA Labor Safety Certification? Special labor protection equipment refers to the safety protection equipment that plays a special role in protecting the human body in the process of labor operation and production, and corresponds to ordinary labor protection equipment, such as protective glasses, labor protection shoes, etc.

Common special labor protection products include filtering gas masks, positive pressure air respirators, chemical protective clothing, impact masks, etc.

How to apply for LA labor safety certification? What are the application requirements for LA Labor Safety Certification?

1. Have the legal business qualifications of the country where it is located (business license, production license, qualification certificate, etc.);

2. The products manufactured shall comply with the current effective Chinese national standards, industry standards and relevant regulations;

3. Must meet the necessary conditions for production (production site, equipment, testing, management, etc.);

4. Must meet the necessary human resources conditions for production (operators, technicians, testing knowledge, management personnel, etc.);

5. Relevant technical, control and guiding materials necessary for the production of products;

6. There is a sound management organization, a sound management system and a product safety protection performance guarantee system;

7. Other conditions stipulated by laws, regulations, industry norms, standards, etc.

8. Domestic merchants, importers and other units;

9. Have a business license issued by the Chinese Administration for Industry and Commerce;

10. Have a valid and legal entrustment agreement or long-term and stable supply contract signed with the product manufacturer;

11. Have a sound contract management system;

12. Have a sound management organization and a sound management system;

13. The sales staff must be familiar with the safety protection performance and use methods of the products sold.

If you feel that the LA labor safety certification procedures are cumbersome, then you can handle the LA labor safety certification through Anhui Kairui Enterprise Management Consulting, which is professional and efficient, one-stop service, to help you easily solve the certification problem and obtain the authoritative certification certificate.